$NetBSD: patch-Makefile,v 1.6 2021/01/02 22:45:43 jnemeth Exp $

--- Makefile.orig	2019-10-08 17:10:52.000000000 +0000
+++ Makefile
@@ -145,7 +145,7 @@ DEBUG=-g3
 
 # Asterisk.conf is located in ASTETCDIR or by using the -C flag
 # when starting Asterisk
-ASTCONFPATH=$(ASTETCDIR)/asterisk.conf
+ASTCONFPATH=$(ASTEXAMPLEDIR)/asterisk.conf
 AGI_DIR=$(ASTDATADIR)/agi-bin
 
 # If you use Apache, you may determine by a grep 'DocumentRoot' of your httpd.conf file
@@ -182,6 +182,9 @@ DAHDI_UDEV_HOOK_DIR = /usr/share/dahdi/s
 # supported run:
 # menuselect/menuselect --help
 
+GLOBAL_MAKEOPTS=$(wildcard /etc/asterisk.makeopts)
+USER_MAKEOPTS=$(wildcard ~/.asterisk.makeopts)
+
 
 MOD_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
 OTHER_SUBDIR_CFLAGS="-I$(ASTTOPDIR)/include"
@@ -218,12 +221,6 @@ ifeq ($(AST_DEVMODE),yes)
   endif
 endif
 
-ifeq ($(OSARCH),NetBSD)
-  _ASTCFLAGS+=-isystem /usr/pkg/include
-else ifneq ($(findstring BSD,$(OSARCH)),)
-  _ASTCFLAGS+=-isystem /usr/local/include
-endif
-
 ifeq ($(OSARCH),FreeBSD)
   # -V is understood by BSD Make, not by GNU make.
   BSDVERSION=$(shell make -V OSVERSION -f /usr/share/mk/bsd.port.subdir.mk)
@@ -358,10 +355,10 @@ makeopts: configure
 	@echo "****"
 	@exit 1
 
-menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps
+menuselect.makeopts: menuselect/menuselect menuselect-tree makeopts build_tools/menuselect-deps $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
 ifeq ($(filter %menuselect,$(MAKECMDGOALS)),)
 	menuselect/menuselect --check-deps $@
-	menuselect/menuselect --check-deps $@
+	menuselect/menuselect --check-deps $@ $(GLOBAL_MAKEOPTS) $(USER_MAKEOPTS)
 endif
 
 $(MOD_SUBDIRS_MENUSELECT_TREE):
@@ -434,7 +431,6 @@ dist-clean: distclean
 
 distclean: $(SUBDIRS_DIST_CLEAN) _clean
 	@$(MAKE) -C menuselect dist-clean
-	@$(MAKE) -C sounds dist-clean
 	rm -f menuselect.makeopts makeopts menuselect-tree menuselect.makedeps
 	rm -f config.log config.status config.cache
 	rm -rf autom4te.cache
@@ -555,7 +551,7 @@ update:
 
 NEWHEADERS=$(notdir $(wildcard include/asterisk/*.h))
 OLDHEADERS=$(filter-out $(NEWHEADERS) $(notdir $(DESTDIR)$(ASTHEADERDIR)),$(notdir $(wildcard $(DESTDIR)$(ASTHEADERDIR)/*.h)))
-INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTETCDIR)" "$(ASTVARRUNDIR)" \
+INSTALLDIRS="$(ASTLIBDIR)" "$(ASTMODDIR)" "$(ASTSBINDIR)" "$(ASTEXAMPLEDIR)" "$(ASTVARRUNDIR)" \
 	"$(ASTSPOOLDIR)" "$(ASTSPOOLDIR)/dictate" "$(ASTSPOOLDIR)/meetme" \
 	"$(ASTSPOOLDIR)/monitor" "$(ASTSPOOLDIR)/system" "$(ASTSPOOLDIR)/tmp" \
 	"$(ASTSPOOLDIR)/voicemail" "$(ASTSPOOLDIR)/recording" \
@@ -761,7 +757,7 @@ upgrade: bininstall
 #  (2) the extension to strip off
 define INSTALL_CONFIGS
 	@for x in $(1)/*$(2); do \
-		dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x $(2)`"; \
+		dst="$(DESTDIR)$(ASTEXAMPLEDIR)/`$(BASENAME) $$x $(2)`"; \
 		if [ -f "$${dst}" ]; then \
 			if [ "$(OVERWRITE)" = "y" ]; then \
 				if cmp -s "$${dst}" "$$x" ; then \
@@ -790,9 +786,9 @@ define INSTALL_CONFIGS
 			-e 's|^astrundir.*$$|astrundir => $(ASTVARRUNDIR)|' \
 			-e 's|^astlogdir.*$$|astlogdir => $(ASTLOGDIR)|' \
 			-e 's|^astsbindir.*$$|astsbindir => $(ASTSBINDIR)|' \
-			"$(DESTDIR)$(ASTCONFPATH)" > "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
-		$(INSTALL) -m 644 "$(DESTDIR)$(ASTCONFPATH).tmp" "$(DESTDIR)$(ASTCONFPATH)" ; \
-		rm -f "$(DESTDIR)$(ASTCONFPATH).tmp" ; \
+			"$(DESTDIR)$(ASTEXAMPLEDIR)/asterisk.conf" > "$(DESTDIR)$(ASTEXAMPLEDIR)/asterisk.conf.tmp" ; \
+		$(INSTALL) -m 644 "$(DESTDIR)$(ASTEXAMPLEDIR)/asterisk.conf.tmp" "$(DESTDIR)$(ASTEXAMPLEDIR)/asterisk.conf" ; \
+		rm -f "$(DESTDIR)$(ASTEXAMPLEDIR)/asterisk.conf.tmp" ; \
 	fi
 endef
 
@@ -817,15 +813,15 @@ install-configs:
 # XXX why *.adsi is installed first ?
 adsi:
 	@echo Installing adsi config files...
-	$(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)"
+	$(INSTALL) -d "$(DESTDIR)$(ASTEXAMPLEDIR)"
 	@for x in configs/samples/*.adsi; do \
-		dst="$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
+		dst="$(DESTDIR)$(ASTEXAMPLEDIR)/`$(BASENAME) $$x`" ; \
 		if [ -f "$${dst}" ] ; then \
 			echo "Overwriting $$x" ; \
 		else \
 			echo "Installing $$x" ; \
 		fi ; \
-		$(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTETCDIR)/`$(BASENAME) $$x`" ; \
+		$(INSTALL) -m 644 "$$x" "$(DESTDIR)$(ASTEXAMPLEDIR)/`$(BASENAME) $$x`" ; \
 	done
 
 samples: adsi
@@ -858,7 +854,7 @@ basic-pbx:
 webvmail:
 	@[ -d "$(DESTDIR)$(HTTP_DOCSDIR)/" ] || ( printf "http docs directory not found.\nUpdate assignment of variable HTTP_DOCSDIR in Makefile!\n" && exit 1 )
 	@[ -d "$(DESTDIR)$(HTTP_CGIDIR)" ] || ( printf "cgi-bin directory not found.\nUpdate assignment of variable HTTP_CGIDIR in Makefile!\n" && exit 1 )
-	$(INSTALL) -m 4755 contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail.cgi"
+	$(INSTALL) contrib/scripts/vmail.cgi "$(DESTDIR)$(HTTP_CGIDIR)/vmail"
 	$(INSTALL) -d "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk"
 	for x in images/*.gif; do \
 		$(INSTALL) -m 644 $$x "$(DESTDIR)$(HTTP_DOCSDIR)/_asterisk/"; \
@@ -908,11 +904,11 @@ endif
 endif
 
 install-logrotate:
-	if [ ! -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ]; then \
-		$(INSTALL) -d "$(DESTDIR)$(ASTETCDIR)/../logrotate.d" ; \
+	if [ ! -d "$(DESTDIR)$(ASTEXAMPLEDIR)/../logrotate.d" ]; then \
+		$(INSTALL) -d "$(DESTDIR)$(ASTEXAMPLEDIR)/../logrotate.d" ; \
 	fi
 	sed 's#__LOGDIR__#$(ASTLOGDIR)#g' < contrib/scripts/asterisk.logrotate | sed 's#__SBINDIR__#$(ASTSBINDIR)#g' > contrib/scripts/asterisk.logrotate.tmp
-	$(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTETCDIR)/../logrotate.d/asterisk"
+	$(INSTALL) -m 0644 contrib/scripts/asterisk.logrotate.tmp "$(DESTDIR)$(ASTEXAMPLEDIR)/../logrotate.d/asterisk"
 	rm -f contrib/scripts/asterisk.logrotate.tmp
 
 config:
@@ -1039,7 +1035,7 @@ uninstall-all: _uninstall uninstall-head
 	rm -rf "$(DESTDIR)$(ASTVARLIBDIR)"
 	rm -rf "$(DESTDIR)$(ASTDATADIR)"
 	rm -rf "$(DESTDIR)$(ASTSPOOLDIR)"
-	rm -rf "$(DESTDIR)$(ASTETCDIR)"
+	rm -rf "$(DESTDIR)$(ASTEXAMPLEDIR)"
 	rm -rf "$(DESTDIR)$(ASTLOGDIR)"
 
 menuconfig: menuselect
@@ -1129,6 +1125,7 @@ check-alembic: makeopts
 .PHONY: install-configs
 .PHONY: install-headers
 .PHONY: menuselect
+.PHONY: menuselect.makeopts
 .PHONY: main
 .PHONY: sounds
 .PHONY: clean