/* $NetBSD: viper_start.S,v 1.6 2011/01/31 06:28:06 matt Exp $ */ /* * Copyright (c) 2005 Antti Kantee. All Rights Reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the company nor the name of the author may be used to * endorse or promote products derived from this software without specific * prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include #include #include "assym.h" RCSID("$NetBSD: viper_start.S,v 1.6 2011/01/31 06:28:06 matt Exp $") /* * We start out with RAM mapped to the bottom 64MB. We are jogging * happily there with the MMU on. Our mission: map some important * bootstrap devices (such as console port) in addition to mapping * the physical RAM to 0xc0... * * If I try to create a mapping from scratch, something important gets * wiped out (never could figure out exactly what), so we do this with * the MMU on adding to the existing translation table. */ #define CPWAIT_BRANCH \ sub pc, pc, #4 #define CPWAIT(tmp) \ mrc p15, 0, tmp, c2, c0, 0 /* arbitrary read of CP15 */ ;\ mov tmp, tmp /* wait for it to complete */ ;\ CPWAIT_BRANCH /* branch to next insn */ #ifndef SDRAM_START #define SDRAM_START 0xa0000000 #endif #define XSCALE_DCACHE_SIZE 0x8000 .text .global _C_LABEL(viper_start) _C_LABEL(viper_start): /* Figure out where we want to jump to when the time comes */ adr r8, .Linva ldr r8, [r8] /* * Start playing with the virtual address space mapping * for initial bootstrap. * * Load registers, which will remain constant throughout * building the VA mapping. */ mov r2, #(L1_S_SIZE) /* 1MB chunks */ /* * First map SDRAM VA == PA. This enables us to cut&waste * some existing initarm() code without modification * (and, if, god forbid, someone would like to unify them * some day, this'll make that job easier) */ mrc p15, 0, r0, c2, c0, 0 /* Get L1 */ bic r0, r0, #0xff000000 add r0, r0, #(0xa00 * 4) /* offset to 0xa0.. */ mov r3, #SDRAM_START /* map to 0xa00.. */ orr r3, r3, #(L1_S_AP_KRW) /* the usual perms & stuff */ orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) mov r1, #0x40 /* 64 1MB entries */ 1: /* and looplooploop */ str r3, [r0], #4 add r3, r3, r2 subs r1, r1, #1 bgt 1b /* * Map SDRAM also to VA 0xc00... */ mrc p15, 0, r0, c2, c0, 0 /* Get L1 */ bic r0, r0, #0xff000000 add r0, r0, #(0xc00 * 4) /* start from 0xc00.. */ mov r3, #SDRAM_START /* map to 0xa00.. */ orr r3, r3, #(L1_S_AP_KRW) /* the usual perms & stuff */ orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) mov r1, #0x40 /* 64 1MB entries */ 1: /* and looplooploop */ str r3, [r0], #4 add r3, r3, r2 subs r1, r1, #1 bgt 1b /* * Here come the devices. Map an L1 section for each device * to make this easy. */ /* INTCTL */ mrc p15, 0, r0, c2, c0, 0 /* Get L1 */ bic r0, r0, #0xff000000 add r0, r0, #(0xfd0 * 4) /* offset to 0xfd000000 */ mov r3, #0x40000000 orr r3, r3, #0x00d00000 orr r3, r3, #(L1_S_AP_KRW) orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) str r3, [r0], #4 /* GPIO */ mov r3, #0x40000000 orr r3, r3, #0x00e00000 orr r3, r3, #(L1_S_AP_KRW) orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) str r3, [r0], #4 /* CLKMAN */ mov r3, #0x41000000 orr r3, r3, #0x00300000 orr r3, r3, #(L1_S_AP_KRW) orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) str r3, [r0], #4 /* FFUART */ mov r3, #0x40000000 orr r3, r3, #0x00100000 orr r3, r3, #(L1_S_AP_KRW) orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) str r3, [r0], #4 /* BTUART */ mov r3, #0x40000000 orr r3, r3, #0x00200000 orr r3, r3, #(L1_S_AP_KRW) orr r3, r3, #(L1_TYPE_S) orr r3, r3, #(L1_S_DOM_KERNEL) str r3, [r0], #4 #if 0 /* * Cache cleanup. Not needed here? Slight speedup in booting. */ mov r3, #(XSCALE_DCACHE_SIZE) subs r3, r3, #32 1: mcr p15, 0, r3, c7, c10, 2 subs r3, r3, #32 bne 1b CPWAIT(r3) /* Drain write buffer */ mcr p15, 0, r6, c7, c10, 4 #endif /* * Make domain control go ful fart. * We probably could be slightly more sensible about this, * but it'll be replaced soon anyway, so why bother. */ mov r0, #0xffffffff mcr p15, 0, r0, c3, c0, 0 /* * Relocate the kernel to where we want it, not where Redboot * let's us load it. Don't bother jumping after this stage, * we'll do that soon enough anyway, and to the correct virtual * address space region I might add. */ adr r0, _C_LABEL(viper_start) /* start copy from here */ add r0, r0, #SDRAM_START /* offset to SDRAM mapping */ ldr r1, .Lcopy_size /* copy this much (bytes) */ add r1, r1, #3 /* prepare for roundup */ mov r1, r1, LSR #2 /* make it words */ mov r2, #SDRAM_START /* target address, */ add r2, r2, #0x00200000 /* kernel offsets by 2megs */ /* after this it's just a load-store-loop */ 1: ldr r3, [r0], #4 str r3, [r2], #4 subs r1, r1, #1 bgt 1b /* * Now let's clean the cache again to make sure everything * is in place. * * XXX: should this take into account the XScale cache clean bug? */ mov r3, #(XSCALE_DCACHE_SIZE) subs r3, r3, #32 1: mcr p15, 0, r3, c7, c10, 2 subs r3, r3, #32 bne 1b CPWAIT(r3) /* Drain write buffer */ mcr p15, 0, r6, c7, c10, 4 /* Invalidate TLBs just to be sure */ mcr p15, 0, r0, c8, c7, 0 /* * You are standing at the gate to NetBSD. --More-- * Unspeakable cruelty and harm lurk down there. --More-- * Are you sure you want to enter? */ mov pc, r8 /* So be it */ /* symbol to use for address calculation in the right VA */ .Linva: .word start /* * Calculate size of kernel to copy. Don't bother to copy bss, * although I guess the CPU could use the warmup exercise ... */ .Lcopy_size: .word _edata - _C_LABEL(viper_start)