=> Bootstrap dependency digest>=20010302: found digest-20111104 => Bootstrap dependency fetch-[0-9]*: found fetch-1.7 WARNING: [license.mk] Every package should define a LICENSE. => Checksum SHA1 OK for Eterm-0.9.5.tar.gz => Checksum RMD160 OK for Eterm-0.9.5.tar.gz => Checksum SHA1 OK for Eterm-bg-0.9.5.tar.gz => Checksum RMD160 OK for Eterm-bg-0.9.5.tar.gz ===> Installing dependencies for eterm-0.9.5nb7 ========================================================================== The supported build options for eterm are: xim The currently selected options are: xim You can select which build options to use by setting PKG_DEFAULT_OPTIONS or the following variable. Its current value is shown: PKG_OPTIONS.eterm (not defined) ========================================================================== ========================================================================== The following variables will affect the build process of this package, eterm-0.9.5nb7. Their current value is shown below: * GIFLIB_IMPLEMENTATION = giflib * JPEG_DEFAULT = jpeg Based on these variables, the following variables have been set: * JPEGBASE (defined, but empty) * JPEG_TYPE = jpeg You may want to abort the process now with CTRL-C and change their value before continuing. Be sure to run `/usr/pkg/bin/bmake clean' after the changes. ========================================================================== => Build dependency libtool-base>=2.2.6bnb3: found libtool-base-2.2.6bnb6 => Build dependency kbproto>=1.0.2: found kbproto-1.0.5 => Build dependency xproto>=7.0.9: found xproto-7.0.18nb1 => Build dependency xcb-proto>=1.4: found xcb-proto-1.6 => Build dependency xextproto>=7.0: found xextproto-7.2.0 => Build dependency inputproto>=1.4: found inputproto-2.0 => Build dependency checkperms>=1.1: found checkperms-1.11 => Full dependency perl>=5.0: found perl-5.14.2nb5 => Full dependency libast>=0.7nb7: found libast-0.7nb7 => Full dependency imlib2>=1.4.5nb1: found imlib2-1.4.5nb1 => Full dependency libXext>=0.99.0: found libXext-1.1.1 => Full dependency libXmu>=1.0.0: found libXmu-1.0.5 => Full dependency libXres>=1.0.0: found libXres-1.0.4 ===> Overriding tools for eterm-0.9.5nb7 ===> Extracting for eterm-0.9.5nb7 ===> Patching for eterm-0.9.5nb7 => Applying pkgsrc patches for eterm-0.9.5nb7 ===> Creating toolchain wrappers for eterm-0.9.5nb7 ===> Configuring for eterm-0.9.5nb7 => Modifying GNU configure scripts to avoid --recheck => Replacing config-guess with pkgsrc versions => Replacing config-sub with pkgsrc versions => Replacing install-sh with pkgsrc version => Checking for portability problems in extracted files checking for a BSD-compatible install... /usr/bin/install -c -o pbulk -g pbulk checking whether build environment is sane... yes checking for gawk... /usr/bin/awk checking whether make sets $(MAKE)... yes checking for preferred libtoolize... libtoolize checking for preferred aclocal... aclocal checking for preferred autoconf... autoconf checking for preferred autoheader... autoheader checking for preferred automake... automake grep: ./src/netdisp.c: No such file or directory checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking for x86_64-unknown-linux-gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ANSI C... none needed checking for style of include used by make... GNU checking dependency style of gcc... gcc3 checking how to run the C preprocessor... gcc -E checking for egrep... grep -E checking for AIX... no checking for library containing strerror... none required checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking minix/config.h usability... no checking minix/config.h presence... no checking for minix/config.h... no checking for a sed that does not truncate output... /tmp/pkgsrc/x11/eterm/work/.tools/bin/sed checking for ld used by gcc... /usr/x86_64-unknown-linux-gnu/bin/ld checking if the linker (/usr/x86_64-unknown-linux-gnu/bin/ld) is GNU ld... yes checking for /usr/x86_64-unknown-linux-gnu/bin/ld option to reload object files... -r checking for BSD-compatible nm... nm checking whether ln -s works... yes checking how to recognise dependent libraries... pass_all checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for x86_64-unknown-linux-g++... g++ checking whether we are using the GNU C++ compiler... no checking whether g++ accepts -g... no checking dependency style of g++... none checking for x86_64-unknown-linux-g77... f77 checking whether we are using the GNU Fortran 77 compiler... no checking whether f77 accepts -g... no checking the maximum length of command line arguments... (cached) 2097152 checking command to parse nm output from gcc object... ok checking for objdir... .libs checking for x86_64-unknown-linux-ar... no checking for ar... ar checking for x86_64-unknown-linux-ranlib... no checking for ranlib... ranlib checking for x86_64-unknown-linux-strip... no checking for strip... strip checking if gcc static flag works... yes checking if gcc supports -fno-rtti -fno-exceptions... no checking for gcc option to produce PIC... -fPIC checking if gcc PIC flag -fPIC works... yes checking if gcc supports -c -o file.o... yes checking whether the gcc linker (/usr/x86_64-unknown-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes configure: creating libtool appending configuration tag "CXX" to libtool appending configuration tag "F77" to libtool checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... yes checking for f77 option to produce PIC... -fPIC checking if f77 PIC flag -fPIC works... no checking if f77 supports -c -o file.o... no checking whether the f77 linker (/usr/x86_64-unknown-linux-gnu/bin/ld -m elf_x86_64) supports shared libraries... yes checking dynamic linker characteristics... PKGSRC-WARNING: Something is trying to run the fortran compiler, PKGSRC-WARNING: but it is not added to USE_LANGUAGES in the package Makefile. GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking for distribution root... /tmp/pkgsrc/x11/eterm/work/Eterm-0.9.5 checking whether gcc needs -traditional... no checking for a BSD-compatible install... /usr/bin/install -c -o pbulk -g pbulk checking whether build environment is sane... yes checking whether to enable maintainer-specific portions of Makefiles... no checking if malloc debugging is wanted... no checking for sed... /tmp/pkgsrc/x11/eterm/work/.tools/bin/sed checking for rm... /bin/rm checking for cp... /bin/cp checking for chmod... /bin/chmod checking for tar... /bin/tar checking for mkdir... /bin/mkdir -p checking for ctags... true checking for ar... ar checking for mv... /bin/mv checking for tic... tic checking whether ln -s works... yes checking for perl... /usr/pkg/bin/perl checking for gawk... (cached) /usr/bin/awk checking for an ANSI C-conforming const... yes checking for inline... inline checking whether byte ordering is bigendian... no checking for X... libraries , headers checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking for sys/wait.h that is POSIX.1 compatible... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/sockio.h usability... no checking sys/sockio.h presence... no checking for sys/sockio.h... no checking sys/byteorder.h usability... no checking sys/byteorder.h presence... no checking for sys/byteorder.h... no checking malloc.h usability... yes checking malloc.h presence... yes checking for malloc.h... yes checking utmpx.h usability... yes checking utmpx.h presence... yes checking for utmpx.h... yes checking for unistd.h... (cached) yes checking bsd/signal.h usability... no checking bsd/signal.h presence... no checking for bsd/signal.h... no checking regex.h usability... yes checking regex.h presence... yes checking for regex.h... yes checking regexp.h usability... no checking regexp.h presence... yes configure: WARNING: regexp.h: present but cannot be compiled configure: WARNING: regexp.h: check for missing prerequisite headers? configure: WARNING: regexp.h: see the Autoconf documentation configure: WARNING: regexp.h: section "Present But Cannot Be Compiled" configure: WARNING: regexp.h: proceeding with the preprocessor's result configure: WARNING: regexp.h: in the future, the compiler will take precedence configure: WARNING: ## ------------------------------------------ ## configure: WARNING: ## Report this to the AC_PACKAGE_NAME lists. ## configure: WARNING: ## ------------------------------------------ ## checking for regexp.h... yes checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking X11/X.h usability... yes checking X11/X.h presence... yes checking for X11/X.h... yes checking X11/Xlib.h usability... yes checking X11/Xlib.h presence... yes checking for X11/Xlib.h... yes checking X11/Xmu/Atoms.h usability... yes checking X11/Xmu/Atoms.h presence... yes checking for X11/Xmu/Atoms.h... yes checking X11/Sunkeysym.h usability... yes checking X11/Sunkeysym.h presence... yes checking for X11/Sunkeysym.h... yes checking X11/Xlocale.h usability... yes checking X11/Xlocale.h presence... yes checking for X11/Xlocale.h... yes checking whether time.h and sys/time.h may both be included... yes checking for mode_t... yes checking for off_t... yes checking for pid_t... yes checking for uid_t in sys/types.h... yes checking return type of signal handlers... void checking for atexit... yes checking for _exit... yes checking for unsetenv... yes checking for setutent... yes checking for seteuid... yes checking for memmove... yes checking for putenv... yes checking for strsep... yes checking for setresuid... yes checking for setresgid... yes checking for memmem... yes checking for usleep... yes checking for snprintf... yes checking for strcasestr... yes checking for strcasechr... no checking for strcasepbrk... no checking for strrev... no checking for nl_langinfo... yes checking whether snprintf ignores n... no, snprintf is ok checking for pow in -lm... yes checking for library containing login... -lutil checking for library containing logout... none required checking for library containing getpwuid... none required checking for debugging level... 4 checking for ptsname... yes checking for grantpt... yes checking for unlockpt... yes checking for pty mechanism... SVR4 checking for pty group... none checking for saved uids... yes checking if strict ICCCM compliance should be enabled... no checking for XOpenDisplay in -lX11... yes checking for XextAddDisplay in -lXext... yes checking for XShapeQueryExtension in -lXext... yes checking if Pablo support is wanted... no checking for Escreen support... yes checking for Etwin support... no checking for Escreen startup effects... no checking if profiling macros should be included... no checking for pixmap support... yes checking for dlopen in -ldl... yes checking for TT_Init_FreeType in -lttf... no checking for imlib_create_image in -lImlib2... yes checking for transparency support... yes checking for MMX support... no (no MMX detected) checking for SSE2 support... yes checking for libast-config... libast-config checking for libast_set_program_name in -last... yes checking for utmp support... yes checking for addToUtmp in -lutempter... no checking for backspace key configuration... default checking for delete key configuration... default checking for home key configuration... default checking for end key configuration... default checking if mousewheel support should be enabled... yes checking for automatic encoding... yes checking for multi-charset support... ISO-10646 checking for XIM support... yes checking for XmuInternAtom in -lXmu... yes checking for XRegisterIMInstantiateCallback in -lX11... yes checking for X11/extensions/XRes.h... yes checking for XResQueryExtension in -lXRes... yes checking for Greek keyboard support... no checking for dbx... no checking for gdb... no checking for pstack... no checking for U_STACK_TRACE in -lcl... no checking for Linux 2.1 or higher... yes checking if we should enable name reporting escape sequences... no checking for life_signs in -lKenny... no Oh my god, they killed Kenny! You bastards! configure: creating ./config.status config.status: creating Makefile config.status: creating bg/Makefile config.status: creating doc/Makefile config.status: creating utils/Makefile config.status: creating pix/Makefile config.status: creating src/Makefile config.status: creating themes/Makefile config.status: creating config.h config.status: executing depfiles commands creating utils/kEsetroot creating themes/Eterm/theme.cfg creating themes/auto/theme.cfg creating themes/Escreen/theme.cfg creating themes/trans/theme.cfg Eterm 0.9.5 Configuration: -------------- Source code location: . Host System Type: x86_64-unknown-linux-gnu Preprocessor: gcc -E -I/usr/pkg/include -I/usr/pkg/include/freetype2 -I/usr/pkg/include -I/usr/pkg/include/freetype2 Compiler: gcc -O3 -pipe -fstack-protector -I/usr/pkg/include -I/usr/pkg/include/freetype2 Linker: gcc -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -L/usr/pkg/lib -Wl,-R/usr/pkg/lib -lImlib2 -ldl -L/usr/pkg/lib -lImlib2 -L/usr/pkg/lib -lfreetype -lz -lbz2 -lX11 -lXext -ldl -lm -lSM -lICE -lpcre -lXRes -lSM -lICE -lXmu -last -lXext -lX11 -lutil -lm Install path: /usr/pkg See src/feature.h for further configuration information. Now type 'make' to build Eterm 0.9.5. => Modifying libtool scripts to use pkgsrc libtool WARNING: *** Please consider adding c++ to USE_LANGUAGES in the package Makefile. WARNING: *** Please consider adding fortran to USE_LANGUAGES in the package Makefile.