# hf6to4.conf
#

out_if="ppp0"			# Our outgoing (uplink) interface
in_if="rtk0"			# Inside (ethernet) interface

v6_net="1"			# 2002:x:x:v6_net::
v6_innernet="2"			# 2002:x:x:v6_innernet::
v6_prefixlen=16			# Change for more
hostbits6=":1"			# should be determined via MAC of $in_if

###########################################################################
#
# Selection of 6to4 relay router. If "peer" is not set,
# "remoteadr4" and "remoteadr6" must be set!
#

# Some possible remote 6to4 routers; DNS lookups will be used
# to determine their IPv4 and IPv6 adresses (see below on how
# to avoid these lookups):
#peer="6to4.ipv6.fh-regensburg.de" # Germany, Europe
#peer="6to4-anycast"               # use RFC 3068 magic values
#peer="asterix.ipv6.bt.com"	   # Great Britain, Europe
#peer="6to4.kfu.com"		   # USA, West coast
#peer="6to4.ipv6.microsoft.com"    # USA, West coast
#peer="ipv6-router.cisco.com"      # USA, West coast; register at http://www.cisco.com/ipv6/

#
# To prevent DNS lookups of peer, directly specify IPv4 and IPv6 address
# of 6to4 relay router:
#

# 6to4.ipv6.fh-regensburg.de - Germany, Europe:
remoteadr4="194.95.108.191"
remoteadr6="2002:c25f:6cbf:1::1"