/* $NetBSD: bw2.c,v 1.37 2023/12/20 05:18:00 thorpej Exp $ */ /* * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This software was developed by the Computer Systems Engineering group * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and * contributed to Berkeley. * * All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the University of * California, Lawrence Berkeley Laboratory. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)bwtwo.c 8.1 (Berkeley) 6/11/93 */ /* * black&white display (bw2) driver. * * Does not handle interrupts, even though they can occur. */ #include __KERNEL_RCSID(0, "$NetBSD: bw2.c,v 1.37 2023/12/20 05:18:00 thorpej Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "ioconf.h" /* per-display variables */ struct bw2_softc { device_t sc_dev; /* base device */ struct fbdevice sc_fb; /* frame buffer device */ int sc_phys; /* display RAM (phys addr) */ /* If using overlay plane of something, it is... */ int sc_ovtype; /* ... this type. */ int sc_video_on; }; /* autoconfiguration driver */ static int bw2match(device_t, cfdata_t, void *); static void bw2attach(device_t, device_t, void *); CFATTACH_DECL_NEW(bwtwo, sizeof(struct bw2_softc), bw2match, bw2attach, NULL, NULL); dev_type_open(bw2open); dev_type_ioctl(bw2ioctl); dev_type_mmap(bw2mmap); const struct cdevsw bwtwo_cdevsw = { .d_open = bw2open, .d_close = nullclose, .d_read = noread, .d_write = nowrite, .d_ioctl = bw2ioctl, .d_stop = nostop, .d_tty = notty, .d_poll = nopoll, .d_mmap = bw2mmap, .d_kqfilter = nokqfilter, .d_discard = nodiscard, .d_flag = 0 }; /* XXX we do not handle frame buffer interrupts */ static int bw2gvideo(struct fbdevice *, void *); static int bw2svideo(struct fbdevice *, void *); static struct fbdriver bw2fbdriver = { bw2open, nullclose, bw2mmap, nokqfilter, fb_noioctl, bw2gvideo, bw2svideo, fb_noioctl, fb_noioctl, }; static int bw2match(device_t parent, cfdata_t cf, void *args) { struct confargs *ca = args; int mid, p4id, peekval; void *p4reg; /* No default address support. */ if (ca->ca_paddr == -1) return 0; /* * Slight hack here: The low four bits of the * config flags, if set, restrict the match to * that machine "implementation" only. */ mid = cf->cf_flags & IDM_IMPL_MASK; if (mid != 0 && (mid != (cpu_machine_id & IDM_IMPL_MASK))) return 0; /* * Make sure something is there, and if so, * see if it looks like a P4 register. */ p4reg = bus_tmapin(ca->ca_bustype, ca->ca_paddr); peekval = peek_long(p4reg); p4id = (peekval == -1) ? P4_NOTFOUND : fb_pfour_id(p4reg); bus_tmapout(p4reg); if (peekval == -1) return 0; /* * The config flag 0x40 if set means we should match * only on a CG? overlay plane. We can use only the * CG4 and CG8, which both have a P4 register. */ if (cf->cf_flags & 0x40) { switch (p4id) { case P4_ID_COLOR8P1: case P4_ID_COLOR24: return 1; case P4_NOTFOUND: default: return 0; } } /* * OK, we are expecting a plain old BW2, and * there may or may not be a P4 register. */ switch (p4id) { case P4_ID_BW: case P4_NOTFOUND: return 1; default: #ifdef DEBUG aprint_debug("bwtwo at 0x%lx match p4id=0x%x fails\n", ca->ca_paddr, p4id & 0xFF); #endif break; } return 0; } /* * Attach a display. We need to notice if it is the console, too. */ static void bw2attach(device_t parent, device_t self, void *args) { struct bw2_softc *sc = device_private(self); struct fbdevice *fb = &sc->sc_fb; struct confargs *ca = args; struct fbtype *fbt; void *p4reg; int p4id, tmp; int pixeloffset; /* offset to framebuffer */ sc->sc_dev = self; fbt = &fb->fb_fbtype; fbt->fb_type = FBTYPE_SUN2BW; fbt->fb_width = 1152; /* default - see below */ fbt->fb_height = 900; /* default - see below */ fbt->fb_depth = 1; fbt->fb_cmsize = 0; fbt->fb_size = BW2_FBSIZE; /* default - see below */ fb->fb_driver = &bw2fbdriver; fb->fb_private = sc; fb->fb_name = device_xname(self); fb->fb_flags = device_cfdata(self)->cf_flags; /* Set up default pixel offset. May be changed below. */ pixeloffset = 0; /* Does it have a P4 register? */ p4reg = bus_mapin(ca->ca_bustype, ca->ca_paddr, 4); p4id = fb_pfour_id(p4reg); if (p4id != P4_NOTFOUND) fb->fb_pfour = p4reg; else bus_mapout(p4reg, 4); switch (p4id) { case P4_NOTFOUND: pixeloffset = 0; break; case P4_ID_BW: pixeloffset = P4_BW_OFF; break; default: aprint_error("%s: bad p4id=0x%x\n", fb->fb_name, p4id); /* Must be some kinda color... */ /* FALLTHROUGH */ case P4_ID_COLOR8P1: case P4_ID_COLOR24: sc->sc_ovtype = p4id; pixeloffset = P4_COLOR_OFF_OVERLAY; break; } sc->sc_phys = ca->ca_paddr + pixeloffset; /* * Determine width and height as follows: * If it has a P4 register, use that; * else if unit==0, use the EEPROM size, * else make our best guess. */ if (fb->fb_pfour) fb_pfour_setsize(fb); /* XXX device_unit() abuse */ else if (device_unit(self) == 0) fb_eeprom_setsize(fb); else { /* Guess based on machine ID. */ switch (cpu_machine_id) { #ifdef _SUN3_ case ID_SUN3_60: /* * Only the model 60 can have hi-res. * Look at the "resolution" jumper. */ tmp = bus_peek(BUS_OBMEM, BW2_CR_PADDR, 1); if ((tmp != -1) && (tmp & 0x80) == 0) goto high_res; break; case ID_SUN3_260: /* The Sun3/260 is ALWAYS high-resolution! */ /* fall through */ high_res: fbt->fb_width = 1600; fbt->fb_height = 1280; fbt->fb_size = BW2_FBSIZE_HIRES; break; #endif /* SUN3 */ default: /* Leave the defaults set above. */ break; } } aprint_normal(" (%dx%d)\n", fbt->fb_width, fbt->fb_height); /* Make sure video is on. */ tmp = 1; bw2svideo(fb, &tmp); /* Let /dev/fb know we are here. */ fb_attach(fb, 1); } int bw2open(dev_t dev, int flags, int mode, struct lwp *l) { struct bw2_softc *sc; int unit = minor(dev); sc = device_lookup_private(&bwtwo_cd, unit); if (sc == NULL) return ENXIO; return 0; } int bw2ioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l) { struct bw2_softc *sc = device_lookup_private(&bwtwo_cd, minor(dev)); return fbioctlfb(&sc->sc_fb, cmd, data); } /* * Return the address that would map the given device at the given * offset, allowing for the given protection, or return -1 for error. */ paddr_t bw2mmap(dev_t dev, off_t off, int prot) { struct bw2_softc *sc = device_lookup_private(&bwtwo_cd, minor(dev)); int size = sc->sc_fb.fb_fbtype.fb_size; if (off & PGOFSET) panic("%s: bad offset", __func__); if ((off < 0) || (off >= size)) return -1; /* * I turned on PMAP_NC here to disable the cache as I was * getting horribly broken behaviour without it. */ return (sc->sc_phys + off) | PMAP_NC; } /* FBIOGVIDEO: */ static int bw2gvideo(struct fbdevice *fb, void *data) { struct bw2_softc *sc = fb->fb_private; int *on = data; *on = sc->sc_video_on; return 0; } /* FBIOSVIDEO: */ static int bw2svideo(struct fbdevice *fb, void *data) { struct bw2_softc *sc = fb->fb_private; int *on = data; if (sc->sc_video_on == *on) return 0; sc->sc_video_on = *on; if (fb->fb_pfour) fb_pfour_set_video(fb, sc->sc_video_on); else enable_video(sc->sc_video_on); return 0; }