.\" $NetBSD: route.4,v 1.34 2021/08/17 22:00:26 andvar Exp $ .\" .\" Copyright (c) 1990, 1991, 1993 .\" The Regents of the University of California. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" 3. Neither the name of the University nor the names of its contributors .\" may be used to endorse or promote products derived from this software .\" without specific prior written permission. .\" .\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND .\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE .\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE .\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE .\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL .\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS .\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) .\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT .\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF .\" SUCH DAMAGE. .\" .\" @(#)route.4 8.6 (Berkeley) 4/19/94 .\" .Dd February 4, 2020 .Dt ROUTE 4 .Os .Sh NAME .Nm route .Nd kernel packet forwarding database .Sh SYNOPSIS .In sys/socket.h .In net/if.h .In net/route.h .Ft int .Fn socket PF_ROUTE SOCK_RAW "int family" .Sh DESCRIPTION .Ux provides some packet routing facilities. The kernel maintains a routing information database, which is used in selecting the appropriate network interface when transmitting packets. .Pp A user process (or possibly multiple co-operating processes) maintains this database by sending messages over a special kind of socket. This supplants fixed size .Xr ioctl 2 Ns 's used in earlier releases. Routing table changes may only be carried out by the super user. .Pp The operating system may spontaneously emit routing messages in response to external events, such as receipt of a redirect, or failure to locate a suitable route for a request. The message types are described in greater detail below. .Pp Routing database entries come in two flavors: for a specific host, or for all hosts on a generic subnetwork (as specified by a bit mask and value under the mask. The effect of wildcard or default route may be achieved by using a mask of all zeros, and there may be hierarchical routes. .Pp When the system is booted and addresses are assigned to the network interfaces, each protocol family installs a routing table entry for each interface when it is ready for traffic. Normally the protocol specifies the route through each interface as a .Dq direct connection to the destination host or network. If the route is direct, the transport layer of a protocol family usually requests the packet be sent to the same host specified in the packet. Otherwise, the interface is requested to address the packet to the gateway listed in the routing entry (i.e. the packet is forwarded). .Pp When routing a packet, the kernel will attempt to find the most specific route matching the destination. (If there are two different mask and value-under-the-mask pairs that match, the more specific is the one with more bits in the mask. A route to a host is regarded as being supplied with a mask of as many ones as there are bits in the destination). If no entry is found, the destination is declared to be unreachable, and a routing\-miss message is generated if there are any listeners on the routing control socket described below. .Pp A wildcard routing entry is specified with a zero destination address value, and a mask of all zeroes. Wildcard routes will be used when the system fails to find other routes matching the destination. The combination of wildcard routes and routing redirects can provide an economical mechanism for routing traffic. .Pp One opens the channel for passing routing control messages by using the socket call shown in the synopsis above: .Pp The .Fa family parameter may be .Dv AF_UNSPEC which will provide routing information for all address families, or can be restricted to a specific address family by specifying which one is desired. There can be more than one routing socket open per system. .Pp Messages are formed by a header followed by a small number of sockaddrs (now variable length particularly in the .Tn ISO case), interpreted by position, and delimited by the new length entry in the sockaddr. An example of a message with four addresses might be an .Tn ISO redirect: Destination, Netmask, Gateway, and Author of the redirect. The interpretation of which address are present is given by a bit mask within the header, and the sequence is least significant to most significant bit within the vector. .Pp Any messages sent to the kernel are returned, and copies are sent to all interested listeners. The exception to this is a new address marked as tentative, where copies will be sent once Duplicate Address Detection has completed and the tentative flag cleared or the duplicated flag set. Also, new address messages will also be emitted when other flags on the address change such as deprecated and detached. The kernel will provide the process ID for the sender, and the sender may use an additional sequence field to distinguish between outstanding messages. However, message replies may be lost when kernel buffers are exhausted. .Pp The kernel may reject certain messages, and will indicate this by filling in the .Fa rtm_errno field. The routing code returns .Er EEXIST if requested to duplicate an existing entry, .Er ESRCH if requested to delete a non-existent entry, or .Er ENOBUFS if insufficient resources were available to install a new route. In the current implementation, all routing processes run locally, and the values for .Fa rtm_errno are available through the normal .Em errno mechanism, even if the routing reply message is lost. .Pp A process may avoid the expense of reading replies to its own messages by issuing a .Xr setsockopt 2 call indicating that the .Dv SO_USELOOPBACK option at the .Dv SOL_SOCKET level is to be turned off. A process may ignore all messages from the routing socket by doing a .Xr shutdown 2 system call for further input. .Pp A process can specify which route message types it's interested in by passing an array of route message types to the .Xr setsockopt 2 call with the .Dv RO_MSGFILTER option at the .Dv PF_ROUTE level. For example, to only get specific messages: .Bd -literal -offset indent unsigned char rtfilter[] = { RTM_IFINFO, RTM_IFANNOUNCE }; if (setsockopt(routefd, PF_ROUTE, RO_MSGFILTER, &rtfilter, (socklen_t)sizeof(rtfilter)) == -1) err(1, "setsockopt(RO_MSGFILTER)"); .Ed .Pp A process can specify which RTM_MISS destination addresses it's interested in by passing an array of struct sockaddr to the .Xr setsockopt 2 call with the .Dv RO_MISSFILTER option at the .Dv PF_ROUTE level. For example, to only get RTM_MISS messages for specific destinations: .Bd -literal -offset indent char buf[1024] = { '\\0' }, *cp = buf; struct sockaddr_in sin = { .sin_family = AF_INET, .sin_len = sizeof(sin), }; inet_aton("192.168.0.1", &sin.sin_addr); memcpy(cp, &sin, sin.sin_len); cp += RT_ROUNDUP(sin.sin_len); inet_aton("192.168.0.2", &sin.sin_addr); memcpy(cp, &sin, sin.sin_len); cp += RT_ROUNDUP(sin.sin_len); if (setsockopt(routefd, PF_ROUTE, RO_MISSFILTER, &sin, (socklen_t)(cp - buf)) == -1) err(1, "setsockopt(RO_MISSFILTER)"); .Ed .Pp If a route is in use when it is deleted, the routing entry will be marked down and removed from the routing table, but the resources associated with it will not be reclaimed until all references to it are released. User processes can obtain information about the routing entry to a specific destination by using a .Dv RTM_GET message, or by reading the .Pa /dev/kmem device, or by calling .Xr sysctl 3 . .Pp The messages are: .Bd -literal #define RTM_ADD 0x1 /* Add Route */ #define RTM_DELETE 0x2 /* Delete Route */ #define RTM_CHANGE 0x3 /* Change Metrics, Flags, or Gateway */ #define RTM_GET 0x4 /* Report Information */ #define RTM_LOSING 0x5 /* Kernel Suspects Partitioning */ #define RTM_REDIRECT 0x6 /* Told to use different route */ #define RTM_MISS 0x7 /* Lookup failed on this address */ #define RTM_LOCK 0x8 /* fix specified metrics */ #define RTM_OLDADD 0x9 /* caused by SIOCADDRT */ #define RTM_OLDDEL 0xa /* caused by SIOCDELRT */ #define RTM_ONEWADDR 0xc /* Old (pre-8.0) RTM_NEWADDR message */ // #define RTM_RESOLVE 0xb /* req to resolve dst to LL addr */ #define RTM_ODELADDR 0xd /* Old (pre-8.0) RTM_DELADDR message */ #define RTM_OOIFINFO 0xe /* Old (pre-1.5) RTM_IFINFO message */ #define RTM_OIFINFO 0xf /* Old (pre-6.0) RTM_IFINFO message */ #define RTM_IFANNOUNCE 0x10 /* iface arrival/departure */ #define RTM_IEEE80211 0x11 /* IEEE80211 wireless event */ #define RTM_SETGATE 0x12 /* set prototype gateway for clones * (see example in arp_rtrequest). */ #define RTM_LLINFO_UPD 0x13 /* indication to ARP/NDP/etc. that link-layer * address has changed */ #define RTM_IFINFO 0x14 /* iface/link going up/down etc. */ #define RTM_OCHGADDR 0x15 /* Old (pre-8.0) RTM_CHGADDR message */ #define RTM_NEWADDR 0x16 /* address being added to iface */ #define RTM_DELADDR 0x17 /* address being removed from iface */ #define RTM_CHGADDR 0x18 /* address properties changed */ .Ed .Pp A message header consists of one of the following: .Bd -literal struct rt_msghdr { u_short rtm_msglen; /* to skip over non-understood messages */ u_char rtm_version; /* future binary compatibility */ u_char rtm_type; /* message type */ u_short rtm_index; /* index for associated ifp */ int rtm_flags; /* flags, incl kern & message, e.g. DONE */ int rtm_addrs; /* bitmask identifying sockaddrs in msg */ pid_t rtm_pid; /* identify sender */ int rtm_seq; /* for sender to identify action */ int rtm_errno; /* why failed */ int rtm_use; /* from rtentry */ u_long rtm_inits; /* which metrics we are initializing */ struct rt_metrics rtm_rmx; /* metrics themselves */ }; struct if_msghdr { u_short ifm_msglen; /* to skip over non-understood messages */ u_char ifm_version; /* future binary compatibility */ u_char ifm_type; /* message type */ int ifm_addrs; /* like rtm_addrs */ int ifm_flags; /* value of if_flags */ u_short ifm_index; /* index for associated ifp */ struct if_data ifm_data; /* statistics and other data about if */ }; struct ifa_msghdr { u_short ifam_msglen; /* to skip over non-understood messages */ u_char ifam_version; /* future binary compatibility */ u_char ifam_type; /* message type */ u_short ifam_index; /* index for associated ifp */ int ifam_flags; /* value of ifa_flags */ int ifam_addrs; /* like rtm_addrs */ pid_t ifam_pid; /* identify sender */ int ifam_addrflags; /* family specific address flags */ int ifam_metric; /* value of ifa_metric */ }; struct if_announcemsghdr { u_short ifan_msglen; /* to skip over non-understood messages */ u_char ifan_version; /* future binary compatibility */ u_char ifan_type; /* message type */ u_short ifan_index; /* index for associated ifp */ char ifan_name[IFNAMSIZ]; /* if name, e.g. "en0" */ u_short ifan_what; /* what type of announcement */ }; .Ed .Pp The .Dv RTM_IFINFO message uses a .Vt if_msghdr header, the .Dv RTM_NEWADDR , .Dv RTM_CHGADDR , and .Dv RTM_DELADDR messages use a .Vt ifa_msghdr header, the .Dv RTM_IFANNOUNCE message uses a .Vt if_announcemsghdr header, and all other messages use the .Vt rt_msghdr header. .Pp The metrics structure is: .Bd -literal struct rt_metrics { u_long rmx_locks; /* Kernel must leave these values alone */ u_long rmx_mtu; /* MTU for this path */ u_long rmx_hopcount; /* max hops expected */ u_long rmx_expire; /* lifetime for route, e.g. redirect */ u_long rmx_recvpipe; /* inbound delay-bandwidth product */ u_long rmx_sendpipe; /* outbound delay-bandwidth product */ u_long rmx_ssthresh; /* outbound gateway buffer limit */ u_long rmx_rtt; /* estimated round trip time */ u_long rmx_rttvar; /* estimated rtt variance */ u_long rmx_pksent; /* packets sent using this route */ }; .Ed .Pp Flags include the values: .Bd -literal #define RTF_UP 0x1 /* route usable */ #define RTF_GATEWAY 0x2 /* destination is a gateway */ #define RTF_HOST 0x4 /* host entry (net otherwise) */ #define RTF_REJECT 0x8 /* host or net unreachable */ #define RTF_DYNAMIC 0x10 /* created dynamically (by redirect) */ #define RTF_MODIFIED 0x20 /* modified dynamically (by redirect) */ #define RTF_DONE 0x40 /* message confirmed */ #define RTF_MASK 0x80 /* subnet mask present */ #define RTF_CONNECTED 0x100 /* hosts on this route are neighbours */ #define RTF_LLDATA 0x400 /* used by apps to add/del L2 entries */ #define RTF_STATIC 0x800 /* manually added */ #define RTF_BLACKHOLE 0x1000 /* just discard pkts (during updates) */ #define RTF_PROTO2 0x4000 /* protocol specific routing flag */ #define RTF_PROTO1 0x8000 /* protocol specific routing flag */ #define RTF_SRC 0x10000 /* route has fixed source address */ #define RTF_ANNOUNCE 0x20000 /* announce new ARP or NDP entry */ #define RTF_LOCAL 0x40000 /* route represents a local address */ #define RTF_BROADCAST 0x80000 /* route represents a bcast address */ .Ed .Pp Specifiers for metric values in rmx_locks and rtm_inits are: .Bd -literal #define RTV_MTU 0x1 /* init or lock _mtu */ #define RTV_HOPCOUNT 0x2 /* init or lock _hopcount */ #define RTV_EXPIRE 0x4 /* init or lock _expire */ #define RTV_RPIPE 0x8 /* init or lock _recvpipe */ #define RTV_SPIPE 0x10 /* init or lock _sendpipe */ #define RTV_SSTHRESH 0x20 /* init or lock _ssthresh */ #define RTV_RTT 0x40 /* init or lock _rtt */ #define RTV_RTTVAR 0x80 /* init or lock _rttvar */ .Ed .Pp Specifiers for which addresses are present in the messages are: .Bd -literal #define RTA_DST 0x1 /* destination sockaddr present */ #define RTA_GATEWAY 0x2 /* gateway sockaddr present */ #define RTA_NETMASK 0x4 /* netmask sockaddr present */ #define RTA_GENMASK 0x8 /* cloning mask sockaddr present */ #define RTA_IFP 0x10 /* interface name sockaddr present */ #define RTA_IFA 0x20 /* interface addr sockaddr present */ #define RTA_AUTHOR 0x40 /* sockaddr for author of redirect */ #define RTA_BRD 0x80 /* for NEWADDR, broadcast or p-p dest addr */ #define RTA_TAG 0x100 /* route tag */ .Ed .Pp Flags for IPv6 addresses: .Bd -literal #define IN6_IFF_ANYCAST 0x01 /* anycast address */ #define IN6_IFF_TENTATIVE 0x02 /* tentative address */ #define IN6_IFF_DUPLICATED 0x04 /* DAD detected duplicate */ #define IN6_IFF_DETACHED 0x08 /* may be detached from the link */ #define IN6_IFF_DEPRECATED 0x10 /* deprecated address */ #define IN6_IFF_NODAD 0x20 /* don't perform DAD on this address * (used only at first SIOC* call) */ #define IN6_IFF_AUTOCONF 0x40 /* autoconfigurable address. */ #define IN6_IFF_TEMPORARY 0x80 /* temporary (anonymous) address. */ .Ed .Sh SEE ALSO .Xr socket 2 , .Xr sysctl 3 .Sh HISTORY Since .Nx 8.0 , .Cm RTF_CLONED , .Cm RTF_CLONING , .Cm RTF_LLINFO , .Cm RTF_XRESOLVE and .Cm RTM_RESOLVE were obsolete. .Cm RTF_CONNECTED and .Cm RTF_LLDATA appeared in .Nx 8.0 . .Pp .Vt ifa_msghdr gained the fields ifam_pid and ifam_addrflags in .Nx 8.0 .