# $NetBSD: INSTALL,v 1.87 2020/09/27 13:48:49 roy Exp $ # # INSTALL -- NetBSD/acorn32 install configuration # # This machine description file is used to generate the default NetBSD # kernel. The generic kernel does not include all options, subsystems # and device drivers, but should be useful for most applications. # # The machine description file can be customised for your specific # machine to reduce the kernel size and improve its performance. # # For further information on compiling NetBSD kernels, see the config(8) # man page. # # For further information on hardware support for this architecture, see # the intro(4) man page. For further information about kernel options # for this architecture, see the options(4) man page. For an explanation # of each device driver in this file see the section 4 man page for the # device. include "arch/acorn32/conf/std.acorn32" #options INCLUDE_CONFIG_FILE # embed config file in kernel binary #ident "INSTALL-$Revision: 1.87 $" # estimated number of users maxusers 32 # Standard system options options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT #options NTP # NTP phase/frequency locked loop # CPU options options CPU_SA110 # Support the SA110 core options CPU_ARM6 # Support the ARM6 core options CPU_ARM7 # Support the ARM7 core #options CPU_ARM8 # Support the ARM8 core #options ARM6_LATE_ABORT # ARM6XX late abort support # For StrongARM only kernels #makeoptions COPTS="-O2 -mtune=strongarm" # File systems file-system FFS # UFS #file-system LFS # log-structured file system #file-system MFS # memory file system file-system NFS # Network file system #file-system ADOSFS # AmigaDOS-compatible file system #file-system EXT2FS # second extended file system (linux) file-system CD9660 # ISO 9660 + Rock Ridge file system file-system MSDOSFS # MS-DOS file system #file-system FDESC # /dev/fd file-system FILECORE # Acorn filecore file system file-system KERNFS # /kern #file-system NULLFS # loopback file system #file-system OVERLAY # overlay filesystem #file-system PROCFS # /proc #file-system UMAPFS # NULLFS + uid and gid remapping #file-system UNION # union file system file-system PTYFS # /dev/pts/N support # File system options #options QUOTA # legacy UFS quotas #options QUOTA2 # new, in-filesystem UFS quotas #options FFS_EI # FFS Endian Independent support options WAPBL # File system journaling support #options NFSSERVER options FFS_NO_SNAPSHOT # No FFS snapshot support # Networking options #options GATEWAY # packet forwarding options INET # IP + ICMP + TCP + UDP #options INET6 # IPV6 #options IPSEC # IP security #options IPSEC_DEBUG # debug for IP security #options MROUTING # IP multicast routing #options PIM # Protocol Independent Multicast #options NETATALK # AppleTalk networking #options PPP_BSDCOMP # BSD-Compress compression support for PPP #options PPP_DEFLATE # Deflate compression support for PPP #options PPP_FILTER # Active filter support for PPP (requires bpf) #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG # Compatibility options include "conf/compat_netbsd13.config" # Shared memory options #options SYSVMSG # System V-like message queues #options SYSVSEM # System V-like semaphores #options SEMMNI=10 # number of semaphore identifiers #options SEMMNS=60 # number of semaphores in system #options SEMUME=10 # max number of undo entries per process #options SEMMNU=30 # number of undo structures in system #options SYSVSHM # System V-like memory sharing # Device options options MEMORY_DISK_HOOKS # boottime setup of ramdisk options MEMORY_DISK_ROOT_SIZE=5800 # Size in blocks options MEMORY_DISK_IS_ROOT # use memory disk as root options MEMORY_DISK_RBFLAGS=RB_SINGLE # boot in single-user mode # Miscellaneous kernel options #options KTRACE # system call tracing, a la ktrace(1) #options IRQSTATS # manage IRQ statistics #options SCSIVERBOSE # Verbose SCSI errors options USERCONF # userconf(4) support options PIPE_SOCKETPAIR # smaller, but slower pipe(2) #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel # Development and Debugging options #options ARM700BUGTRACK # track the ARM700 swi bug #options PORTMASTER # Enable PortMaster only options options DIAGNOSTIC # internal consistency checks #options UVMHIST # kernhist for uvm/pmap subsystems options DDB # in-kernel debugger pseudo-device ksyms #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB #makeoptions DEBUG="-g" # compile full symbol table config netbsd root on ? type ffs # serial console ... the conaddr is hardcoded as the pioc address + 4*com offset # this really be fixed some day #options COMCONSOLE,CONADDR="0x210000+4*0x3f8",CONUNIT=0,CONSPEED=9600 # The main bus device mainbus0 at root # The boot CPU cpu0 at mainbus? # The IOMD iomd0 at mainbus? # system clock via IOMD clock* at iomd? # IIC bus device iomdiic* at iomd? iic0 at iomdiic? # RTC device via IIC bus pcfrtc* at iic? addr 0x50 # VIDC device vidc0 at mainbus? # WSCONS # ws console uses DUMB, SUN or VT100 terminal emulation #options WSEMUL_NODUMB #options WSEMUL_SUN options WSEMUL_VT100 #options WSDISPLAY_COMPAT_RAWKBD #options WSDISPLAY_COMPAT_USL # wsconscfg VT handling #options FONT_BOLD8x16 #options FONT_GALLANT12x22 # Very nice font #options FONT_LUCIDA16x29 #options FONT_OMRON12x20 # looks funny #options FONT_QVSS8x15 # broken ? options FONT_SONY12x25 # looks like VT220 font #options FONT_SONY8x16 # not tested #options FONT_VT220L8x8 # 8x8 font as in Arch. cons #options FONT_VT220L8x16 # 8x(2x8) font as in Arch. cons #options FONT_VT220L8x10 # not tested #options FONT_VT220L8x20 # not tested vidcvideo0 at vidc? # wscons driver for VIDC wsdisplay* at vidcvideo? console ? # display itself iomdkbc* at iomd? # IOMD keyboard/mouse interface pckbd* at iomdkbc? slot ? # PS/2 keyboard options PCKBD_LAYOUT=KB_UK wskbd* at pckbd? pms* at iomdkbc? slot ? # PS/2 mouse wsmouse* at pms? qms* at iomd? # ws quadmouse driver wsmouse* at qms? # wsmouse on ws quadmouse pseudo-device wsmux # Peripheral IO Controller pioc0 at mainbus? base 0x00210000 # IDE disk controller wdc0 at pioc? offset 0x01f0 irq 9 #wdc* at pioc? offset 0x0170 irq -1 # ATA (IDE) bus support atabus* at ata? wd* at atabus? drive ? atapibus* at atapi? cd* at atapibus? drive ? sd* at atapibus? drive ? # Floppy disk controller fdc* at pioc? offset 0x03f0 irq 12 dack 0x2000 fdc* at pioc? offset 0x0370 irq -1 dack 0x2000 fd0 at fdc? drive ? # Serial ports com* at pioc? offset 0x03f8 irq 10 #com* at pioc? offset 0x02f8 irq -1 #com* at pioc? offset 0x0338 irq -1 #com* at pioc? offset 0x0238 irq -1 # Parallel ports lpt* at pioc? offset 0x0278 irq 0 #lpt* at pioc? offset 0x0378 irq -1 #lpt* at pioc? offset 0x03bc irq -1 # Audio device vidcaudio0 at vidc? audio* at vidcaudio0 spkr* at audio? # PC speaker (synthesized) # Podule bus device podulebus0 at root sec* at podulebus? # Acorn SCSI card scsibus* at sec? cosc* at podulebus? # MCS Connect32 SCSI II card scsibus* at cosc? ptsc* at podulebus? # Power-Tec SCSI II card scsibus* at ptsc? csc* at podulebus? # Cumana SCSI II card scsibus* at csc? oak* at podulebus? # Oak SCSI I card scsibus* at oak? csa* at podulebus? # Cumana SCSI I adapter scsibus* at csa? hcsc* at podulebus0 slot ? # HCCS 8-bit SCSI interface scsibus* at hcsc? sd* at scsibus? target ? lun ? # SCSI disk drives st* at scsibus? target ? lun ? # SCSI tape drives cd* at scsibus? target ? lun ? # SCSI CD-ROM drives #ch* at scsibus? target ? lun ? # SCSI auto-changers #uk* at scsibus? target ? lun ? # SCSI unknown device #ss* at scsibus? target ? lun ? # SCSI scanner dtide* at podulebus? # D.T. Software IDE card hcide* at podulebus? # HCCS IDE card icside* at podulebus? # ICS IDE card rapide* at podulebus? # Yellowstone RapIDE card simide* at podulebus? # Simtec IDE card amps* at podulebus? # Atomwide Multi-Port Serial card com* at amps? ei* at podulebus? # Ether1 podules ea* at podulebus? # Ether3 podules eb0 at podulebus? # EtherB network slot cards ne* at podulebus? # NE2000 clone cards pseudo-device loop # network loopback #pseudo-device bpfilter # packet filter #pseudo-device sl # CSLIP #pseudo-device ppp # PPP #pseudo-device pppoe # PPP over Ethernet (RFC 2516) #pseudo-device tun # network tunneling over tty #pseudo-device tap # virtual Ethernet #pseudo-device gre # generic L3 over IP tunnel #pseudo-device npf # NPF packet filter #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) #pseudo-device faith # IPv[46] tcp relay translation i/f #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation #pseudo-device vlan # IEEE 802.1q encapsulation #pseudo-device bridge # simple inter-network bridging #pseudo-device vether # Virtual Ethernet for bridge pseudo-device pty # pseudo-terminals pseudo-device vnd # disk-like interface to files pseudo-device ccd # concatenated disk devices #pseudo-device raid # RAIDframe disk driver #options RAID_AUTOCONFIG # auto-configuration of RAID components # Options to enable various other RAIDframe RAID types. # options RF_INCLUDE_EVENODD=1 # options RF_INCLUDE_RAID5_RS=1 # options RF_INCLUDE_PARITYLOGGING=1 # options RF_INCLUDE_CHAINDECLUSTER=1 # options RF_INCLUDE_INTERDECLUSTER=1 # options RF_INCLUDE_PARITY_DECLUSTERING=1 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 #pseudo-device fss # file system snapshot device pseudo-device md # Ramdisk driver # If the standard modes don't work for your monitor, you can specify # a RISC-OS-format monitor definition file and a list of modes here. #makeoptions MONITOR="Taxan875+LR" #makeoptions MONITOR="AKF60" #makeoptions MODES="1024,768,60 1024,768,70 800,600,60 640,480,60 1280,1024 1152,900"