/* $NetBSD: midivar.h,v 1.20 2014/12/22 07:02:22 mrg Exp $ */ /* * Copyright (c) 1998, 2008 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Lennart Augustsson (augustss@NetBSD.org) and (midi FST refactoring and * Active Sense) Chapman Flack (chap@NetBSD.org). * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SYS_DEV_MIDIVAR_H_ #define _SYS_DEV_MIDIVAR_H_ #define MIDI_BUFSIZE 1024 #include #include #include #include #include /* * In both xmt and rcv direction, the midi_fst runs at the time data are * buffered (midi_writebytes for xmt, midi_in for rcv) so what's in the * buffer is always in canonical form (or compressed, on xmt, if the hw * wants it that way). To preserve message boundaries for the buffer * consumer, but allow transfers larger than one message, the buffer is * split into a buf fork and an idx fork, where each byte of idx encodes * the type and length of a message. Because messages are variable length, * it is a guess how to set the relative sizes of idx and buf, or how many * messages can be buffered before one or the other fills. * * The producer adds only complete messages to a buffer (except for SysEx * messages, which have unpredictable length). A consumer serving byte-at-a- * time hardware may partially consume a message, in which case it updates * the length count at *idx_consumerp to reflect the remaining length of the * message, only incrementing idx_consumerp when the message has been entirely * consumed. * * The buffers are structured in the simple 1 reader 1 writer bounded buffer * form, considered full when 1 unused byte remains. This should allow their * use with minimal locking provided single pointer reads and writes can be * assured atomic ... but then I chickened out on assuming that assurance, and * added the extra locks to the code. * * Macros for manipulating the buffers: * * MIDI_BUF_DECLARE(frk) where frk is either buf or idx: * declares the local variables frk_cur, frk_lim, frk_org, and frk_end. * * MIDI_BUF_CONSUMER_INIT(mb,frk) * MIDI_BUF_PRODUCER_INIT(mb,frk) * initializes frk_org and frk_end to the base and end (that is, address just * past the last valid byte) of the buffer fork frk, frk_cur to the * consumer's or producer's current position, respectively, and frk_lim to * the current limit (for either consumer or producer, immediately following * this macro, frk_lim-frk_cur gives the number of bytes to play with). That * means frk_lim may actually point past the buffer; loops on the condition * (frk_cur < frk_lim) must contain WRAP(frk) if proceeding byte-by-byte, or * must explicitly handle wrapping around frk_end if doing anything clever. * These are expression-shaped macros that have the value frk_lim. When used * without locking--provided pointer reads and writes can be assumed atomic-- * these macros give a conservative estimate of what is available to consume * or produce. * * MIDI_BUF_WRAP(frk) * tests whether frk_cur == frk_end and, if so, wraps both frk_cur and * frk_lim around the beginning of the buffer. Because the test is ==, it * must be applied at each byte in a loop; if the loop is proceeding in * bigger steps, the possibility of wrap must be coded for. This expression- * shaped macro has the value of frk_cur after wrapping. * * MIDI_BUF_CONSUMER_REFRESH(mb,frk) * MIDI_BUF_PRODUCER_REFRESH(mb,frk) * refresh the local value frk_lim for a new snapshot of bytes available; an * expression-shaped macro with the new value of frk_lim. Usually used after * using up the first conservative estimate and obtaining a lock to get a * final value. Used unlocked, just gives a more recent conservative estimate. * * MIDI_BUF_CONSUMER_WBACK(mb,frk) * MIDI_BUF_PRODUCER_WBACK(mb,frk) * write back the local copy of frk_cur to the buffer, after a barrier to * ensure prior writes go first. Under the right atomicity conditions a * producer could get away with using these unlocked, as long as the order * is buf followed by idx. A consumer should update both in a critical * section. */ struct midi_buffer { u_char * __volatile idx_producerp; u_char * __volatile idx_consumerp; u_char * __volatile buf_producerp; u_char * __volatile buf_consumerp; u_char idx[MIDI_BUFSIZE/3]; u_char buf[MIDI_BUFSIZE-MIDI_BUFSIZE/3]; }; #define MIDI_BUF_DECLARE(frk) \ u_char *__CONCAT(frk,_cur); \ u_char *__CONCAT(frk,_lim); \ u_char *__CONCAT(frk,_org); \ u_char *__CONCAT(frk,_end) #define MIDI_BUF_CONSUMER_REFRESH(mb,frk) \ ((__CONCAT(frk,_lim)=(mb)->__CONCAT(frk,_producerp)), \ __CONCAT(frk,_lim) < __CONCAT(frk,_cur) ? \ (__CONCAT(frk,_lim) += sizeof (mb)->frk) : __CONCAT(frk,_lim)) #define MIDI_BUF_PRODUCER_REFRESH(mb,frk) \ ((__CONCAT(frk,_lim)=(mb)->__CONCAT(frk,_consumerp)-1), \ __CONCAT(frk,_lim) < __CONCAT(frk,_cur) ? \ (__CONCAT(frk,_lim) += sizeof (mb)->frk) : __CONCAT(frk,_lim)) #define MIDI_BUF_EXTENT_INIT(mb,frk) \ ((__CONCAT(frk,_org)=(mb)->frk), \ (__CONCAT(frk,_end)=__CONCAT(frk,_org)+sizeof (mb)->frk)) #define MIDI_BUF_CONSUMER_INIT(mb,frk) \ (MIDI_BUF_EXTENT_INIT((mb),frk), \ (__CONCAT(frk,_cur)=(mb)->__CONCAT(frk,_consumerp)), \ MIDI_BUF_CONSUMER_REFRESH((mb),frk)) #define MIDI_BUF_PRODUCER_INIT(mb,frk) \ (MIDI_BUF_EXTENT_INIT((mb),frk), \ (__CONCAT(frk,_cur)=(mb)->__CONCAT(frk,_producerp)), \ MIDI_BUF_PRODUCER_REFRESH((mb),frk)) #define MIDI_BUF_WRAP(frk) \ (__predict_false(__CONCAT(frk,_cur)==__CONCAT(frk,_end)) ? (\ (__CONCAT(frk,_lim)-=__CONCAT(frk,_end)-__CONCAT(frk,_org)), \ (__CONCAT(frk,_cur)=__CONCAT(frk,_org))) : __CONCAT(frk,_cur)) #define MIDI_BUF_CONSUMER_WBACK(mb,frk) do { \ __insn_barrier(); \ (mb)->__CONCAT(frk,_consumerp)=__CONCAT(frk,_cur); \ } while (/*CONSTCOND*/0) #define MIDI_BUF_PRODUCER_WBACK(mb,frk) do { \ __insn_barrier(); \ (mb)->__CONCAT(frk,_producerp)=__CONCAT(frk,_cur); \ } while (/*CONSTCOND*/0) #define MIDI_MAX_WRITE 32 /* max bytes written with busy wait */ #define MIDI_WAIT 10000 /* microseconds to wait after busy wait */ struct midi_state { struct evcnt bytesDiscarded; struct evcnt incompleteMessages; struct { uint32_t bytesDiscarded; uint32_t incompleteMessages; } atOpen, atQuery; int state; u_char *pos; u_char *end; u_char msg[3]; }; struct midi_softc { device_t dev; /* Hardware device struct */ void *hw_hdl; /* Hardware driver handle */ const struct midi_hw_if *hw_if; /* Hardware interface */ const struct midi_hw_if_ext *hw_if_ext; /* see midi_if.h */ int isopen; /* Open indicator */ int flags; /* Open flags */ int dying; struct midi_buffer outbuf; struct midi_buffer inbuf; int props; int refcnt; kcondvar_t detach_cv; kcondvar_t rchan; kcondvar_t wchan; kmutex_t *lock; int pbus; int rcv_expect_asense; int rcv_quiescent; int rcv_eof; struct selinfo wsel; /* write selector */ struct selinfo rsel; /* read selector */ pid_t async; /* process who wants audio SIGIO */ void *sih; struct callout xmt_asense_co; struct callout rcv_asense_co; /* MIDI input state machine; states are *s of 4 to allow | CAT bits */ struct midi_state rcv; struct midi_state xmt; #define MIDI_IN_START 0 #define MIDI_IN_RUN0_1 4 #define MIDI_IN_RUN1_1 8 #define MIDI_IN_RUN0_2 12 #define MIDI_IN_RUN1_2 16 #define MIDI_IN_RUN2_2 20 #define MIDI_IN_COM0_1 24 #define MIDI_IN_COM0_2 28 #define MIDI_IN_COM1_2 32 #define MIDI_IN_SYX1_3 36 #define MIDI_IN_SYX2_3 40 #define MIDI_IN_SYX0_3 44 #define MIDI_IN_RNX0_1 48 #define MIDI_IN_RNX0_2 52 #define MIDI_IN_RNX1_2 56 #define MIDI_IN_RNY1_2 60 /* not needed except for accurate error counts */ /* * Four more states are needed to model the equivalence of NoteOff vel. 64 * and NoteOn vel. 0 for canonicalization or compression. In each of these 4 * states, we know the last message input and output was a NoteOn or a NoteOff. */ #define MIDI_IN_RXX2_2 64 /* last output == msg[0] != last input */ #define MIDI_IN_RXX0_2 68 /* last output != msg[0] == this input */ #define MIDI_IN_RXX1_2 72 /* " */ #define MIDI_IN_RXY1_2 76 /* variant of RXX1_2 needed for error count only */ #define MIDI_CAT_DATA 0 #define MIDI_CAT_STATUS1 1 #define MIDI_CAT_STATUS2 2 #define MIDI_CAT_COMMON 3 /* Synthesizer emulation stuff */ int seqopen; struct midi_dev *seq_md; /* structure that links us with the seq. */ }; #define MIDIUNIT(d) ((d) & 0xff) #endif /* _SYS_DEV_MIDIVAR_H_ */