=> Bootstrap dependency digest>=20010302: found digest-20160304
WARNING: [license.mk] Every package should define a LICENSE.
===> Skipping vulnerability checks.
WARNING: No /var/db/pkg/pkg-vulnerabilities file found.
WARNING: To fix run: `/usr/sbin/pkg_admin -K /var/db/pkg fetch-pkg-vulnerabilities'.
=> Checksum SHA1 OK for jabber-1.4.2.tar.gz
=> Checksum RMD160 OK for jabber-1.4.2.tar.gz
=> Checksum SHA512 OK for jabber-1.4.2.tar.gz
===> Installing dependencies for jabberd-1.4.2nb13
==========================================================================
The supported build options for jabberd are:

	inet6

The currently selected options are:

	inet6

You can select which build options to use by setting PKG_DEFAULT_OPTIONS
or the following variable.  Its current value is shown:

	PKG_OPTIONS.jabberd (not defined)

==========================================================================
==========================================================================
The following variables will affect the build process of this package,
jabberd-1.4.2nb13.  Their current value is shown below:

        * JABBERD_LOGDIR = /var/log/jabberd
        * JABBERD_PIDDIR = /var/run/jabberd
        * JABBERD_SPOOLDIR = /var/spool/jabberd
        * SSLBASE = /usr
        * SSLCERTS = /etc/openssl/certs
        * SSLDIR = /etc/openssl
        * SSLKEYS = /etc/openssl/private

You may want to abort the process now with CTRL-C and change their value
before continuing.  Be sure to run `/usr/bin/make clean' after
the changes.
==========================================================================
=> Tool dependency gmake>=3.81: found gmake-4.1nb4
=> Tool dependency checkperms>=1.1: found checkperms-1.12
=> Build dependency cwrappers>=20150314: found cwrappers-20180325
===> Overriding tools for jabberd-1.4.2nb13
===> Extracting for jabberd-1.4.2nb13
===> Patching for jabberd-1.4.2nb13
=> Applying pkgsrc patches for jabberd-1.4.2nb13
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-aa
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-aa
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-aa,v 1.5 2008/08/03 05:17:40 obache Exp $
|
|--- configure.orig	2002-02-11 19:14:06.000000000 +0000
|+++ configure
--------------------------
Patching file configure using Plan A...
Hunk #1 succeeded at 32.
Hunk #2 succeeded at 46.
Hunk #3 succeeded at 77.
Hunk #4 succeeded at 112.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-ab
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-ab
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-ab,v 1.2 2004/02/21 05:38:29 xtraeme Exp $
|
|--- jabber.xml.in.orig	Tue May 15 17:21:56 2001
|+++ jabber.xml.in	Sat Feb 14 02:06:11 2004
--------------------------
Patching file jabber.xml.in using Plan A...
Hunk #1 succeeded at 264.
Hunk #2 succeeded at 295.
Hunk #3 succeeded at 319.
Hunk #4 succeeded at 359.
Hunk #5 succeeded at 372.
Hunk #6 succeeded at 382.
Hunk #7 succeeded at 401.
Hunk #8 succeeded at 596.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-ac
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-ac
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-ac,v 1.2 2004/02/21 05:38:29 xtraeme Exp $
|
|--- jabberd/jabberd.c.orig	2003-12-19 12:17:00.000000000 +0000
|+++ jabberd/jabberd.c	2003-12-19 12:17:52.000000000 +0000
--------------------------
Patching file jabberd/jabberd.c using Plan A...
Hunk #1 succeeded at 199.
Hunk #2 succeeded at 225.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-ad
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-ad
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-ad,v 1.4 2010/05/04 18:33:35 gdt Exp $
|
|--- jabberd/mio_ssl.c.orig	2002-02-08 07:39:27.000000000 +0000
|+++ jabberd/mio_ssl.c
--------------------------
Patching file jabberd/mio_ssl.c using Plan A...
Hunk #1 succeeded at 63.
Hunk #2 succeeded at 220.
Hunk #3 succeeded at 236.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-jabberd_base_base__accept.c
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-jabberd_base_base__accept.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-jabberd_base_base__accept.c,v 1.1 2012/11/16 00:34:35 joerg Exp $
|
|--- jabberd/base/base_accept.c.orig	2012-11-15 15:40:49.000000000 +0000
|+++ jabberd/base/base_accept.c
--------------------------
Patching file jabberd/base/base_accept.c using Plan A...
Hunk #1 succeeded at 64.
Hunk #2 succeeded at 157.
Hunk #3 succeeded at 358.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-jabberd_lib_xstream.c
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-jabberd_lib_xstream.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-jabberd_lib_xstream.c,v 1.1 2011/07/03 08:26:55 obache Exp $
|
|* fix CVE-2011-1754
|
|--- jabberd/lib/xstream.c.orig	2002-02-08 07:39:24.000000000 +0000
|+++ jabberd/lib/xstream.c
--------------------------
Patching file jabberd/lib/xstream.c using Plan A...
Hunk #1 succeeded at 142.
done
=> Verifying /data/pkgsrc/chat/jabberd/patches/patch-jabberd_mio__xml.c
=> Applying pkgsrc patch /data/pkgsrc/chat/jabberd/patches/patch-jabberd_mio__xml.c
Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|$NetBSD: patch-jabberd_mio__xml.c,v 1.1 2011/07/03 08:26:55 obache Exp $
|
|* fix CVE-2011-1754
|
|--- jabberd/mio_xml.c.orig	2002-02-08 07:39:27.000000000 +0000
|+++ jabberd/mio_xml.c
--------------------------
Patching file jabberd/mio_xml.c using Plan A...
Hunk #1 succeeded at 118.
done
===> Creating toolchain wrappers for jabberd-1.4.2nb13
===> Configuring for jabberd-1.4.2nb13
=> Replacing config-guess with pkgsrc versions
=> Replacing config-sub with pkgsrc versions
=> Checking for portability problems in extracted files
cat: .wrksrc-freebsd: No such file or directory
Running Jabber Configure
========================

Searching for SSL...            Found.
Using jabber's internal copy of pth 1.4.0 because 1.4.1 is incompatible
Configuring jabber pth-1.4.0...
Configuring GNU Pth (Portable Threads), Version 1.4.0 (24-Mar-2001)
Copyright (c) 1999-2001 Ralf S. Engelschall <rse@engelschall.com>
creating cache ./config.cache
Platform: x86_64-unknown-netbsd8.99

Build Tools:
checking for gcc... clang
checking whether the C compiler (clang -O2 -I/usr/include -g -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib) works... yes
checking whether the C compiler (clang -O2 -I/usr/include -g -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib) is a cross-compiler... no
checking whether we are using GNU C... yes
checking whether clang accepts -g... yes
checking how to run the C preprocessor... clang -E
checking whether make sets ${MAKE}... yes
checking for compiler option -pipe... yes
checking for compilation debug mode... disabled
checking for compilation profile mode... disabled
checking for compilation optimization mode... disabled
checking for ranlib... ranlib
checking for object suffix... o
checking for executable suffix... no
checking for clang option to produce PIC... -fPIC
checking if clang PIC flag -fPIC works... yes
checking if clang supports -c -o file.o... yes
checking if clang supports -c -o file.lo... yes
checking if clang supports -fno-rtti -fno-exceptions ... yes
checking if clang static flag -static works... -static
checking whether ln -s works... yes
checking for ld used by GCC... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the linker (/usr/bin/ld) supports shared libraries... yes
checking for BSD-compatible nm... /usr/bin/nm -B
checking command to parse /usr/bin/nm -B output... ok
checking how to hardcode library paths into programs... immediate
checking for /usr/bin/ld option to reload object files... -r
checking dynamic linker characteristics... NetBSD ld.elf_so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for objdir... .libs
creating libtool

Mandatory Platform Environment:
checking for ANSI C header files... yes
checking for stdio.h... yes
checking for stdlib.h... yes
checking for stdarg.h... yes
checking for string.h... yes
checking for signal.h... yes
checking for unistd.h... yes
checking for setjmp.h... yes
checking for fcntl.h... yes
checking for errno.h... yes
checking for sys/types.h... yes
checking for sys/time.h... yes
checking for sys/wait.h... yes
checking for sys/stat.h... yes
checking for sys/socket.h... yes
checking for function gettimeofday... yes
checking for function select... yes
checking for function sigaction... yes
checking for function sigprocmask... yes
checking for function sigpending... yes
checking for function sigsuspend... yes
decision on mandatory system headers and functions... all fine

Optional Platform Environment:
checking for number of signals... 64
checking for function poll... yes
checking for define POLLIN in poll.h... yes
checking whether poll(2) facility has to be faked... no
checking for sys/uio.h... yes
checking for function readv... yes
checking for function writev... yes
checking whether readv(2)/writev(2) facility has to be faked... no
checking for function usleep... yes
checking for function strerror... yes
checking for sys/resource.h... yes
checking for net/errno.h... no
checking for paths.h... yes
checking for gethostname in -lnsl... no
checking for gethostbyname in -lnsl... no
checking for accept in -lsocket... no
checking for sys/select.h... yes
checking for typedef sig_atomic_t... yes
checking for typedef pid_t... yes
checking for typedef size_t... yes
checking for typedef ssize_t... yes
checking for typedef off_t... yes
checking for typedef stack_t... yes
checking for attribute ss_base in struct sigaltstack from sys/signal.h... no
checking for attribute ss_sp in struct sigaltstack from sys/signal.h... yes
checking for a single-argument based gettimeofday... no
checking for struct timespec... yes
checking for typedef socklen_t... yes
checking for type of argument 3 for accept()... __socklen_t *
checking for fallback socklen_t... socklen_t
checking for typedef nfds_t... yes
checking for type of argument 2 for poll()... nfds_t
checking for fallback nfds_t... nfds_t
checking for built-in type long long... yes
checking for built-in type long double... yes

Machine Context Implementation:
checking for ucontext.h... yes
checking for function makecontext... yes
checking for function swapcontext... yes
checking for function getcontext... yes
checking for function setcontext... yes
checking for usable SVR4/SUSv2 makecontext(2)/swapcontext(2)... yes
checking for signal.h... (cached) yes
checking for function sigsetjmp... no
checking for function siglongjmp... no
checking for function setjmp... no
checking for function longjmp... no
checking for function _setjmp... yes
checking for function _longjmp... yes
checking for function sigaltstack... yes
checking for function sigstack... no
checking for signal-mask aware setjmp(3)/longjmp(3)... yes: ssjlj
checking for typedef stack_t... (cached) yes
checking for direction of stack growth... down
checking for function makecontext... (cached) yes
checking for stack setup via makecontext... ok
checking for function sigaltstack... (cached) yes
checking for typedef stack_t... (cached) yes
checking for stack setup via sigaltstack... ok
checking for function sigstack... (cached) no
checking for stack setup via sigstack... N.A.
decision on mctx implementation... mcsc/sc/mc

System Call Mapping:
checking for function syscall... yes
checking for sys/syscall.h... yes
checking for sys/socketcall.h... no
checking for define SYS_read in sys/syscall.h... yes
checking whether soft system call mapping is used... no
checking whether hard system call mapping is used... no

Build Parameters:
checking whether to activate batch build mode... no
checking whether to activate maintainer build targets... no
checking whether to activate test build targets... yes
checking whether to build Pthread library... no
checking whether to build against Sfio library... no
checking whether to build against Dmalloc library... no

Output Substitution:
updating cache ./config.cache
creating ./config.status
creating Makefile
creating pthread-config
creating pthread.h
creating pth-config
creating pth.h
creating pth_acmac.h
creating pth_acdef.h

Now please type `make' to compile. Good luck.

Building pth-1.4.0...
./shtool scpp -o pth_p.h -t pth_p.h.in -Dcpp -Cintern -M '==#==' pth_compat.c pth_debug.c pth_syscall.c pth_errno.c pth_ring.c pth_mctx.c pth_clean.c pth_time.c pth_tcb.c pth_util.c pth_pqueue.c pth_event.c pth_sched.c pth_data.c pth_msg.c pth_cancel.c pth_sync.c pth_attr.c pth_lib.c pth_fork.c pth_high.c pth_ext.c pth_string.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_debug.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_ring.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_pqueue.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_time.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_errno.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_mctx.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_tcb.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_sched.c
pth_sched.c:84:53: warning: while loop has empty body [-Wempty-body]
    while ((t = pth_pqueue_delmax(&pth_NQ)) != NULL);
                                                    ^
pth_sched.c:84:53: note: put the semicolon on a separate line to silence this warning
pth_sched.c:89:53: warning: while loop has empty body [-Wempty-body]
    while ((t = pth_pqueue_delmax(&pth_RQ)) != NULL);
                                                    ^
pth_sched.c:89:53: note: put the semicolon on a separate line to silence this warning
pth_sched.c:94:53: warning: while loop has empty body [-Wempty-body]
    while ((t = pth_pqueue_delmax(&pth_WQ)) != NULL);
                                                    ^
pth_sched.c:94:53: note: put the semicolon on a separate line to silence this warning
pth_sched.c:99:53: warning: while loop has empty body [-Wempty-body]
    while ((t = pth_pqueue_delmax(&pth_SQ)) != NULL);
                                                    ^
pth_sched.c:99:53: note: put the semicolon on a separate line to silence this warning
pth_sched.c:104:53: warning: while loop has empty body [-Wempty-body]
    while ((t = pth_pqueue_delmax(&pth_DQ)) != NULL);
                                                    ^
pth_sched.c:104:53: note: put the semicolon on a separate line to silence this warning
5 warnings generated.
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_attr.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_lib.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_event.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_data.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_clean.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_cancel.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_msg.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_sync.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_fork.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_util.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_high.c
pth_high.c:630:31: warning: while loop has empty body [-Wempty-body]
           && errno == EINTR) ;
                              ^
pth_high.c:630:31: note: put the semicolon on a separate line to silence this warning
pth_high.c:792:31: warning: while loop has empty body [-Wempty-body]
           && errno == EINTR) ;
                              ^
pth_high.c:792:31: note: put the semicolon on a separate line to silence this warning
pth_high.c:1188:31: warning: while loop has empty body [-Wempty-body]
           && errno == EINTR) ;
                              ^
pth_high.c:1188:31: note: put the semicolon on a separate line to silence this warning
3 warnings generated.
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_syscall.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_ext.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_compat.c
./libtool --mode=compile --quiet clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe pth_string.c
pth_string.c:125:22: warning: shift count >= width of type [-Wshift-count-overflow]
        maxlen = (~(1<<((sizeof(size_t)*8)-2)));
                     ^ ~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
./libtool --mode=link --quiet clang -o libpth.la pth_debug.lo pth_ring.lo pth_pqueue.lo pth_time.lo pth_errno.lo pth_mctx.lo pth_tcb.lo pth_sched.lo pth_attr.lo pth_lib.lo pth_event.lo pth_data.lo pth_clean.lo pth_cancel.lo pth_msg.lo pth_sync.lo pth_fork.lo pth_util.lo pth_high.lo pth_syscall.lo pth_ext.lo pth_compat.lo pth_string.lo \
-rpath /usr/local/lib -version-info `./shtool version -lc -dlibtool pth_vers.c`
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_std.c
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_common.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_std test_std.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_mp.c
test_mp.c:72:33: warning: array subscript is of type 'char' [-Wchar-subscripts]
                 q->string[i] = toupper(q->string[i]);
                                ^~~~~~~~~~~~~~~~~~~~~
/usr/include/sys/ctype_inline.h:60:46: note: expanded from macro 'toupper'
#define toupper(c)      ((int)((_toupper_tab_ + 1)[(c)]))
                                                  ^~~~
1 warning generated.
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_mp test_mp.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_misc.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_misc test_misc.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_philo.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_philo test_philo.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_sig.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_sig test_sig.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_select.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_select test_select.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_httpd.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_httpd test_httpd.o test_common.o libpth.la 
clang -c -Du_int8_t=uint8_t -I/usr/include -I. -O2 -I/usr/include -Wall -I. -I.. -I/usr/include/openssl -DHAVE_SSL -pipe test_sfio.c
./libtool --mode=link --quiet clang -L/usr/lib -Wl,-R/usr/lib -Wl,-R/usr/pkg/lib -L/usr/lib -o test_sfio test_sfio.o test_common.o libpth.la 
make[1]: Entering directory '/data/scratch/chat/jabberd/work/jabber-1.4.2/jabberd/pth-1.4.0'

shtool:echo:Warning: unable to determine terminal sequence for bold mode
Now please type `make test' to run a quick test suite. Hope it works.

make[1]: Leaving directory '/data/scratch/chat/jabberd/work/jabber-1.4.2/jabberd/pth-1.4.0'
Setting Build Parameters...     Done.
Generating Settings Script...   Done.

You may now type 'make' to build your new Jabber system.