/* $NetBSD: uftdi.c,v 1.79 2024/04/25 01:33:03 thorpej Exp $ */ /* * Copyright (c) 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (lennart@augustsson.net). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: uftdi.c,v 1.79 2024/04/25 01:33:03 thorpej Exp $"); #ifdef _KERNEL_OPT #include "opt_usb.h" #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef UFTDI_DEBUG #define DPRINTF(x) if (uftdidebug) printf x #define DPRINTFN(n,x) if (uftdidebug>(n)) printf x int uftdidebug = 0; #else #define DPRINTF(x) #define DPRINTFN(n,x) #endif #define UFTDI_CONFIG_NO 1 /* * These are the default number of bytes transferred per frame if the * endpoint doesn't tell us. The output buffer size is a hard limit * for devices that use a 6-bit size encoding. */ #define UFTDIIBUFSIZE 64 #define UFTDIOBUFSIZE 64 /* * Magic constants! Where do these come from? They're what Linux uses... */ #define UFTDI_MAX_IBUFSIZE 512 #define UFTDI_MAX_OBUFSIZE 256 struct uftdi_softc { device_t sc_dev; /* base device */ struct usbd_device * sc_udev; /* device */ struct usbd_interface * sc_iface; /* interface */ int sc_iface_no; enum uftdi_type sc_type; u_int sc_flags; #define FLAGS_BAUDCLK_12M 0x00000001 #define FLAGS_ROUNDOFF_232A 0x00000002 #define FLAGS_BAUDBITS_HINDEX 0x00000004 u_int sc_hdrlen; u_int sc_chiptype; u_char sc_msr; u_char sc_lsr; device_t sc_subdev; bool sc_dying; u_int last_lcr; }; static void uftdi_get_status(void *, int, u_char *, u_char *); static void uftdi_set(void *, int, int, int); static int uftdi_param(void *, int, struct termios *); static int uftdi_open(void *, int); static void uftdi_read(void *, int, u_char **, uint32_t *); static void uftdi_write(void *, int, u_char *, u_char *, uint32_t *); static void uftdi_break(void *, int, int); static const struct ucom_methods uftdi_methods = { .ucom_get_status = uftdi_get_status, .ucom_set = uftdi_set, .ucom_param = uftdi_param, .ucom_open = uftdi_open, .ucom_read = uftdi_read, .ucom_write = uftdi_write, }; /* * The devices default to UFTDI_TYPE_8U232AM. * Remember to update uftdi_attach() if it should be UFTDI_TYPE_SIO instead */ static const struct usb_devno uftdi_devs[] = { { USB_VENDOR_BBELECTRONICS, USB_PRODUCT_BBELECTRONICS_USOTL4 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US101 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US159 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US235 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US257 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US279_12 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US279_34 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US279_56 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US279_78 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US313 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US320 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US324 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US346_12 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US346_34 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US701_12 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US701_34 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US842_12 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US842_34 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US842_56 }, { USB_VENDOR_BRAINBOXES, USB_PRODUCT_BRAINBOXES_US842_78 }, { USB_VENDOR_FALCOM, USB_PRODUCT_FALCOM_TWIST }, { USB_VENDOR_FALCOM, USB_PRODUCT_FALCOM_SAMBA }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_230X }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_232H }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_232RL }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_2232C }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_4232H }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_8U100AX }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SERIAL_8U232AM }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_KW }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_YS }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y6 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y8 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_IC }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_DB9 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_RS232 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MHAM_Y9 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_COASTAL_TNCX }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_CTI_485_MINI }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_CTI_NANO_485 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_SEMC_DSS20 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_LK202_24_USB }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_LK204_24_USB }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_MX200_USB }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_MX4_MX5_USB }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_631 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_632 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_633 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_634 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_LCD_CFA_635 }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_OPENRD_JTAGKEY }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_BEAGLEBONE }, { USB_VENDOR_FTDI, USB_PRODUCT_FTDI_MAXSTREAM_PKG_U }, { USB_VENDOR_xxFTDI, USB_PRODUCT_xxFTDI_SHEEVAPLUG_JTAG }, { USB_VENDOR_INTREPIDCS, USB_PRODUCT_INTREPIDCS_VALUECAN }, { USB_VENDOR_INTREPIDCS, USB_PRODUCT_INTREPIDCS_NEOVI }, { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_PCOPRS1 }, { USB_VENDOR_RATOC, USB_PRODUCT_RATOC_REXUSB60F }, { USB_VENDOR_RTSYS, USB_PRODUCT_RTSYS_CT57A }, { USB_VENDOR_RTSYS, USB_PRODUCT_RTSYS_RTS03 }, { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_USBSERIAL }, { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P1 }, { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P2 }, { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P3 }, { USB_VENDOR_SEALEVEL, USB_PRODUCT_SEALEVEL_SEAPORT4P4 }, { USB_VENDOR_SIIG2, USB_PRODUCT_SIIG2_US2308 }, { USB_VENDOR_MISC, USB_PRODUCT_MISC_TELLSTICK }, { USB_VENDOR_MISC, USB_PRODUCT_MISC_TELLSTICK_DUO }, }; #define uftdi_lookup(v, p) usb_lookup(uftdi_devs, v, p) static int uftdi_match(device_t, cfdata_t, void *); static void uftdi_attach(device_t, device_t, void *); static void uftdi_childdet(device_t, device_t); static int uftdi_detach(device_t, int); CFATTACH_DECL2_NEW(uftdi, sizeof(struct uftdi_softc), uftdi_match, uftdi_attach, uftdi_detach, NULL, NULL, uftdi_childdet); struct uftdi_match_quirk_entry { uint16_t vendor_id; uint16_t product_id; int iface_no; const char * vendor_str; const char * product_str; int match_ret; }; static const struct uftdi_match_quirk_entry uftdi_match_quirks[] = { /* * The Tigard board (https://github.com/tigard-tools/tigard) * has two interfaces, one of which is meant to act as a * regular USB serial port (interface 0), the other of which * is meant for other protocols (SWD, JTAG, etc.). We must * reject interface 1 so that ugenif matches, thus allowing * full user-space control of that port. */ { .vendor_id = USB_VENDOR_FTDI, .product_id = USB_PRODUCT_FTDI_SERIAL_2232C, .iface_no = 1, .vendor_str = "SecuringHardware.com", .product_str = "Tigard V1.1", .match_ret = UMATCH_NONE, }, /* * The SiPEED Tang Nano 9K (and other SiPEED Tang FPGA development * boards) have an FT2232 on-board, wired up only for JTAG. */ { .vendor_id = USB_VENDOR_FTDI, .product_id = USB_PRODUCT_FTDI_SERIAL_2232C, .iface_no = -1, .vendor_str = "SIPEED", .product_str = "JTAG Debugger", .match_ret = UMATCH_NONE, }, }; static int uftdi_quirk_match(struct usbif_attach_arg *uiaa, int rv) { struct usbd_device *dev = uiaa->uiaa_device; const struct uftdi_match_quirk_entry *q; int i; for (i = 0; i < __arraycount(uftdi_match_quirks); i++) { q = &uftdi_match_quirks[i]; if (uiaa->uiaa_vendor != q->vendor_id || uiaa->uiaa_product != q->product_id || (q->iface_no != -1 && uiaa->uiaa_ifaceno != q->iface_no)) { continue; } if (q->vendor_str != NULL && (dev->ud_vendor == NULL || strcmp(dev->ud_vendor, q->vendor_str) != 0)) { continue; } if (q->product_str != NULL && (dev->ud_product == NULL || strcmp(dev->ud_product, q->product_str) != 0)) { continue; } /* * Got a match! */ rv = q->match_ret; break; } return rv; } static int uftdi_match(device_t parent, cfdata_t match, void *aux) { struct usbif_attach_arg *uiaa = aux; int rv; DPRINTFN(20,("uftdi: vendor=%#x, product=%#x\n", uiaa->uiaa_vendor, uiaa->uiaa_product)); if (uiaa->uiaa_configno != UFTDI_CONFIG_NO) return UMATCH_NONE; rv = uftdi_lookup(uiaa->uiaa_vendor, uiaa->uiaa_product) != NULL ? UMATCH_VENDOR_PRODUCT_CONF_IFACE : UMATCH_NONE; if (rv != UMATCH_NONE) { rv = uftdi_quirk_match(uiaa, rv); } return rv; } static void uftdi_attach(device_t parent, device_t self, void *aux) { struct uftdi_softc *sc = device_private(self); struct usbif_attach_arg *uiaa = aux; struct usbd_device *dev = uiaa->uiaa_device; struct usbd_interface *iface = uiaa->uiaa_iface; usb_device_descriptor_t *ddesc; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; char *devinfop; int i; struct ucom_attach_args ucaa; DPRINTFN(10,("\nuftdi_attach: sc=%p\n", sc)); aprint_naive("\n"); aprint_normal("\n"); devinfop = usbd_devinfo_alloc(dev, 0); aprint_normal_dev(self, "%s\n", devinfop); usbd_devinfo_free(devinfop); sc->sc_dev = self; sc->sc_udev = dev; sc->sc_dying = false; sc->sc_iface_no = uiaa->uiaa_ifaceno; sc->sc_type = UFTDI_TYPE_8U232AM; /* most devices are post-8U232AM */ sc->sc_hdrlen = 0; ddesc = usbd_get_device_descriptor(dev); sc->sc_chiptype = UGETW(ddesc->bcdDevice); switch (sc->sc_chiptype) { case 0x0200: if (ddesc->iSerialNumber != 0) sc->sc_flags |= FLAGS_ROUNDOFF_232A; ucaa.ucaa_portno = 0; break; case 0x0400: ucaa.ucaa_portno = 0; break; case 0x0500: sc->sc_flags |= FLAGS_BAUDBITS_HINDEX; ucaa.ucaa_portno = FTDI_PIT_SIOA + sc->sc_iface_no; break; case 0x0600: ucaa.ucaa_portno = 0; break; case 0x0700: case 0x0800: case 0x0900: sc->sc_flags |= FLAGS_BAUDCLK_12M; sc->sc_flags |= FLAGS_BAUDBITS_HINDEX; ucaa.ucaa_portno = FTDI_PIT_SIOA + sc->sc_iface_no; break; case 0x1000: sc->sc_flags |= FLAGS_BAUDBITS_HINDEX; ucaa.ucaa_portno = FTDI_PIT_SIOA + sc->sc_iface_no; break; default: if (sc->sc_chiptype < 0x0200) { sc->sc_type = UFTDI_TYPE_SIO; sc->sc_hdrlen = 1; } ucaa.ucaa_portno = 0; break; } id = usbd_get_interface_descriptor(iface); sc->sc_iface = iface; ucaa.ucaa_bulkin = ucaa.ucaa_bulkout = -1; ucaa.ucaa_ibufsize = ucaa.ucaa_obufsize = 0; for (i = 0; i < id->bNumEndpoints; i++) { int addr, dir, attr; ed = usbd_interface2endpoint_descriptor(iface, i); if (ed == NULL) { aprint_error_dev(self, "could not read endpoint descriptor\n"); goto bad; } addr = ed->bEndpointAddress; dir = UE_GET_DIR(ed->bEndpointAddress); attr = ed->bmAttributes & UE_XFERTYPE; if (dir == UE_DIR_IN && attr == UE_BULK) { ucaa.ucaa_bulkin = addr; ucaa.ucaa_ibufsize = UGETW(ed->wMaxPacketSize); if (ucaa.ucaa_ibufsize >= UFTDI_MAX_IBUFSIZE) ucaa.ucaa_ibufsize = UFTDI_MAX_IBUFSIZE; } else if (dir == UE_DIR_OUT && attr == UE_BULK) { ucaa.ucaa_bulkout = addr; ucaa.ucaa_obufsize = UGETW(ed->wMaxPacketSize) - sc->sc_hdrlen; if (ucaa.ucaa_obufsize >= UFTDI_MAX_OBUFSIZE) ucaa.ucaa_obufsize = UFTDI_MAX_OBUFSIZE; /* Limit length if we have a 6-bit header. */ if ((sc->sc_hdrlen > 0) && (ucaa.ucaa_obufsize > UFTDIOBUFSIZE)) ucaa.ucaa_obufsize = UFTDIOBUFSIZE; } else { aprint_error_dev(self, "unexpected endpoint\n"); goto bad; } } if (ucaa.ucaa_bulkin == -1) { aprint_error_dev(self, "Could not find data bulk in\n"); goto bad; } if (ucaa.ucaa_bulkout == -1) { aprint_error_dev(self, "Could not find data bulk out\n"); goto bad; } /* ucaa_bulkin, ucaa_bulkout set above */ if (ucaa.ucaa_ibufsize == 0) ucaa.ucaa_ibufsize = UFTDIIBUFSIZE; ucaa.ucaa_ibufsizepad = ucaa.ucaa_ibufsize; if (ucaa.ucaa_obufsize == 0) ucaa.ucaa_obufsize = UFTDIOBUFSIZE - sc->sc_hdrlen; ucaa.ucaa_opkthdrlen = sc->sc_hdrlen; ucaa.ucaa_device = dev; ucaa.ucaa_iface = iface; ucaa.ucaa_methods = &uftdi_methods; ucaa.ucaa_arg = sc; ucaa.ucaa_info = NULL; DPRINTF(("uftdi: in=%#x out=%#x isize=%#x osize=%#x\n", ucaa.ucaa_bulkin, ucaa.ucaa_bulkout, ucaa.ucaa_ibufsize, ucaa.ucaa_obufsize)); sc->sc_subdev = config_found(self, &ucaa, ucomprint, CFARGS(.submatch = ucomsubmatch)); usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev, sc->sc_dev); if (!pmf_device_register(self, NULL, NULL)) aprint_error_dev(self, "couldn't establish power handler\n"); return; bad: DPRINTF(("uftdi_attach: ATTACH ERROR\n")); sc->sc_dying = true; return; } static void uftdi_childdet(device_t self, device_t child) { struct uftdi_softc *sc = device_private(self); KASSERT(child == sc->sc_subdev); sc->sc_subdev = NULL; } static int uftdi_detach(device_t self, int flags) { struct uftdi_softc *sc = device_private(self); int rv = 0; DPRINTF(("uftdi_detach: sc=%p flags=%d\n", sc, flags)); sc->sc_dying = true; if (sc->sc_subdev != NULL) { rv = config_detach(sc->sc_subdev, flags); sc->sc_subdev = NULL; } usbd_add_drv_event(USB_EVENT_DRIVER_DETACH, sc->sc_udev, sc->sc_dev); return rv; } static int uftdi_open(void *vsc, int portno) { struct uftdi_softc *sc = vsc; usb_device_request_t req; usbd_status err; struct termios t; DPRINTF(("uftdi_open: sc=%p\n", sc)); if (sc->sc_dying) return EIO; /* Perform a full reset on the device */ req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_RESET; USETW(req.wValue, FTDI_SIO_RESET_SIO); USETW(req.wIndex, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; /* Set 9600 baud, 2 stop bits, no parity, 8 bits */ t.c_ospeed = 9600; t.c_cflag = CSTOPB | CS8; (void)uftdi_param(sc, portno, &t); /* Turn on RTS/CTS flow control */ req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_FLOW_CTRL; USETW(req.wValue, 0); USETW2(req.wIndex, FTDI_SIO_RTS_CTS_HS, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; return 0; } static void uftdi_read(void *vsc, int portno, u_char **ptr, uint32_t *count) { struct uftdi_softc *sc = vsc; u_char msr, lsr; DPRINTFN(15,("uftdi_read: sc=%p, port=%d count=%d\n", sc, portno, *count)); msr = FTDI_GET_MSR(*ptr); lsr = FTDI_GET_LSR(*ptr); #ifdef UFTDI_DEBUG if (*count != 2) DPRINTFN(10,("uftdi_read: sc=%p, port=%d count=%d data[0]=" "0x%02x\n", sc, portno, *count, (*ptr)[2])); #endif if (sc->sc_msr != msr || (sc->sc_lsr & FTDI_LSR_MASK) != (lsr & FTDI_LSR_MASK)) { DPRINTF(("uftdi_read: status change msr=0x%02x(0x%02x) " "lsr=0x%02x(0x%02x)\n", msr, sc->sc_msr, lsr, sc->sc_lsr)); sc->sc_msr = msr; sc->sc_lsr = lsr; ucom_status_change(device_private(sc->sc_subdev)); } /* Adjust buffer pointer to skip status prefix */ *ptr += 2; } static void uftdi_write(void *vsc, int portno, u_char *to, u_char *from, uint32_t *count) { struct uftdi_softc *sc = vsc; DPRINTFN(10,("uftdi_write: sc=%p, port=%d count=%u data[0]=0x%02x\n", vsc, portno, *count, from[0])); /* Make length tag and copy data */ if (sc->sc_hdrlen > 0) *to = FTDI_OUT_TAG(*count, portno); memcpy(to + sc->sc_hdrlen, from, *count); *count += sc->sc_hdrlen; } static void uftdi_set(void *vsc, int portno, int reg, int onoff) { struct uftdi_softc *sc = vsc; usb_device_request_t req; int ctl; DPRINTF(("uftdi_set: sc=%p, port=%d reg=%d onoff=%d\n", vsc, portno, reg, onoff)); if (sc->sc_dying) return; switch (reg) { case UCOM_SET_DTR: ctl = onoff ? FTDI_SIO_SET_DTR_HIGH : FTDI_SIO_SET_DTR_LOW; break; case UCOM_SET_RTS: ctl = onoff ? FTDI_SIO_SET_RTS_HIGH : FTDI_SIO_SET_RTS_LOW; break; case UCOM_SET_BREAK: uftdi_break(sc, portno, onoff); return; default: return; } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_MODEM_CTRL; USETW(req.wValue, ctl); USETW(req.wIndex, portno); USETW(req.wLength, 0); DPRINTFN(2,("uftdi_set: reqtype=0x%02x req=0x%02x value=0x%04x " "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); (void)usbd_do_request(sc->sc_udev, &req, NULL); } /* * Return true if the given speed is within operational tolerance of the target * speed. FTDI recommends that the hardware speed be within 3% of nominal. */ static inline bool uftdi_baud_within_tolerance(uint64_t speed, uint64_t target) { return ((speed >= (target * 100) / 103) && (speed <= (target * 100) / 97)); } static int uftdi_encode_baudrate(struct uftdi_softc *sc, int speed, int *rate, int *ratehi) { static const uint8_t encoded_fraction[8] = { 0, 3, 2, 4, 1, 5, 6, 7 }; static const uint8_t roundoff_232a[16] = { 0, 1, 0, 1, 0, -1, 2, 1, 0, -1, -2, -3, 4, 3, 2, 1, }; uint32_t clk, divisor, fastclk_flag, frac, hwspeed; /* * If this chip has the fast clock capability and the speed is within * range, use the 12MHz clock, otherwise the standard clock is 3MHz. */ if ((sc->sc_flags & FLAGS_BAUDCLK_12M) && speed >= 1200) { clk = 12000000; fastclk_flag = (1 << 17); } else { clk = 3000000; fastclk_flag = 0; } /* * Make sure the requested speed is reachable with the available clock * and a 14-bit divisor. */ if (speed < (clk >> 14) || speed > clk) return -1; /* * Calculate the divisor, initially yielding a fixed point number with a * 4-bit (1/16ths) fraction, then round it to the nearest fraction the * hardware can handle. When the integral part of the divisor is * greater than one, the fractional part is in 1/8ths of the base clock. * The FT8U232AM chips can handle only 0.125, 0.250, and 0.5 fractions. * Later chips can handle all 1/8th fractions. * * If the integral part of the divisor is 1, a special rule applies: the * fractional part can only be .0 or .5 (this is a limitation of the * hardware). We handle this by truncating the fraction rather than * rounding, because this only applies to the two fastest speeds the * chip can achieve and rounding doesn't matter, either you've asked for * that exact speed or you've asked for something the chip can't do. * * For the FT8U232AM chips, use a roundoff table to adjust the result * to the nearest 1/8th fraction that is supported by the hardware, * leaving a fixed-point number with a 3-bit fraction which exactly * represents the math the hardware divider will do. For later-series * chips that support all 8 fractional divisors, just round 16ths to * 8ths by adding 1 and dividing by 2. */ divisor = (clk << 4) / speed; if ((divisor & 0xf) == 1) divisor &= 0xfffffff8; else if (sc->sc_flags & FLAGS_ROUNDOFF_232A) divisor += roundoff_232a[divisor & 0x0f]; else divisor += 1; /* Rounds odd 16ths up to next 8th. */ divisor >>= 1; /* * Ensure the resulting hardware speed will be within operational * tolerance (within 3% of nominal). */ hwspeed = (clk << 3) / divisor; if (!uftdi_baud_within_tolerance(hwspeed, speed)) return -1; /* * Re-pack the divisor into hardware format. The lower 14-bits hold the * integral part, while the upper bits specify the fraction by indexing * a table of fractions within the hardware which is laid out as: * {0.0, 0.5, 0.25, 0.125, 0.325, 0.625, 0.725, 0.875} * The A-series chips only have the first four table entries; the * roundoff table logic above ensures that the fractional part for those * chips will be one of the first four values. * * When the divisor is 1 a special encoding applies: 1.0 is encoded as * 0.0, and 1.5 is encoded as 1.0. The rounding logic above has already * ensured that the fraction is either .0 or .5 if the integral is 1. */ frac = divisor & 0x07; divisor >>= 3; if (divisor == 1) { if (frac == 0) divisor = 0; /* 1.0 becomes 0.0 */ else frac = 0; /* 1.5 becomes 1.0 */ } divisor |= (encoded_fraction[frac] << 14) | fastclk_flag; *rate = (uint16_t)divisor; *ratehi = (uint16_t)(divisor >> 16); /* * If this chip requires the baud bits to be in the high byte of the * index word, move the bits up to that location. */ if (sc->sc_flags & FLAGS_BAUDBITS_HINDEX) *ratehi <<= 8; return 0; } static int uftdi_param(void *vsc, int portno, struct termios *t) { struct uftdi_softc *sc = vsc; usb_device_request_t req; usbd_status err; int rate, ratehi, rerr, data, flow; DPRINTF(("uftdi_param: sc=%p\n", sc)); if (sc->sc_dying) return EIO; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_BITMODE; USETW(req.wValue, FTDI_BITMODE_RESET << 8 | 0x00); USETW(req.wIndex, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; switch (sc->sc_type) { case UFTDI_TYPE_SIO: switch (t->c_ospeed) { case 300: rate = ftdi_sio_b300; break; case 600: rate = ftdi_sio_b600; break; case 1200: rate = ftdi_sio_b1200; break; case 2400: rate = ftdi_sio_b2400; break; case 4800: rate = ftdi_sio_b4800; break; case 9600: rate = ftdi_sio_b9600; break; case 19200: rate = ftdi_sio_b19200; break; case 38400: rate = ftdi_sio_b38400; break; case 57600: rate = ftdi_sio_b57600; break; case 115200: rate = ftdi_sio_b115200; break; default: return EINVAL; } ratehi = 0; break; case UFTDI_TYPE_8U232AM: rerr = uftdi_encode_baudrate(sc, t->c_ospeed, &rate, &ratehi); if (rerr != 0) return EINVAL; break; default: return EINVAL; } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_BAUD_RATE; USETW(req.wValue, rate); USETW(req.wIndex, portno | ratehi); USETW(req.wLength, 0); DPRINTFN(2,("uftdi_param: reqtype=0x%02x req=0x%02x value=0x%04x " "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; if (ISSET(t->c_cflag, CSTOPB)) data = FTDI_SIO_SET_DATA_STOP_BITS_2; else data = FTDI_SIO_SET_DATA_STOP_BITS_1; if (ISSET(t->c_cflag, PARENB)) { if (ISSET(t->c_cflag, PARODD)) data |= FTDI_SIO_SET_DATA_PARITY_ODD; else data |= FTDI_SIO_SET_DATA_PARITY_EVEN; } else data |= FTDI_SIO_SET_DATA_PARITY_NONE; switch (ISSET(t->c_cflag, CSIZE)) { case CS5: data |= FTDI_SIO_SET_DATA_BITS(5); break; case CS6: data |= FTDI_SIO_SET_DATA_BITS(6); break; case CS7: data |= FTDI_SIO_SET_DATA_BITS(7); break; case CS8: data |= FTDI_SIO_SET_DATA_BITS(8); break; } sc->last_lcr = data; req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_DATA; USETW(req.wValue, data); USETW(req.wIndex, portno); USETW(req.wLength, 0); DPRINTFN(2,("uftdi_param: reqtype=0x%02x req=0x%02x value=0x%04x " "index=0x%04x len=%d\n", req.bmRequestType, req.bRequest, UGETW(req.wValue), UGETW(req.wIndex), UGETW(req.wLength))); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; if (ISSET(t->c_cflag, CRTSCTS)) { flow = FTDI_SIO_RTS_CTS_HS; USETW(req.wValue, 0); } else if (ISSET(t->c_iflag, IXON) && ISSET(t->c_iflag, IXOFF)) { flow = FTDI_SIO_XON_XOFF_HS; USETW2(req.wValue, t->c_cc[VSTOP], t->c_cc[VSTART]); } else { flow = FTDI_SIO_DISABLE_FLOW_CTRL; USETW(req.wValue, 0); } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_FLOW_CTRL; USETW2(req.wIndex, flow, portno); USETW(req.wLength, 0); err = usbd_do_request(sc->sc_udev, &req, NULL); if (err) return EIO; return 0; } static void uftdi_get_status(void *vsc, int portno, u_char *lsr, u_char *msr) { struct uftdi_softc *sc = vsc; DPRINTF(("uftdi_status: msr=0x%02x lsr=0x%02x\n", sc->sc_msr, sc->sc_lsr)); if (sc->sc_dying) return; *msr = sc->sc_msr; *lsr = sc->sc_lsr; } static void uftdi_break(void *vsc, int portno, int onoff) { struct uftdi_softc *sc = vsc; usb_device_request_t req; int data; DPRINTF(("uftdi_break: sc=%p, port=%d onoff=%d\n", vsc, portno, onoff)); if (onoff) { data = sc->last_lcr | FTDI_SIO_SET_BREAK; } else { data = sc->last_lcr; } req.bmRequestType = UT_WRITE_VENDOR_DEVICE; req.bRequest = FTDI_SIO_SET_DATA; USETW(req.wValue, data); USETW(req.wIndex, portno); USETW(req.wLength, 0); (void)usbd_do_request(sc->sc_udev, &req, NULL); }