comms/asterisk13 - The NetBSD Packages Collection

The Asterisk Software PBX

Asterisk is a complete PBX in software.  It provides all of the
features you would expect from a PBX and more. Asterisk does voice
over IP in three protocols, and can interoperate with almost all
standards-based telephony equipment using relatively inexpensive
hardware.

Asterisk provides Voicemail services with Directory, Call Conferencing,
Interactive Voice Response, Call Queuing. It has support for
three-way calling, caller ID services, ADSI, SIP and H.323 (as both
client and gateway).

This is a long term support version.  It is scheduled to go to
security fixes only on 2020-10-24, and EOL on 2021-10-24. For more
information about Asterisk versions, see
https://wiki.asterisk.org/wiki/display/AST/Asterisk+Versions

NOTE:  This version does not work with the zaptel drivers.  It
requires the newer DAHDI drivers which are still being ported.
So, there is no hardware support available at this moment.

Build dependencies

pkgtools/cwrappers devel/bison devel/gmake devel/pkgconf

Runtime dependencies

shells/bash lang/perl5 comms/srtp textproc/iksemel audio/speex audio/speexdsp devel/libuuid textproc/jansson textproc/libxml2 www/curl textproc/jansson textproc/libxml2 www/curl

Binary packages

OSArchitectureVersion
NetBSD 8.0earmv7hfasterisk-13.19.0nb28.tgz
NetBSD 8.0earmv7hfasterisk-13.19.0nb27.tgz
NetBSD 8.0earmv7hfasterisk-13.38.2.tgz
NetBSD 8.0powerpcasterisk-13.19.0nb27.tgz
NetBSD 8.0powerpcasterisk-13.38.2.tgz
NetBSD 8.0powerpcasterisk-13.19.0nb28.tgz
NetBSD 8.0powerpcasterisk-13.38.2.tgz
NetBSD 8.0x86_64asterisk-13.38.2.tgz
NetBSD 8.0x86_64asterisk-13.19.0nb27.tgz
NetBSD 8.0x86_64asterisk-13.19.0nb28.tgz
NetBSD 9.0aarch64asterisk-13.38.2.tgz
NetBSD 9.0aarch64asterisk-13.19.0nb27.tgz
NetBSD 9.0aarch64asterisk-13.19.0nb28.tgz
NetBSD 9.0alphaasterisk-13.38.2.tgz
NetBSD 9.0alphaasterisk-13.19.0nb27.tgz
NetBSD 9.0alphaasterisk-13.19.0nb28.tgz
NetBSD 9.0earmasterisk-13.19.0nb27.tgz
NetBSD 9.0earmv6hfasterisk-13.38.2.tgz
NetBSD 9.0earmv6hfasterisk-13.19.0nb27.tgz
NetBSD 9.0earmv6hfasterisk-13.19.0nb28.tgz
NetBSD 9.0earmv6hfasterisk-13.19.0nb28.tgz
NetBSD 9.0earmv7hfasterisk-13.38.2.tgz
NetBSD 9.0earmv7hfasterisk-13.19.0nb27.tgz
NetBSD 9.0earmv7hfasterisk-13.19.0nb28.tgz
NetBSD 9.0earmv7hfasterisk-13.19.0nb28.tgz
NetBSD 9.0earmv7hfasterisk-13.38.2.tgz
NetBSD 9.0mips64ebasterisk-13.38.2.tgz
NetBSD 9.0mips64ebasterisk-13.19.0nb27.tgz
NetBSD 9.0mips64ebasterisk-13.19.0nb28.tgz
NetBSD 9.0powerpcasterisk-13.19.0nb28.tgz
NetBSD 9.0powerpcasterisk-13.19.0nb27.tgz
NetBSD 9.0powerpcasterisk-13.38.2.tgz
NetBSD 9.0powerpcasterisk-13.38.2.tgz
NetBSD 9.0sparc64asterisk-13.38.2.tgz
NetBSD 9.0sparc64asterisk-13.19.0nb27.tgz
NetBSD 9.0sparc64asterisk-13.19.0nb28.tgz
NetBSD 9.0sparcasterisk-13.38.2.tgz
NetBSD 9.0sparcasterisk-13.19.0nb28.tgz
NetBSD 9.0x86_64asterisk-13.19.0nb28.tgz
NetBSD 9.0x86_64asterisk-13.19.0nb28.tgz
NetBSD 9.0x86_64asterisk-13.38.1nb1.tgz
NetBSD 9.0x86_64asterisk-13.38.2.tgz
NetBSD 9.0x86_64asterisk-13.19.0nb27.tgz
NetBSD 9.0x86_64asterisk-13.19.0nb28.tgz
NetBSD 9.0x86_64asterisk-13.38.2.tgz

Binary packages can be installed with the high-level tool pkgin (which can be installed with pkg_add) or pkg_add(1) (installed by default). The NetBSD packages collection is also designed to permit easy installation from source.

Available build options

asterisk-config
Control installation of Asterisk sample config files.
ilbc
Enable the use of iLBC (Internet Low Bit Rate Codec).
jabber
Enable support for jabber/gtalk.
ldap
Enable LDAP support.
pgsql
Enable PostgreSQL support.
snmp
Enable SNMP support.
spandsp
Enable spandsp support.
speex
Enable speex support.
unixodbc
Enable ODBC support via unixODBC.
webvmail
Install CGI script for voicemail.
x11
Enable X11 support.
zaptel

Known vulnerabilities

The pkg_admin audit command locates any installed package which has been mentioned in security advisories as having vulnerabilities.

Please note the vulnerabilities database might not be fully accurate, and not every bug is exploitable with every configuration.


Problem reports, updates or suggestions for this package should be reported with send-pr.