/* $NetBSD: exynos_dwcmmc.c,v 1.15 2021/03/14 08:16:57 skrll Exp $ */ /*- * Copyright (c) 2015 Jared D. McNeill * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #include __KERNEL_RCSID(0, "$NetBSD: exynos_dwcmmc.c,v 1.15 2021/03/14 08:16:57 skrll Exp $"); #include #include #include #include #include #include #include #include #include #include #include #include #define MPS_BEGIN 0x200 #define MPS_END 0x204 #define MPS_CTRL 0x20c #define MPS_CTRL_SECURE_WRITE __BIT(6) #define MPS_CTRL_NON_SECURE_READ __BIT(5) #define MPS_CTRL_NON_SECURE_WRITE __BIT(4) #define MPS_CTRL_VALID __BIT(0) static int exynos_dwcmmc_match(device_t, cfdata_t, void *); static void exynos_dwcmmc_attach(device_t, device_t, void *); static int exynos_dwcmmc_card_detect(struct dwc_mmc_softc *); static int exynos_dwcmmc_bus_clock(struct dwc_mmc_softc *, int); struct exynos_dwcmmc_softc { struct dwc_mmc_softc sc; struct clk *sc_clk_biu; struct clk *sc_clk_ciu; struct fdtbus_gpio_pin *sc_pin_cd; u_int sc_ciu_div; }; CFATTACH_DECL_NEW(exynos_dwcmmc, sizeof(struct exynos_dwcmmc_softc), exynos_dwcmmc_match, exynos_dwcmmc_attach, NULL, NULL); static const struct device_compatible_entry compat_data[] = { /* disable encryption mode? */ { .compat = "samsung,exynos5250-dw-mshc", .value = 0 }, { .compat = "samsung,exynos5420-dw-mshc-smu", .value = 1 }, { .compat = "samsung,exynos5420-dw-mshc", .value = 0 }, DEVICE_COMPAT_EOL }; static int exynos_dwcmmc_match(device_t parent, cfdata_t cf, void *aux) { struct fdt_attach_args * const faa = aux; return of_compatible_match(faa->faa_phandle, compat_data); } static void exynos_dwcmmc_attach(device_t parent, device_t self, void *aux) { struct exynos_dwcmmc_softc *esc = device_private(self); struct dwc_mmc_softc *sc = &esc->sc; struct fdt_attach_args * const faa = aux; const struct device_compatible_entry *dce; const int phandle = faa->faa_phandle; char intrstr[128]; bus_addr_t addr; bus_size_t size; int error; if (fdtbus_get_reg(phandle, 0, &addr, &size) != 0) { aprint_error(": couldn't get registers\n"); return; } if (of_getprop_uint32(phandle, "samsung,dw-mshc-ciu-div", &esc->sc_ciu_div)) { aprint_error(": missing samsung,dw-mshc-ciu-div property\n"); return; } esc->sc_clk_biu = fdtbus_clock_get(phandle, "biu"); if (esc->sc_clk_biu == NULL) { aprint_error(": couldn't get clock biu\n"); return; } esc->sc_clk_ciu = fdtbus_clock_get(phandle, "ciu"); if (esc->sc_clk_ciu == NULL) { aprint_error(": couldn't get clock ciu\n"); return; } error = clk_enable(esc->sc_clk_biu); if (error) { aprint_error(": couldn't enable clock biu: %d\n", error); return; } error = clk_enable(esc->sc_clk_ciu); if (error) { aprint_error(": couldn't enable clock ciu: %d\n", error); return; } dce = of_compatible_lookup(faa->faa_phandle, compat_data); KASSERT(dce != NULL); sc->sc_dev = self; sc->sc_bst = faa->faa_bst; sc->sc_dmat = faa->faa_dmat; sc->sc_intr_cardmask = DWC_MMC_INT_SDIO_INT(8); error = bus_space_map(sc->sc_bst, addr, size, 0, &sc->sc_bsh); if (error) { aprint_error(": couldn't map %#" PRIxBUSADDR ": %d\n", addr, error); return; } sc->sc_clock_freq = clk_get_rate(esc->sc_clk_ciu) / (esc->sc_ciu_div + 1); of_getprop_uint32(phandle, "fifo-depth", &sc->sc_fifo_depth); sc->sc_flags = DWC_MMC_F_DMA; sc->sc_bus_clock = exynos_dwcmmc_bus_clock; esc->sc_pin_cd = fdtbus_gpio_acquire(phandle, "cd-gpios", GPIO_PIN_INPUT); if (esc->sc_pin_cd) sc->sc_card_detect = exynos_dwcmmc_card_detect; aprint_naive("\n"); aprint_normal(": MHS (%u Hz)\n", sc->sc_clock_freq); if (!fdtbus_intr_str(phandle, 0, intrstr, sizeof(intrstr))) { aprint_error_dev(self, "failed to decode interrupt\n"); return; } if (dwc_mmc_init(sc) != 0) return; sc->sc_ih = fdtbus_intr_establish_xname(phandle, 0, IPL_BIO, 0, dwc_mmc_intr, sc, device_xname(self)); if (sc->sc_ih == NULL) { aprint_error_dev(self, "couldn't establish interrupt on %s\n", intrstr); return; } aprint_normal_dev(self, "interrupting on %s\n", intrstr); /* Disable encryption mode */ if (dce->value != 0) { bus_space_write_4(sc->sc_bst, sc->sc_bsh, MPS_BEGIN, 0); bus_space_write_4(sc->sc_bst, sc->sc_bsh, MPS_END, ~0U); bus_space_write_4(sc->sc_bst, sc->sc_bsh, MPS_CTRL, MPS_CTRL_NON_SECURE_READ | MPS_CTRL_NON_SECURE_WRITE | MPS_CTRL_SECURE_WRITE | MPS_CTRL_VALID); } } static int exynos_dwcmmc_card_detect(struct dwc_mmc_softc *sc) { struct exynos_dwcmmc_softc *esc = device_private(sc->sc_dev); KASSERT(esc->sc_pin_cd != NULL); return fdtbus_gpio_read(esc->sc_pin_cd); } static int exynos_dwcmmc_bus_clock(struct dwc_mmc_softc *sc, int rate) { struct exynos_dwcmmc_softc *esc = device_private(sc->sc_dev); const int ciu_div = esc->sc_ciu_div + 1; int error; error = clk_set_rate(esc->sc_clk_ciu, 1000 * rate * ciu_div); if (error != 0) { aprint_error_dev(sc->sc_dev, "failed to set rate to %u Hz: %d\n", rate * ciu_div * 1000, error); return error; } sc->sc_clock_freq = clk_get_rate(esc->sc_clk_ciu) / ciu_div; aprint_debug_dev(sc->sc_dev, "set clock rate to %u Hz (target %u Hz)\n", sc->sc_clock_freq, rate * 1000); return 0; }