/* $NetBSD: bwtwo.c,v 1.39 2022/09/25 21:30:29 thorpej Exp $ */ /*- * Copyright (c) 1996, 1997 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)bwtwo.c 8.1 (Berkeley) 6/11/93 */ /* * black & white display (bwtwo) driver. * * Does not handle interrupts, even though they can occur. * * P4 and overlay plane support by Jason R. Thorpe . * Overlay plane handling hints and ideas provided by Brad Spencer. */ #include __KERNEL_RCSID(0, "$NetBSD: bwtwo.c,v 1.39 2022/09/25 21:30:29 thorpej Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if NWSDISPLAY > 0 #include #include #include #include "opt_wsemul.h" #endif #include "ioconf.h" dev_type_open(bwtwoopen); dev_type_ioctl(bwtwoioctl); dev_type_mmap(bwtwommap); const struct cdevsw bwtwo_cdevsw = { .d_open = bwtwoopen, .d_close = nullclose, .d_read = noread, .d_write = nowrite, .d_ioctl = bwtwoioctl, .d_stop = nostop, .d_tty = notty, .d_poll = nopoll, .d_mmap = bwtwommap, .d_kqfilter = nokqfilter, .d_discard = nodiscard, .d_flag = D_OTHER }; /* XXX we do not handle frame buffer interrupts (do not know how) */ static void bwtwounblank(device_t); /* frame buffer generic driver */ static struct fbdriver bwtwofbdriver = { bwtwounblank, bwtwoopen, nullclose, bwtwoioctl, nopoll, bwtwommap, nokqfilter }; #if NWSDISPLAY > 0 #ifdef RASTERCONSOLE #error RASTERCONSOLE and wsdisplay are mutually exclusive #endif struct wsscreen_descr bwtwo_defaultscreen = { "std", 0, 0, /* will be filled in -- XXX shouldn't, it's global */ NULL, /* textops */ 8, 16, /* font width/height */ 0, /* capabilities */ NULL /* modecookie */ }; static int bwtwo_ioctl(void *, void *, u_long, void *, int, struct lwp *); static paddr_t bwtwo_mmap(void *, void *, off_t, int); static void bwtwo_init_screen(void *, struct vcons_screen *, int, long *); struct wsdisplay_accessops bwtwo_accessops = { bwtwo_ioctl, bwtwo_mmap, NULL, /* alloc_screen */ NULL, /* free_screen */ NULL, /* show_screen */ NULL, /* load_font */ NULL, /* pollc */ NULL /* scroll */ }; const struct wsscreen_descr *_bwtwo_scrlist[] = { &bwtwo_defaultscreen }; struct wsscreen_list bwtwo_screenlist = { sizeof(_bwtwo_scrlist) / sizeof(struct wsscreen_descr *), _bwtwo_scrlist }; static struct vcons_screen bw2_console_screen; #endif /* NWSDISPLAY > 0 */ int bwtwo_pfour_probe(void *vaddr, void *arg) { cfdata_t cf = arg; switch (fb_pfour_id(vaddr)) { case PFOUR_ID_BW: case PFOUR_ID_COLOR8P1: /* bwtwo in ... */ case PFOUR_ID_COLOR24: /* ...overlay plane */ /* This is wrong; should be done in bwtwo_attach() */ cf->cf_flags |= FB_PFOUR; /* FALLTHROUGH */ case PFOUR_NOTPFOUR: return (1); } return (0); } void bwtwoattach(struct bwtwo_softc *sc, const char *name, int isconsole) { struct fbdevice *fb = &sc->sc_fb; int isoverlay; #if NWSDISPLAY > 0 struct wsemuldisplaydev_attach_args aa; struct rasops_info *ri = &bw2_console_screen.scr_ri; unsigned long defattr = 0; #endif /* Fill in the remaining fbdevice values */ fb->fb_driver = &bwtwofbdriver; fb->fb_device = sc->sc_dev; fb->fb_type.fb_type = FBTYPE_SUN2BW; fb->fb_type.fb_cmsize = 0; fb->fb_type.fb_size = fb->fb_type.fb_height * fb->fb_linebytes; printf(": %s, %d x %d", name, fb->fb_type.fb_width, fb->fb_type.fb_height); /* Are we an overlay bw2? */ if ((fb->fb_flags & FB_PFOUR) == 0 || (sc->sc_ovtype == BWO_NONE)) isoverlay = 0; else isoverlay = 1; /* Insure video is enabled */ sc->sc_set_video(sc, 1); if (isconsole) { printf(" (console)\n"); #ifdef RASTERCONSOLE /* * XXX rcons doesn't seem to work properly on the overlay * XXX plane. This is a temporary kludge until someone * XXX fixes it. */ if (!isoverlay) fbrcons_init(fb); #endif } else printf("\n"); if (isoverlay) { const char *ovnam; switch (sc->sc_ovtype) { case BWO_CGFOUR: ovnam = "cgfour"; break; case BWO_CGEIGHT: ovnam = "cgeight"; break; default: ovnam = "unknown"; break; } printf("%s: %s overlay plane\n", device_xname(sc->sc_dev), ovnam); } /* * If we're on an overlay plane of a color framebuffer, * then we don't force the issue in fb_attach() because * we'd like the color framebuffer to actually be the * "console framebuffer". We're only around to speed * up rconsole. */ if (isoverlay) fb_attach(fb, 0); else fb_attach(fb, isconsole); #if NWSDISPLAY > 0 sc->sc_width = fb->fb_type.fb_width; sc->sc_stride = fb->fb_type.fb_width/8; sc->sc_height = fb->fb_type.fb_height; /* setup rasops and so on for wsdisplay */ sc->sc_mode = WSDISPLAYIO_MODE_EMUL; vcons_init(&sc->vd, sc, &bwtwo_defaultscreen, &bwtwo_accessops); sc->vd.init_screen = bwtwo_init_screen; if(isconsole && !isoverlay) { /* we mess with bw2_console_screen only once */ vcons_init_screen(&sc->vd, &bw2_console_screen, 1, &defattr); bw2_console_screen.scr_flags |= VCONS_SCREEN_IS_STATIC; bwtwo_defaultscreen.textops = &ri->ri_ops; bwtwo_defaultscreen.capabilities = ri->ri_caps; bwtwo_defaultscreen.nrows = ri->ri_rows; bwtwo_defaultscreen.ncols = ri->ri_cols; sc->vd.active = &bw2_console_screen; wsdisplay_cnattach(&bwtwo_defaultscreen, ri, 0, 0, defattr); } else { /* * we're not the console so we just clear the screen and don't * set up any sort of text display */ if (bwtwo_defaultscreen.textops == NULL) { /* * ugly, but... * we want the console settings to win, so we only * touch anything when we find an untouched screen * definition. In this case we fill it from fb to * avoid problems in case no bwtwo is the console */ bwtwo_defaultscreen.textops = &ri->ri_ops; bwtwo_defaultscreen.capabilities = ri->ri_caps; bwtwo_defaultscreen.nrows = ri->ri_rows; bwtwo_defaultscreen.ncols = ri->ri_cols; } } aa.scrdata = &bwtwo_screenlist; if (isoverlay) aa.console = 0; else aa.console = isconsole; aa.accessops = &bwtwo_accessops; aa.accesscookie = &sc->vd; config_found(sc->sc_dev, &aa, wsemuldisplaydevprint, CFARGS_NONE); #endif } int bwtwoopen(dev_t dev, int flags, int mode, struct lwp *l) { int unit = minor(dev); if (device_lookup(&bwtwo_cd, unit) == NULL) return (ENXIO); return (0); } int bwtwoioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l) { struct bwtwo_softc *sc = device_lookup_private(&bwtwo_cd, minor(dev)); switch (cmd) { case FBIOGTYPE: *(struct fbtype *)data = sc->sc_fb.fb_type; break; case FBIOGVIDEO: *(int *)data = sc->sc_get_video(sc); break; case FBIOSVIDEO: sc->sc_set_video(sc, (*(int *)data)); break; default: return (ENOTTY); } return (0); } static void bwtwounblank(device_t dev) { struct bwtwo_softc *sc = device_private(dev); sc->sc_set_video(sc, 1); } /* * Return the address that would map the given device at the given * offset, allowing for the given protection, or return -1 for error. */ paddr_t bwtwommap(dev_t dev, off_t off, int prot) { struct bwtwo_softc *sc = device_lookup_private(&bwtwo_cd, minor(dev)); if (off & PGOFSET) panic("bwtwommap"); if (off >= sc->sc_fb.fb_type.fb_size) return (-1); return (bus_space_mmap(sc->sc_bustag, sc->sc_paddr, sc->sc_pixeloffset + off, prot, BUS_SPACE_MAP_LINEAR)); } #if NWSDISPLAY > 0 int bwtwo_ioctl(void *v, void *vs, u_long cmd, void *data, int flag, struct lwp *l) { /* we'll probably need to add more stuff here */ struct vcons_data *vd = v; struct bwtwo_softc *sc = vd->cookie; struct wsdisplay_fbinfo *wdf; struct vcons_screen *ms = sc->vd.active; struct rasops_info *ri = &ms->scr_ri; switch (cmd) { case WSDISPLAYIO_GTYPE: *(u_int *)data = WSDISPLAY_TYPE_GENFB; return 0; case WSDISPLAYIO_GINFO: wdf = (void *)data; wdf->height = ri->ri_height; wdf->width = ri->ri_width; wdf->depth = ri->ri_depth; wdf->cmsize = 0; return 0; case WSDISPLAYIO_GETCMAP: return EINVAL; case WSDISPLAYIO_PUTCMAP: return EINVAL; case WSDISPLAYIO_SMODE: { int new_mode = *(int*)data; if (new_mode != sc->sc_mode) { sc->sc_mode = new_mode; if(new_mode == WSDISPLAYIO_MODE_EMUL) { vcons_redraw_screen(ms); } } } return 0; case WSDISPLAYIO_GET_FBINFO: { struct wsdisplayio_fbinfo *fbi = data; return wsdisplayio_get_fbinfo(&ms->scr_ri, fbi); } } return EPASSTHROUGH; } paddr_t bwtwo_mmap(void *v, void *vs, off_t offset, int prot) { struct vcons_data *vd = v; struct bwtwo_softc *sc = vd->cookie; if (offset < 0) return -1; if (offset >= sc->sc_fb.fb_type.fb_size) return -1; return bus_space_mmap(sc->sc_bustag, sc->sc_paddr, sc->sc_pixeloffset + offset, prot, BUS_SPACE_MAP_LINEAR); } void bwtwo_init_screen(void *cookie, struct vcons_screen *scr, int existing, long *defattr) { struct bwtwo_softc *sc = cookie; struct rasops_info *ri = &scr->scr_ri; char *bits; ri->ri_depth = 1; ri->ri_width = sc->sc_width; ri->ri_height = sc->sc_height; ri->ri_stride = sc->sc_stride; ri->ri_flg = RI_CENTER; ri->ri_bits = sc->sc_fb.fb_pixels; /* * Make sure that we set a maximum of 32 bits at a time, * otherwise we'll see VME write errors if this is a P4 BW2. */ for (bits = (char *) ri->ri_bits; bits < (char *) ri->ri_bits + ri->ri_stride * ri->ri_height; bits += 4) memset(bits, (*defattr >> 16) & 0xff, 4); rasops_init(ri, 0, 0); ri->ri_caps = 0; rasops_reconfig(ri, sc->sc_height / ri->ri_font->fontheight, sc->sc_width / ri->ri_font->fontwidth); ri->ri_hw = scr; } #endif /* NWSDISPLAY > 0 */