/* $NetBSD: machdep.c,v 1.140 2023/12/20 05:18:00 thorpej Exp $ */ /* * Copyright (c) 1988 University of Utah. * Copyright (c) 1982, 1986, 1990, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * the Systems Programming Group of the University of Utah Computer * Science Department. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * from: Utah Hdr: machdep.c 1.74 92/12/20 * from: @(#)machdep.c 8.10 (Berkeley) 4/20/94 */ #include __KERNEL_RCSID(0, "$NetBSD: machdep.c,v 1.140 2023/12/20 05:18:00 thorpej Exp $"); #include "opt_ddb.h" #include "opt_kgdb.h" #include "opt_modular.h" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* for MID_* */ #include #include #include #include #include #include #include #ifdef KGDB #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #include #if defined(DDB) #include #include #include #endif #include #include "ksyms.h" /* Defined in locore.s */ extern char kernel_text[]; /* Defined by the linker */ extern char etext[]; /* kernel_arch specific values required by module(9) */ const vaddr_t kernbase = KERNBASE3X; const vaddr_t kern_end = KERN_END3X; /* Our exported CPU info; we can have only one. */ struct cpu_info cpu_info_store; struct vm_map *phys_map = NULL; int fputype; void * msgbufaddr; /* Virtual page frame for /dev/mem (see mem.c) */ vaddr_t vmmap; u_char cpu_machine_id = 0; const char *cpu_string = NULL; int cpu_has_vme = 0; int has_iocache = 0; vaddr_t dumppage; static void identifycpu(void); static void initcpu(void); /* * Console initialization: called early on from main, * before vm init or cpu_startup. This system is able * to use the console for output immediately (via PROM) * but can not use it for input until after this point. */ void consinit(void) { /* * Switch from the PROM console (output only) * to our own console driver. */ cninit(); #if NKSYMS || defined(DDB) || defined(MODULAR) { extern int nsym; extern char *ssym, *esym; ksyms_addsyms_elf(nsym, ssym, esym); } #endif /* DDB */ /* * Now that the console can do input as well as * output, consider stopping for a debugger. */ if (boothowto & RB_KDB) { #ifdef KGDB /* XXX - Ask on console for kgdb_dev? */ /* Note: this will just return if kgdb_dev==NODEV */ kgdb_connect(1); #else /* KGDB */ /* Either DDB or no debugger (just PROM). */ Debugger(); #endif /* KGDB */ } } /* * cpu_startup: allocate memory for variable-sized tables, * initialize CPU, and do autoconfiguration. * * This is called early in init_main.c:main(), after the * kernel memory allocator is ready for use, but before * the creation of processes 1,2, and mountroot, etc. */ void cpu_startup(void) { char *v; vaddr_t minaddr, maxaddr; char pbuf[9]; /* * Initialize message buffer (for kernel printf). * This is put in physical page zero so it will * always be in the same place after a reboot. * Its mapping was prepared in pmap_bootstrap(). * Also, offset some to avoid PROM scribbles. */ v = (char *)KERNBASE3X; msgbufaddr = v + MSGBUFOFF; initmsgbuf(msgbufaddr, MSGBUFSIZE); /* * Good {morning,afternoon,evening,night}. */ printf("%s%s", copyright, version); identifycpu(); initfpu(); /* also prints FPU type */ format_bytes(pbuf, sizeof(pbuf), ctob(physmem)); printf("total memory = %s\n", pbuf); /* * Get scratch page for dumpsys(). */ dumppage = uvm_km_alloc(kernel_map, PAGE_SIZE, 0, UVM_KMF_WIRED); if (dumppage == 0) panic("startup: alloc dumppage"); minaddr = 0; /* * Allocate a submap for physio */ phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr, VM_PHYS_SIZE, 0, false, NULL); format_bytes(pbuf, sizeof(pbuf), ptoa(uvm_availmem(false))); printf("avail memory = %s\n", pbuf); /* * Allocate a virtual page (for use by /dev/mem) * This page is handed to pmap_enter() therefore * it has to be in the normal kernel VA range. */ vmmap = uvm_km_alloc(kernel_map, PAGE_SIZE, 0, UVM_KMF_VAONLY | UVM_KMF_WAITVA); /* * Create the DVMA maps. */ dvma_init(); /* * Set up CPU-specific registers, cache, etc. */ initcpu(); } /* * Info for CTL_HW */ char machine[16] = MACHINE; /* from */ char kernel_arch[16] = "sun3x"; /* XXX needs a sysctl node */ /* * XXX - Should empirically estimate the divisor... * Note that the value of delay_divisor is roughly * 2048 / cpuclock (where cpuclock is in MHz). */ int delay_divisor = 62; /* assume the fastest (33 MHz) */ void identifycpu(void) { u_char machtype; machtype = identity_prom.idp_machtype; if ((machtype & IDM_ARCH_MASK) != IDM_ARCH_SUN3X) { printf("Bad IDPROM arch!\n"); sunmon_abort(); } cpu_machine_id = machtype; switch (cpu_machine_id) { case ID_SUN3X_80: cpu_string = "80"; /* Hydra */ delay_divisor = 102; /* 20 MHz */ cpu_has_vme = false; break; case ID_SUN3X_470: cpu_string = "470"; /* Pegasus */ delay_divisor = 62; /* 33 MHz */ cpu_has_vme = true; break; default: printf("unknown sun3x model\n"); sunmon_abort(); } /* Other stuff? (VAC, mc6888x version, etc.) */ /* Note: miniroot cares about the kernel_arch part. */ cpu_setmodel("%s %s", kernel_arch, cpu_string); printf("Model: %s\n", cpu_getmodel()); } /* * machine dependent system variables. */ #if 0 /* XXX - Not yet... */ static int sysctl_machdep_root_device(SYSCTLFN_ARGS) { struct sysctlnode node = *rnode; node.sysctl_data = some permutation on root_device; node.sysctl_size = strlen(root_device) + 1; return (sysctl_lookup(SYSCTLFN_CALL(&node))); } static int sysctl_machdep_booted_kernel(SYSCTLFN_ARGS) { struct sysctlnode node = *rnode; node.sysctl_data = some permutation on booted_kernel; node.sysctl_size = strlen(booted_kernel) + 1; return (sysctl_lookup(SYSCTLFN_CALL(&node))); } #endif SYSCTL_SETUP(sysctl_machdep_setup, "sysctl machdep subtree setup") { sysctl_createv(clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_NODE, "machdep", NULL, NULL, 0, NULL, 0, CTL_MACHDEP, CTL_EOL); sysctl_createv(clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_STRUCT, "console_device", NULL, sysctl_consdev, 0, NULL, sizeof(dev_t), CTL_MACHDEP, CPU_CONSDEV, CTL_EOL); #if 0 /* XXX - Not yet... */ sysctl_createv(clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_STRING, "root_device", NULL, sysctl_machdep_root_device, 0, NULL, 0, CTL_MACHDEP, CPU_ROOT_DEVICE, CTL_EOL); sysctl_createv(clog, 0, NULL, NULL, CTLFLAG_PERMANENT, CTLTYPE_STRING, "booted_kernel", NULL, sysctl_machdep_booted_kernel, 0, NULL, 0, CTL_MACHDEP, CPU_BOOTED_KERNEL, CTL_EOL); #endif } /* See: sig_machdep.c */ /* * Do a sync in preparation for a reboot. * XXX - This could probably be common code. * XXX - And now, most of it is in vfs_shutdown() * XXX - Put waittime checks in there too? */ int waittime = -1; /* XXX - Who else looks at this? -gwr */ static void reboot_sync(void) { /* Check waittime here to localize its use to this function. */ if (waittime >= 0) return; waittime = 0; vfs_shutdown(); } /* * Common part of the BSD and SunOS reboot system calls. */ __dead void cpu_reboot(int howto, char *user_boot_string) { /* Note: this string MUST be static! */ static char bootstr[128]; char *p; /* If system is cold, just halt. (early panic?) */ if (cold) goto haltsys; /* Un-blank the screen if appropriate. */ cnpollc(1); if ((howto & RB_NOSYNC) == 0) { reboot_sync(); /* * If we've been adjusting the clock, the todr * will be out of synch; adjust it now. * * XXX - However, if the kernel has been sitting in ddb, * the time will be way off, so don't set the HW clock! * XXX - Should do sanity check against HW clock. -gwr */ /* resettodr(); */ } /* Disable interrupts. */ splhigh(); /* Write out a crash dump if asked. */ if (howto & RB_DUMP) dumpsys(); /* run any shutdown hooks */ doshutdownhooks(); pmf_system_shutdown(boothowto); if (howto & RB_HALT) { haltsys: printf("halted.\n"); sunmon_halt(); } /* * Automatic reboot. */ if (user_boot_string) strncpy(bootstr, user_boot_string, sizeof(bootstr)); else { /* * Build our own boot string with an empty * boot device/file and (maybe) some flags. * The PROM will supply the device/file name. */ p = bootstr; *p = '\0'; if (howto & (RB_KDB|RB_ASKNAME|RB_SINGLE)) { /* Append the boot flags. */ *p++ = ' '; *p++ = '-'; if (howto & RB_KDB) *p++ = 'd'; if (howto & RB_ASKNAME) *p++ = 'a'; if (howto & RB_SINGLE) *p++ = 's'; *p = '\0'; } } printf("rebooting...\n"); sunmon_reboot(bootstr); for (;;) ; /*NOTREACHED*/ } /* * These variables are needed by /sbin/savecore */ uint32_t dumpmag = 0x8fca0101; /* magic number */ int dumpsize = 0; /* pages */ long dumplo = 0; /* blocks */ #define DUMP_EXTRA 1 /* CPU-dependent extra pages */ /* * This is called by main to set dumplo, dumpsize. * Dumps always skip the first PAGE_SIZE of disk space * in case there might be a disk label stored there. * If there is extra space, put dump at the end to * reduce the chance that swapping trashes it. */ void cpu_dumpconf(void) { int devblks; /* size of dump device in blocks */ int dumpblks; /* size of dump image in blocks */ if (dumpdev == NODEV) return; devblks = bdev_size(dumpdev); if (devblks <= ctod(1)) return; devblks &= ~(ctod(1) - 1); /* * Note: savecore expects dumpsize to be the * number of pages AFTER the dump header. */ dumpsize = physmem; /* pages */ /* Position dump image near end of space, page aligned. */ dumpblks = ctod(physmem + DUMP_EXTRA); dumplo = devblks - dumpblks; /* If it does not fit, truncate it by moving dumplo. */ /* Note: Must force signed comparison. */ if (dumplo < ((long)ctod(1))) { dumplo = ctod(1); dumpsize = dtoc(devblks - dumplo) - DUMP_EXTRA; } } /* Note: gdb looks for "dumppcb" in a kernel crash dump. */ struct pcb dumppcb; /* * Write a crash dump. The format while in swap is: * kcore_seg_t cpu_hdr; * cpu_kcore_hdr_t cpu_data; * padding (PAGE_SIZE-sizeof(kcore_seg_t)) * pagemap (2*PAGE_SIZE) * physical memory... */ void dumpsys(void) { const struct bdevsw *dsw; kcore_seg_t *kseg_p; cpu_kcore_hdr_t *chdr_p; struct sun3x_kcore_hdr *sh; phys_ram_seg_t *crs_p; char *vaddr; paddr_t paddr; int psize, todo, seg, segsz; daddr_t blkno; int error = 0; if (dumpdev == NODEV) return; dsw = bdevsw_lookup(dumpdev); if (dsw == NULL || dsw->d_psize == NULL) return; /* * For dumps during autoconfiguration, * if dump device has already configured... */ if (dumpsize == 0) cpu_dumpconf(); if (dumplo <= 0) { printf("\ndump to dev %u,%u not possible\n", major(dumpdev), minor(dumpdev)); return; } savectx(&dumppcb); psize = bdev_size(dumpdev); if (psize == -1) { printf("dump area unavailable\n"); return; } printf("\ndumping to dev %u,%u offset %ld\n", major(dumpdev), minor(dumpdev), dumplo); /* * Prepare the dump header */ blkno = dumplo; todo = dumpsize; /* pages */ vaddr = (char *)dumppage; memset(vaddr, 0, PAGE_SIZE); /* Set pointers to all three parts. */ kseg_p = (kcore_seg_t *)vaddr; chdr_p = (cpu_kcore_hdr_t *)(kseg_p + 1); sh = &chdr_p->un._sun3x; /* Fill in kcore_seg_t part. */ CORE_SETMAGIC(*kseg_p, KCORE_MAGIC, MID_MACHINE, CORE_CPU); kseg_p->c_size = (ctob(DUMP_EXTRA) - sizeof(*kseg_p)); /* Fill in cpu_kcore_hdr_t part. */ strncpy(chdr_p->name, kernel_arch, sizeof(chdr_p->name)); chdr_p->page_size = PAGE_SIZE; chdr_p->kernbase = KERNBASE3X; /* Fill in the sun3x_kcore_hdr part. */ pmap_kcore_hdr(sh); /* Write out the dump header. */ error = (*dsw->d_dump)(dumpdev, blkno, vaddr, PAGE_SIZE); if (error) goto fail; blkno += btodb(PAGE_SIZE); /* * Now dump physical memory. Note that physical memory * might NOT be congiguous, so do it by segments. */ vaddr = (char *)vmmap; /* Borrow /dev/mem VA */ for (seg = 0; seg < SUN3X_NPHYS_RAM_SEGS; seg++) { crs_p = &sh->ram_segs[seg]; paddr = crs_p->start; segsz = crs_p->size; while (todo && (segsz > 0)) { /* Print pages left after every 16. */ if ((todo & 0xf) == 0) printf_nolog("\r%4d", todo); /* Make a temporary mapping for the page. */ pmap_kenter_pa(vmmap, paddr | PMAP_NC, VM_PROT_READ, 0); pmap_update(pmap_kernel()); error = (*dsw->d_dump)(dumpdev, blkno, vaddr, PAGE_SIZE); pmap_kremove(vmmap, PAGE_SIZE); pmap_update(pmap_kernel()); if (error) goto fail; paddr += PAGE_SIZE; segsz -= PAGE_SIZE; blkno += btodb(PAGE_SIZE); todo--; } } printf("\rdump succeeded\n"); return; fail: printf(" dump error=%d\n", error); } static void initcpu(void) { /* XXX: Enable RAM parity/ECC checking? */ /* XXX: parityenable(); */ #ifdef HAVECACHE cache_enable(); #endif } /* straptrap() in trap.c */ /* from hp300: badaddr() */ /* peek_byte(), peek_word() moved to bus_subr.c */ /* XXX: parityenable() ? */ /* regdump() moved to regdump.c */ /* * cpu_exec_aout_makecmds(): * CPU-dependent a.out format hook for execve(). * * Determine if the given exec package refers to something which we * understand and, if so, set up the vmcmds for it. */ int cpu_exec_aout_makecmds(struct lwp *l, struct exec_package *epp) { return ENOEXEC; } int mm_md_physacc(paddr_t pa, vm_prot_t prot) { return pmap_pa_exists(pa) ? 0 : EFAULT; } bool mm_md_direct_mapped_phys(paddr_t paddr, vaddr_t *vaddr) { extern paddr_t avail_start; if (paddr >= avail_start) return false; *vaddr = KERNBASE3X + paddr; return true; } /* * Allow access to the PROM mapping similar to uvm_kernacc(). */ int mm_md_kernacc(void *ptr, vm_prot_t prot, bool *handled) { if ((vaddr_t)ptr < SUN3X_PROM_BASE || (vaddr_t)ptr > SUN3X_MONEND) { *handled = false; return 0; } *handled = true; /* Read in the PROM itself is OK. */ if ((prot & VM_PROT_WRITE) == 0) return 0; /* PROM data page is OK for read/write. */ if ((vaddr_t)ptr >= SUN3X_MONDATA && (vaddr_t)ptr < SUN3X_MONDATA + PAGE_SIZE) return 0; return EFAULT; } #ifdef MODULAR /* * Push any modules loaded by the bootloader etc. */ void module_init_md(void) { } #endif