# $NetBSD: mk.conf.example,v 1.52 1999/04/24 19:48:23 tron Exp $ # # Sample /etc/mk.conf file, which can be used to set specific values # for building either NetBSD or some of the NetBSD packages collection. # See the NetBSD mk.conf(5) and packages(7) manual page for a full # description of all available options. # # Definitely not complete yet. - agc Fri Mar 27 16:42:38 GMT 1998 # # ************************************************************************ # NOTE TO PEOPLE EDITING THIS FILE - USE LEADING SPACES, NOT LEADING TABS. # ************************************************************************ # # Firstly, definitions for NetBSD and package collection # #MANZ= 1 # gzip manual pages at installation time # Possible: defined, not defined # Default: not defined #OBJMACHINE= 1 # use machine-specific object directories, # e.g. work.i386, work.sparc # Possible: defined, not defined # Default: not defined #WRKOBJDIR= /usr/tmp # build here instead of in pkgsrc # Possible: defined, not defined # Default: not defined #UVM= 1 # Use the new UVM virtual memory subsystem # Possible: defined, not defined # Default: not defined #USETBL= yes # Run raw manual pages through tbl(1) before # piping through troff(1) when formatting # manual pages. # Possible: set, not set # Default: not set # # The following values are used to manage the packages collection as a whole. # #LOCALBASE= /usr/local # Where non-X-based packages will be installed # Possible: any path # Default: /usr/pkg #CROSSBASE= /usr/pkg/cross # Where "cross" category packages install # Possible: any path # Default: ${LOCALBASE}/cross #X11BASE= /usr/X11R6 # Where X11 is installed on the system. # (and the default install path of X11 pkgs) # Possible: any path # Default: /usr/X11R6 #DISTDIR= ${PKGSRCDIR}/distfiles # Directory where original distribution # files are stored. # Possible: any path you like # Default: /usr/pkgsrc/distfiles #PACKAGES= ${PKGSRCDIR}/packages/${MACHINE_ARCH} # Store generated packages on a per- # architecture base # Possible: any path you like # Default: /usr/pkgsrc/packages #PASSIVE_FETCH= 1 # Use ftp(1) in passive mode, for use behind # filtering firewalls. # (Set by default in ftp(1) in NetBSD-current) # Possible: defined, not defined # Default: not defined #ACCEPTABLE_LICENSES= shareware no-commercial-use fee-based-commercial-use # Whitespace-delimited list of the types of # license which are acceptable for installation. # (apart from standard "free" licenses such as # Berkeley/CMU and GPL). # Possible: shareware, no-commercial-use, # fee-based-commercial-use # Default: none #SPECIFIC_PKGS= yes # Don't use the default of all packages (from the # top-level of the pkgsrc tree), and use the # values of the definitions SITE_SPECIFIC_PKGS, # HOST_SPECIFIC_PKGS, GROUP_SPECIFIC_PKGS, and # USER_SPECIFIC_PKGS. #SITE_SPECIFIC_PKGS= # List of packages that are wanted for each # host on the site. Each package in the list # is of the form /. # Possible: any combination of packages # Default: not set #HOST_SPECIFIC_PKGS= # List of packages that are wanted for this # particular host/machine. Each package in the # list is of the form /. # Possible: any combination of packages # Default: not set #GROUP_SPECIFIC_PKGS= # List of packages that are wanted for this # group of users. Each package in the list # is of the form /. # Possible: any combination of packages # Default: not set #USER_SPECIFIC_PKGS= # List of packages that are wanted for this # particular user. Each package in the list # is of the form /. # Possible: any combination of packages # Default: not set #FAILOVER_FETCH= yes # Perform a checksum at "make fetch" time. # If the checksum doesn't match the stored # value, try to retrieve the file from the # next site in the list # Possible: set, not set # Default: not set #EXTRACT_USING_PAX= yes # Use pax(1) to extract archives, rather than # GNU tar. # Possible: defined, not defined # Default: not defined #PRE_ROOT_CMD=${CHMOD} -R o+w ${WRKDIR} # Command to be run by normal user, # just before becoming root (see SU_CMD) to # install the package. For example, the # command shown would allow root to write and # modify files below ${WRKDIR}, if on an # NFS -noroot file system. # Possible: any shell commands # Default: none #SU_CMD=${SU} - root -c # Command to perform before "make install", # if the user does not have an effective uid of # 0. A possible substitute is "sudo -u root" # Possible: su, sudo, or priv, with appropriate # arguments # Default: ${SU} - root -c # # Definitions used only in the packages collection # #AMANDA_USER= backup # Used in the amanda packages to specify the # login user and group responsible for backups # Possible: any user name # Default: backup #AMANDA_SMB= # Used in the amanda-client package to enable # backup with smbclient # Possible: defined, not defined # Default: not defined #AMANDA_VAR= /var/amanda # Specifies the directory in which amanda puts # its logs and status files. # Default: /var/amanda #BOOTSTRAP_EGCS= # Used in egcs-current package to set # bootstrap compile (two-stage) mode. # Possible: defined, not defined # Default: not defined #DOMAIN_NAME= # Used in the knews package to set the domain # name. # Possible: almost anything really, usually a # FQDN. # Default: none #DONT_USE_IDEA= # Used in ssh package to stop IDEA encryption # Possible: defined, not defined # Default: not defined #EXTRA_DICT= # Used by ispell package to specify an extra # national dictionary. # Possible: [agc - unknown] # Default: not defined #GIMP_SMALL_DATA= # Used in gimp package to specify installation # of the small data set only. # Possible: defined, not defined # Default: not defined #ISPELL_FR= # Used by ispell to specify a French/English # dictionary. # Possible: defined, not defined # Default: not defined #ISPELL_LANG= # Used by ispell to specify national dictionary # Possible: not defined, british # Default: not defined #LIBWRAP_FWD= # Make libwrap also compare against forwards # Possible: not defined, YES # Default: not defined #M68060= # Used mostly by packages (e.g.: pgp2, # ssh) with have fast 68020/030/040 assembler # routines for multiprecision arithmetic, which # use # the 32/64bit mul/div instruction. # These instructions are software emulated # on the 68060, thus very slow. # Set to YES when compiling for the # 68060 cpu. # Possible: not defined, YES. # Default: not defined. #MAKE_EBONES= # Used in fetchmail and zephyr to specify use # of non-USA Kerberos-compatible subsystem. # Possible: defined, not defined # Default: not defined #MAKE_KERBEROS4= # Used in the fetchmail package to specify use # of Kerberos subsystem. # Possible: defined, not defined # Default: not defined #MUTT_INTERNATIONAL= yes # Used to decide if international export # restricted version of "mutt" is built. # Possible: not defined, YES # Default: not defined NMH_MTA= smtp # default MTA for use in nmh. # Possible: smtp or sendmail. # Default: smtp #NOMANINSTALL= # Used in expact package to stop installation # of manual pages. # Possible: defined, not defined # Default: not defined PAPERSIZE= A4 # Default paper size for packages. # Possible: A4, Letter, Letterdj. # Default: none #PATCH_DEBUG= # Used in exmh package to denote debugging # Possible: defined, not defined # Default: not defined #PGGROUP=ingres # Used in postgresql package as the groupname # of the database administrator # Possible: any group name # Default: ingres #PGUSER=pgsql # Used in postgresql package as the username # of the database admin # Possible: any user name # Default: pgsql #RCS_LOCALID= # Used in cvs-current package for an RCS Id # which is expanded. # Possible: anything (within reason) # Default: none #SSH_CONF_DIR= # Used in ssh to set the configuration # directory. # Possible: any valid directory # Default: /etc #SSH_SUID= # Used in ssh to enable setuid installation # of "ssh" binary. # Possible: YES, or NO. # Default: NO #USE_MENUS= # Used in xvile package to build in support for # menus. # Possible: defined, not defined # Default: undefined #USE_MULE= # Used in xemacs package to build MULE # extensions # Possible: defined, not defined # Default: not defined #USE_RSAREF2= NO # Use the RSA reference package # Possible: YES (US domestic only), or NO. # Default: not defined. #USE_SOCKS= # Used to specify SOCKS firewall support # Set this to the version of socks necessary. # Possible: 4, 5, not defined # Default: not defined #USE_XFACE= # Used in xemacs package to build in # support for xface (pkgsrc/mail/face) # Possible: defined, not defined # Default: not defined #WINDOWMAKER_OPTIONS # Options for building windowmaker package # Used to add support for GNOME, KDE or # OPEN LOOK(tm) and to avoid redundancies # with KDE. # Possible: gnome, kde, openlook, lite # Default: gnome kde #WINDOWMAKER_THEMES= ... # Used in wm-themes package to specify # the themes which will be installed. # Possible: see http://wm.themes.org/ # Default: FreeBSD-theme #ZIP_ENCRYPTION= # Add encryption code to zip, zip1, and unzip # Possible: defined, not defined # Default: not defined # # Overrides for faster or cheaper sites. # # Refer to http://www.netbsd.org/Sites/net.html or /usr/doc/MIRRORS # for information on determining the location of NetBSD mirror sites. # # Australia (AARNET). Swap order of ftp.au.netbsd.org and # ftp2.au.netbsd.org if your link to University of Queensland is # cheaper/faster than your link to RMIT University (Melbourne). # #MASTER_SITE_XCONTRIB= ftp://mirror.aarnet.edu.au/X11/contrib/ #MASTER_SITE_GNU= ftp://mirror.aarnet.edu.au/gnu/ #MASTER_SITE_PERL_CPAN= ftp://mirror.aarnet.edu.au/perl/CPAN/modules/by-module/ #MASTER_SITE_TEX_CTAN= ftp://mirror.aarnet.edu.au/tex-archive/ #MASTER_SITE_SUNSITE= ftp://mirror.aarnet.edu.au/sunsite.unc.edu/ #MASTER_SITE_BACKUP= \ # ftp://ftp.au.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ \ # ftp://ftp2.au.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ #MASTER_SITE_LOCAL= \ # ftp://ftp.au.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ # ftp://ftp2.au.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ # Finland # #MASTER_SITE_XCONTRIB= ftp://ftp.funet.fi/pub/X11/contrib/ #MASTER_SITE_GNU= ftp://ftp.funet.fi/pub/gnu/gnu/ #MASTER_SITE_PERL_CPAN= \ # ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_TEX_CTAN= ftp://ftp.funet.fi/pub/TeX/CTAN/ #MASTER_SITE_SUNSITE= \ # ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/ #MASTER_SITE_BACKUP= \ # ftp://ftp.fi.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ #MASTER_SITE_LOCAL= \ # ftp://ftp.fi.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ # Austria # #MASTER_SITE_XCONTRIB= ftp://ftp.at.netbsd.org/hci/X11/contrib/ #MASTER_SITE_GNU= ftp://ftp.at.netbsd.org/gnu/gnusrc/ #MASTER_SITE_PERL_CPAN= ftp://ftp.at.netbsd.org/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_TEX_CTAN= ftp://ftp.at.netbsd.org/publishing/tex/CTAN/ #MASTER_SITE_SUNSITE= ftp://ftp.univie.ac.at/systems/linux/sunsite/ #MASTER_SITE_BACKUP= ftp://ftp.at.netbsd.org/opsys/NetBSD/packages/distfiles/${DIST_SUBDIR}/ #MASTER_SITE_LOCAL= ftp://ftp.at.netbsd.org/opsys/NetBSD/packages/distfiles/LOCAL_PORTS/ # Denmark # #MASTER_SITE_XCONTRIB= ftp://ftp.sunsite.auc.dk/mirrors/ftp.x.org/contrib/ #MASTER_SITE_GNU= ftp://ftp.sunsite.auc.dk/pub/gnu/ #MASTER_SITE_PERL_CPAN= ftp://ftp.sunsite.auc.dk/pub/languages/perl/CPAN/modules/by-module/ #MASTER_SITE_TEX_CTAN= ftp://ftp.sunsite.auc.dk/pub/tex/ctan/ #MASTER_SITE_SUNSITE= ftp://ftp.sunsite.auc.dk/mirrors/sunsite.unc.edu/pub/Linux/ #MASTER_SITE_BACKUP= ftp://ftp.dk.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ #MASTER_SITE_LOCAL= ftp://ftp.dk.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ # Japan # #MASTER_SITE_XCONTRIB= ftp://ftp.ring.gr.jp/pub/X/opengroup/contrib/ #MASTER_SITE_GNU= ftp://ftp.ring.gr.jp/pub/GNU/ #MASTER_SITE_PERL_CPAN= ftp://ftp.ring.gr.jp/pub/lang/perl/CPAN/modules/by-module/ #MASTER_SITE_TEX_CTAN= ftp://ftp.ring.gr.jp/pub/text/CTAN/ #MASTER_SITE_SUNSITE= ftp://sunsite.sut.ac.jp/pub/archives/linux/ #MASTER_SITE_BACKUP= \ # ftp://ftp.ring.gr.jp/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ \ # ftp://ftp.jp.netbsd.org/pub/NetBSD/packages/distfiles/${DIST_SUBDIR}/ #MASTER_SITE_LOCAL= \ # ftp://ftp.ring.gr.jp/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \ # ftp://ftp.jp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/