*	$NetBSD: x_fline.sa,v 1.2 1994/10/26 07:50:23 cgd Exp $

*	MOTOROLA MICROPROCESSOR & MEMORY TECHNOLOGY GROUP
*	M68000 Hi-Performance Microprocessor Division
*	M68040 Software Package 
*
*	M68040 Software Package Copyright (c) 1993, 1994 Motorola Inc.
*	All rights reserved.
*
*	THE SOFTWARE is provided on an "AS IS" basis and without warranty.
*	To the maximum extent permitted by applicable law,
*	MOTOROLA DISCLAIMS ALL WARRANTIES WHETHER EXPRESS OR IMPLIED,
*	INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
*	PARTICULAR PURPOSE and any warranty against infringement with
*	regard to the SOFTWARE (INCLUDING ANY MODIFIED VERSIONS THEREOF)
*	and any accompanying written materials. 
*
*	To the maximum extent permitted by applicable law,
*	IN NO EVENT SHALL MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
*	(INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS
*	PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR
*	OTHER PECUNIARY LOSS) ARISING OF THE USE OR INABILITY TO USE THE
*	SOFTWARE.  Motorola assumes no responsibility for the maintenance
*	and support of the SOFTWARE.  
*
*	You are hereby granted a copyright license to use, modify, and
*	distribute the SOFTWARE so long as this entire notice is retained
*	without alteration in any modified and/or redistributed versions,
*	and that such modified versions are clearly identified as such.
*	No licenses are granted by implication, estoppel or otherwise
*	under any patents or trademarks of Motorola, Inc.

*
*	x_fline.sa 3.3 1/10/91
*
*	fpsp_fline --- FPSP handler for fline exception
*
*	First determine if the exception is one of the unimplemented
*	floating point instructions.  If so, let fpsp_unimp handle it.
*	Next, determine if the instruction is an fmovecr with a non-zero
*	<ea> field.  If so, handle here and return.  Otherwise, it
*	must be a real F-line exception.
*

X_FLINE	IDNT    2,1 Motorola 040 Floating Point Software Package

	section	8

	include	fpsp.h

	xref	real_fline
	xref	fpsp_unimp
	xref	uni_2
	xref	mem_read
	xref	fpsp_fmt_error

	xdef	fpsp_fline
fpsp_fline:
*
*	check for unimplemented vector first.  Use EXC_VEC-4 because
*	the equate is valid only after a 'link a6' has pushed one more
*	long onto the stack.
*
	cmp.w	#UNIMP_VEC,EXC_VEC-4(a7)
	beq.l	fpsp_unimp

*
*	fmovecr with non-zero <ea> handling here
*
	sub.l	#4,a7		;4 accounts for 2-word difference
*				;between six word frame (unimp) and
*				;four word frame
	link	a6,#-LOCAL_SIZE
	fsave	-(a7)
	movem.l	d0-d1/a0-a1,USER_DA(a6)
	movea.l	EXC_PC+4(a6),a0	;get address of fline instruction
	lea.l	L_SCR1(a6),a1	;use L_SCR1 as scratch
	move.l	#4,d0
	add.l	#4,a6		;to offset the sub.l #4,a7 above so that
*				;a6 can point correctly to the stack frame 
*				;before branching to mem_read
	bsr.l	mem_read
	sub.l	#4,a6
	move.l	L_SCR1(a6),d0	;d0 contains the fline and command word
	bfextu	d0{4:3},d1	;extract coprocessor id
	cmpi.b	#1,d1		;check if cpid=1
	bne.w	not_mvcr	;exit if not
	bfextu	d0{16:6},d1
	cmpi.b	#$17,d1		;check if it is an FMOVECR encoding
	bne.w	not_mvcr	
*				;if an FMOVECR instruction, fix stack
*				;and go to FPSP_UNIMP
fix_stack:
	cmpi.b	#VER_40,(a7)	;test for orig unimp frame
	bne.b	ck_rev
	sub.l	#UNIMP_40_SIZE-4,a7 ;emulate an orig fsave
	move.b	#VER_40,(a7)
	move.b	#UNIMP_40_SIZE-4,1(a7)
	clr.w	2(a7)
	bra.b	fix_con
ck_rev:
	cmpi.b	#VER_41,(a7)	;test for rev unimp frame
	bne.l	fpsp_fmt_error	;if not $40 or $41, exit with error
	sub.l	#UNIMP_41_SIZE-4,a7 ;emulate a rev fsave
	move.b	#VER_41,(a7)
	move.b	#UNIMP_41_SIZE-4,1(a7)
	clr.w	2(a7)
fix_con:
	move.w	EXC_SR+4(a6),EXC_SR(a6) ;move stacked sr to new position
	move.l	EXC_PC+4(a6),EXC_PC(a6) ;move stacked pc to new position
	fmove.l	EXC_PC(a6),FPIAR ;point FPIAR to fline inst
	move.l	#4,d1
	add.l	d1,EXC_PC(a6)	;increment stacked pc value to next inst
	move.w	#$202c,EXC_VEC(a6) ;reformat vector to unimp
	clr.l	EXC_EA(a6)	;clear the EXC_EA field
	move.w	d0,CMDREG1B(a6) ;move the lower word into CMDREG1B
	clr.l	E_BYTE(a6)
	bset.b	#UFLAG,T_BYTE(a6)
	movem.l	USER_DA(a6),d0-d1/a0-a1 ;restore data registers
	bra.l	uni_2

not_mvcr:
	movem.l	USER_DA(a6),d0-d1/a0-a1 ;restore data registers
	frestore (a7)+
	unlk	a6
	add.l	#4,a7
	bra.l	real_fline

	end