*	$NetBSD: x_unfl.sa,v 1.5 2022/01/25 22:01:34 andvar Exp $

*	MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
*	M68000 Hi-Performance Microprocessor Division
*	M68040 Software Package 
*
*	M68040 Software Package Copyright (c) 1993, 1994 Motorola Inc.
*	All rights reserved.
*
*	THE SOFTWARE is provided on an "AS IS" basis and without warranty.
*	To the maximum extent permitted by applicable law,
*	MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
*	INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
*	PARTICULAR PURPOSE and any warranty against infringement with
*	regard to the SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF)
*	and any accompanying written materials. 
*
*	To the maximum extent permitted by applicable law,
*	IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
*	(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
*	PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR
*	OTHER PECUNIARY LOSS) ARISING OF THE USE OR INABILITY TO USE THE
*	SOFTWARE.  Motorola assumes no responsibility for the maintenance
*	and support of the SOFTWARE.  
*
*	You are hereby granted a copyright license to use, modify, and
*	distribute the SOFTWARE so long as this entire notice is retained
*	without alteration in any modified and/or redistributed versions,
*	and that such modified versions are clearly identified as such.
*	No licenses are granted by implication, estoppel or otherwise
*	under any patents or trademarks of Motorola, Inc.

*
*	x_unfl.sa 3.4 7/1/91
*
*	fpsp_unfl --- FPSP handler for underflow exception
*
* Trap disabled results
*	For 881/2 compatibility, sw must denormalize the intermediate 
* result, then store the result.  Denormalization is accomplished 
* by taking the intermediate result (which is always normalized) and 
* shifting the mantissa right while incrementing the exponent until 
* it is equal to the denormalized exponent for the destination 
* format.  After denormalization, the result is rounded to the 
* destination format.
*		
* Trap enabled results
* 	All trap disabled code applies.	In addition the exceptional 
* operand needs to made available to the user with a bias of $6000 
* added to the exponent.
*

X_UNFL	IDNT    2,1 Motorola 040 Floating Point Software Package

	section	8

	include	fpsp.h

	xref	denorm
	xref	round
	xref	store
	xref	g_rndpr
	xref	g_opcls
	xref	g_dfmtou
	xref	real_unfl
	xref	real_inex
	xref	fpsp_done
	xref	b1238_fix

	xdef	fpsp_unfl
fpsp_unfl:
	link		a6,#-LOCAL_SIZE
	fsave		-(a7)
	movem.l		d0-d1/a0-a1,USER_DA(a6)
	fmovem.x	fp0-fp3,USER_FP0(a6)
	fmovem.l	fpcr/fpsr/fpiar,USER_FPCR(a6)

*
	bsr.l		unf_res	;denormalize, round & store interm op
*
* If underflow exceptions are not enabled, check for inexact
* exception
*
	btst.b		#unfl_bit,FPCR_ENABLE(a6)
	beq.b		ck_inex

	btst.b		#E3,E_BYTE(a6)
	beq.b		no_e3_1
*
* Clear dirty bit on dest resister in the frame before branching
* to b1238_fix.
*
	bfextu		CMDREG3B(a6){6:3},d0	;get dest reg no
	bclr.b		d0,FPR_DIRTY_BITS(a6)	;clr dest dirty bit
	bsr.l		b1238_fix		;test for bug1238 case
	move.l		USER_FPSR(a6),FPSR_SHADOW(a6)
	or.l		#sx_mask,E_BYTE(a6)
no_e3_1:
	movem.l		USER_DA(a6),d0-d1/a0-a1
	fmovem.x	USER_FP0(a6),fp0-fp3
	fmovem.l	USER_FPCR(a6),fpcr/fpsr/fpiar
	frestore	(a7)+
	unlk		a6
	bra.l		real_unfl
*
* It is possible to have either inex2 or inex1 exceptions with the
* unfl.  If the inex enable bit is set in the FPCR, and either
* inex2 or inex1 occurred, we must clean up and branch to the
* real inex handler.
*
ck_inex:
	move.b		FPCR_ENABLE(a6),d0
	and.b		FPSR_EXCEPT(a6),d0
	andi.b		#$3,d0
	beq.b		unfl_done

*
* Inexact enabled and reported, and we must take an inexact exception
*	
take_inex:
	btst.b		#E3,E_BYTE(a6)
	beq.b		no_e3_2
*
* Clear dirty bit on dest resister in the frame before branching
* to b1238_fix.
*
	bfextu		CMDREG3B(a6){6:3},d0	;get dest reg no
	bclr.b		d0,FPR_DIRTY_BITS(a6)	;clr dest dirty bit
	bsr.l		b1238_fix		;test for bug1238 case
	move.l		USER_FPSR(a6),FPSR_SHADOW(a6)
	or.l		#sx_mask,E_BYTE(a6)
no_e3_2:
	move.b		#INEX_VEC,EXC_VEC+1(a6)
	movem.l         USER_DA(a6),d0-d1/a0-a1
	fmovem.x        USER_FP0(a6),fp0-fp3
	fmovem.l        USER_FPCR(a6),fpcr/fpsr/fpiar
	frestore        (a7)+
	unlk            a6
	bra.l		real_inex

unfl_done:
	bclr.b		#E3,E_BYTE(a6)
	beq.b		e1_set		;if set then branch
*
* Clear dirty bit on dest resister in the frame before branching
* to b1238_fix.
*
	bfextu		CMDREG3B(a6){6:3},d0		;get dest reg no
	bclr.b		d0,FPR_DIRTY_BITS(a6)	;clr dest dirty bit
	bsr.l		b1238_fix		;test for bug1238 case
	move.l		USER_FPSR(a6),FPSR_SHADOW(a6)
	or.l		#sx_mask,E_BYTE(a6)
	movem.l		USER_DA(a6),d0-d1/a0-a1
	fmovem.x	USER_FP0(a6),fp0-fp3
	fmovem.l	USER_FPCR(a6),fpcr/fpsr/fpiar
	frestore	(a7)+
	unlk		a6
	bra.l		fpsp_done
e1_set:
	movem.l		USER_DA(a6),d0-d1/a0-a1
	fmovem.x	USER_FP0(a6),fp0-fp3
	fmovem.l	USER_FPCR(a6),fpcr/fpsr/fpiar
	unlk		a6
	bra.l		fpsp_done
*
*	unf_res --- underflow result calculation
*
unf_res:
	bsr.l		g_rndpr		;returns RND_PREC in d0 0=ext,
*					;1=sgl, 2=dbl
*					;we need the RND_PREC in the
*					;upper word for round
	clr.w		-(a7)	
	move.w		d0,-(a7)	;copy RND_PREC to stack
*
*
* If the exception bit set is E3, the exceptional operand from the
* fpu is in WBTEMP; else it is in FPTEMP.
*
	btst.b		#E3,E_BYTE(a6)
	beq.b		unf_E1
unf_E3:
	lea		WBTEMP(a6),a0	;a0 now points to operand
*
* Test for fsgldiv and fsglmul.  If the inst was one of these, then
* force the precision to extended for the denorm routine.  Use
* the user's precision for the round routine.
*
	move.w		CMDREG3B(a6),d1	;check for fsgldiv or fsglmul
	andi.w		#$7f,d1
	cmpi.w		#$30,d1		;check for sgldiv
	beq.b		unf_sgl
	cmpi.w		#$33,d1		;check for sglmul
	bne.b		unf_cont	;if not, use fpcr prec in round
unf_sgl:
	clr.l		d0
	move.w		#$1,(a7)	;override g_rndpr precision
*					;force single
	bra.b		unf_cont
unf_E1:
	lea		FPTEMP(a6),a0	;a0 now points to operand
unf_cont:
	bclr.b		#sign_bit,LOCAL_EX(a0)	;clear sign bit
	sne		LOCAL_SGN(a0)		;store sign

	bsr.l		denorm		;returns denorm, a0 points to it
*
* WARNING:
*				;d0 has guard,round sticky bit
*				;make sure that it is not corrupted
*				;before it reaches the round subroutine
*				;also ensure that a0 isn't corrupted

*
* Set up d1 for round subroutine d1 contains the PREC/MODE
* information respectively on upper/lower register halves.
*
	bfextu		FPCR_MODE(a6){2:2},d1	;get mode from FPCR
*						;mode in lower d1
	add.l		(a7)+,d1		;merge PREC/MODE
*
* WARNING: a0 and d0 are assumed to be intact between the denorm and
* round subroutines. All code between these two subroutines
* must not corrupt a0 and d0.
*
*
* Perform Round	
*	Input:		a0 points to input operand
*			d0{31:29} has guard, round, sticky
*			d1{01:00} has rounding mode
*			d1{17:16} has rounding precision
*	Output:		a0 points to rounded operand
*

	bsr.l		round		;returns rounded denorm at (a0)
*
* Differentiate between store to memory vs. store to register
*
unf_store:
	bsr.l		g_opcls		;returns opclass in d0{2:0}
	cmpi.b		#$3,d0
	bne.b		not_opc011
*
* At this point, a store to memory is pending
*
opc011:
	bsr.l		g_dfmtou
	tst.b		d0
	beq.b		ext_opc011	;If extended, do not subtract
* 				;If destination format is sgl/dbl, 
	tst.b		LOCAL_HI(a0)	;If rounded result is normal,don't
*					;subtract
	bmi.b		ext_opc011
	subq.w		#1,LOCAL_EX(a0)	;account for denorm bias vs.
*				;normalized bias
*				;          normalized   denormalized
*				;single       $7f           $7e
*				;double       $3ff          $3fe
*
ext_opc011:
	bsr.l		store		;stores to memory
	bra.b		unf_done	;finish up

*
* At this point, a store to a float register is pending
*
not_opc011:
	bsr.l		store	;stores to float register
*				;a0 is not corrupted on a store to a
*				;float register.
*
* Set the condition codes according to result
*
	tst.l		LOCAL_HI(a0)	;check upper mantissa
	bne.b		ck_sgn
	tst.l		LOCAL_LO(a0)	;check lower mantissa
	bne.b		ck_sgn
	bset.b		#z_bit,FPSR_CC(a6) ;set condition codes if zero
ck_sgn:
	btst.b 		#sign_bit,LOCAL_EX(a0)	;check the sign bit
	beq.b		unf_done
	bset.b		#neg_bit,FPSR_CC(a6)

*
* Finish.  
*
unf_done:
	btst.b		#inex2_bit,FPSR_EXCEPT(a6)
	beq.b		no_aunfl
	bset.b		#aunfl_bit,FPSR_AEXCEPT(a6)
no_aunfl:
	rts

	end