/* $NetBSD: if_ie_vme.c,v 1.23 2008/06/28 12:13:38 tsutsui Exp $ */ /*- * Copyright (c) 1996 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Gordon W. Ross. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /* * Machine-dependent glue for the Intel Ethernet (ie) driver. */ #include __KERNEL_RCSID(0, "$NetBSD: if_ie_vme.c,v 1.23 2008/06/28 12:13:38 tsutsui Exp $"); #include "opt_inet.h" #include #include #include #include #include #include #include #ifdef INET #include #include #include #include #include #endif #include #include #include #include #include #include "i82586.h" #include "if_iereg.h" #include "if_ievar.h" static void ie_vmereset(struct ie_softc *); static void ie_vmeattend(struct ie_softc *); static void ie_vmerun(struct ie_softc *); /* * zero/copy functions: OBIO can use the normal functions, but VME * must do only byte or half-word (16 bit) accesses... */ static void *wmemcpy(void *, const void *, size_t); static void *wmemset(void *, int, size_t); /* * New-style autoconfig attachment */ static int ie_vme_match(device_t, cfdata_t, void *); static void ie_vme_attach(device_t, device_t, void *); CFATTACH_DECL_NEW(ie_vme, sizeof(struct ie_softc), ie_vme_match, ie_vme_attach, NULL, NULL); static int ie_vme_match(device_t parent, cfdata_t cf, void *args) { struct confargs *ca = args; /* No default VME address. */ if (ca->ca_paddr == -1) return 0; /* Make sure something is there... */ if (bus_peek(ca->ca_bustype, ca->ca_paddr, 2) == -1) return 0; /* Default interrupt priority. */ if (ca->ca_intpri == -1) ca->ca_intpri = 3; return 1; } /* * *note*: we don't detect the difference between a VME3E and * a multibus/vme card. if you want to use a 3E you'll have * to fix this. */ void ie_vme_attach(device_t parent, device_t self, void *args) { struct ie_softc *sc = device_private(self); struct confargs *ca = args; volatile struct ievme *iev; u_long rampaddr; int lcv, off; sc->sc_dev = self; sc->hard_type = IE_VME; sc->reset_586 = ie_vmereset; sc->chan_attn = ie_vmeattend; sc->run_586 = ie_vmerun; sc->sc_memcpy = wmemcpy; sc->sc_memset = wmemset; /* * There is 64K of memory on the VME board. * (determined by hardware - NOT configurable!) */ sc->sc_msize = 0x10000; /* MEMSIZE 64K */ /* Map in the board control regs. */ sc->sc_reg = bus_mapin(ca->ca_bustype, ca->ca_paddr, sizeof(struct ievme)); iev = (volatile struct ievme *) sc->sc_reg; /* * Find and map in the board memory. */ /* top 12 bits */ rampaddr = ca->ca_paddr & 0xfff00000; /* 4 more */ rampaddr |= ((iev->status & IEVME_HADDR) << 16); sc->sc_maddr = bus_mapin(ca->ca_bustype, rampaddr, sc->sc_msize); /* * On this hardware, the i82586 address is just * masked to 16 bits, so sc_iobase == sc_maddr */ sc->sc_iobase = sc->sc_maddr; /* * Set up on-board mapping registers for linear map. */ iev->pectrl |= IEVME_PARACK; /* clear to start */ for (lcv = 0; lcv < IEVME_MAPSZ; lcv++) iev->pgmap[lcv] = IEVME_SBORDR | IEVME_OBMEM | lcv; (sc->sc_memset)(sc->sc_maddr, 0, sc->sc_msize); /* * Set the System Configuration Pointer (SCP). * Its location is system-dependent because the * i82586 reads it from a fixed physical address. * On this hardware, the i82586 address is just * masked down to 16 bits, so the SCP is found * at the end of the RAM on the VME board. */ off = IE_SCP_ADDR & 0xFFFF; sc->scp = (volatile void *)((char *)sc->sc_maddr + off); /* * The rest of ram is used for buffers, etc. */ sc->buf_area = sc->sc_maddr; sc->buf_area_sz = off; /* Set the ethernet address. */ idprom_etheraddr(sc->sc_addr); /* Do machine-independent parts of attach. */ ie_attach(sc); /* Install interrupt handler. */ isr_add_vectored(ie_intr, sc, ca->ca_intpri, ca->ca_intvec); } /* * MULTIBUS/VME support */ void ie_vmeattend(struct ie_softc *sc) { volatile struct ievme *iev = (struct ievme *)sc->sc_reg; iev->status |= IEVME_ATTEN; /* flag! */ iev->status &= ~IEVME_ATTEN; /* down. */ } void ie_vmereset(struct ie_softc *sc) { volatile struct ievme *iev = (struct ievme *)sc->sc_reg; iev->status = IEVME_RESET; delay(20); iev->status = (IEVME_ONAIR | IEVME_IENAB | IEVME_PEINT); } void ie_vmerun(struct ie_softc *sc) { /* do it all in reset */ } /* * wmemcpy/wmemset - like memcpy/memset but largest access is 16-bits, * and also does byte swaps... * XXX - Would be nice to have asm versions in some library... */ static void * wmemset(void *vb, int val, size_t l) { uint8_t *b = vb; uint8_t *be = b + l; uint16_t *sp; if (l == 0) return vb; /* front, */ if ((uint32_t)b & 1) *b++ = val; /* back, */ if (b != be && ((uint32_t)be & 1) != 0) { be--; *be = val; } /* and middle. */ sp = (uint16_t *)b; while (sp != (uint16_t *)be) *sp++ = val; return vb; } static void * wmemcpy(void *dst, const void *src, size_t l) { const uint8_t *b1e, *b1 = src; uint8_t *b2 = dst; const uint16_t *sp; int bstore = 0; if (l == 0) return dst; /* front, */ if ((uint32_t)b1 & 1) { *b2++ = *b1++; l--; } /* middle, */ sp = (const uint16_t *)b1; b1e = b1 + l; if (l & 1) b1e--; bstore = (uint32_t)b2 & 1; while (sp < (const uint16_t *)b1e) { if (bstore) { b2[1] = *sp & 0xff; b2[0] = *sp >> 8; } else *((uint16_t *)b2) = *sp; sp++; b2 += 2; } /* and back. */ if (l & 1) *b2 = *b1e; return dst; }