/* $NetBSD: sha2.c,v 1.1.1.4 2018/02/06 01:53:06 christos Exp $ */ /* $OpenLDAP$ */ /* * FILE: sha2.c * AUTHOR: Aaron D. Gifford - http://www.aarongifford.com/ * * Copyright (c) 2000-2001, Aaron D. Gifford * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the copyright holder nor the names of contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTOR(S) ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTOR(S) BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * Id: sha2.c,v 1.1 2001/11/08 00:01:51 adg Exp adg */ #include /* memcpy()/memset() or bcopy()/bzero() */ #include /* assert() */ #include "sha2.h" /* * ASSERT NOTE: * Some sanity checking code is included using assert(). On my FreeBSD * system, this additional code can be removed by compiling with NDEBUG * defined. Check your own systems manpage on assert() to see how to * compile WITHOUT the sanity checking code on your system. * * UNROLLED TRANSFORM LOOP NOTE: * You can define SHA2_UNROLL_TRANSFORM to use the unrolled transform * loop version for the hash transform rounds (defined using macros * later in this file). Either define on the command line, for example: * * cc -DSHA2_UNROLL_TRANSFORM -o sha2 sha2.c sha2prog.c * * or define below: * * #define SHA2_UNROLL_TRANSFORM * */ /*** SHA-256/384/512 Machine Architecture Definitions *****************/ /* * BYTE_ORDER NOTE: * * Please make sure that your system defines BYTE_ORDER. If your * architecture is little-endian, make sure it also defines * LITTLE_ENDIAN and that the two (BYTE_ORDER and LITTLE_ENDIAN) are * equivilent. * * If your system does not define the above, then you can do so by * hand like this: * * #define LITTLE_ENDIAN 1234 * #define BIG_ENDIAN 4321 * * And for little-endian machines, add: * * #define BYTE_ORDER LITTLE_ENDIAN * * Or for big-endian machines: * * #define BYTE_ORDER BIG_ENDIAN * * The FreeBSD machine this was written on defines BYTE_ORDER * appropriately by including (which in turn includes * where the appropriate definitions are actually * made). */ #if !defined(BYTE_ORDER) || (BYTE_ORDER != LITTLE_ENDIAN && BYTE_ORDER != BIG_ENDIAN) #error Define BYTE_ORDER to be equal to either LITTLE_ENDIAN or BIG_ENDIAN #endif /* * Define the followingsha2_* types to types of the correct length on * the native archtecture. Most BSD systems and Linux define u_intXX_t * types. Machines with very recent ANSI C headers, can use the * uintXX_t definintions from inttypes.h by defining SHA2_USE_INTTYPES_H * during compile or in the sha.h header file. * * Machines that support neither u_intXX_t nor inttypes.h's uintXX_t * will need to define these three typedefs below (and the appropriate * ones in sha.h too) by hand according to their system architecture. * * Thank you, Jun-ichiro itojun Hagino, for suggesting using u_intXX_t * types and pointing out recent ANSI C support for uintXX_t in inttypes.h. */ #ifdef SHA2_USE_INTTYPES_H typedef uint8_t sha2_byte; /* Exactly 1 byte */ typedef uint32_t sha2_word32; /* Exactly 4 bytes */ typedef uint64_t sha2_word64; /* Exactly 8 bytes */ #else /* SHA2_USE_INTTYPES_H */ typedef u_int8_t sha2_byte; /* Exactly 1 byte */ typedef u_int32_t sha2_word32; /* Exactly 4 bytes */ typedef u_int64_t sha2_word64; /* Exactly 8 bytes */ #endif /* SHA2_USE_INTTYPES_H */ /*** SHA-256/384/512 Various Length Definitions ***********************/ /* NOTE: Most of these are in sha2.h */ #define SHA256_SHORT_BLOCK_LENGTH (SHA256_BLOCK_LENGTH - 8) #define SHA384_SHORT_BLOCK_LENGTH (SHA384_BLOCK_LENGTH - 16) #define SHA512_SHORT_BLOCK_LENGTH (SHA512_BLOCK_LENGTH - 16) /*** ENDIAN REVERSAL MACROS *******************************************/ #if BYTE_ORDER == LITTLE_ENDIAN #define REVERSE32(w,x) { \ sha2_word32 tmp = (w); \ tmp = (tmp >> 16) | (tmp << 16); \ (x) = ((tmp & 0xff00ff00UL) >> 8) | ((tmp & 0x00ff00ffUL) << 8); \ } #define REVERSE64(w,x) { \ sha2_word64 tmp = (w); \ tmp = (tmp >> 32) | (tmp << 32); \ tmp = ((tmp & 0xff00ff00ff00ff00ULL) >> 8) | \ ((tmp & 0x00ff00ff00ff00ffULL) << 8); \ (x) = ((tmp & 0xffff0000ffff0000ULL) >> 16) | \ ((tmp & 0x0000ffff0000ffffULL) << 16); \ } #endif /* BYTE_ORDER == LITTLE_ENDIAN */ /* * Macro for incrementally adding the unsigned 64-bit integer n to the * unsigned 128-bit integer (represented using a two-element array of * 64-bit words): */ #define ADDINC128(w,n) { \ (w)[0] += (sha2_word64)(n); \ if ((w)[0] < (n)) { \ (w)[1]++; \ } \ } /* * Macros for copying blocks of memory and for zeroing out ranges * of memory. Using these macros makes it easy to switch from * using memset()/memcpy() and using bzero()/bcopy(). * * Please define either SHA2_USE_MEMSET_MEMCPY or define * SHA2_USE_BZERO_BCOPY depending on which function set you * choose to use: */ #if !defined(SHA2_USE_MEMSET_MEMCPY) && !defined(SHA2_USE_BZERO_BCOPY) /* Default to memset()/memcpy() if no option is specified */ #define SHA2_USE_MEMSET_MEMCPY 1 #endif #if defined(SHA2_USE_MEMSET_MEMCPY) && defined(SHA2_USE_BZERO_BCOPY) /* Abort with an error if BOTH options are defined */ #error Define either SHA2_USE_MEMSET_MEMCPY or SHA2_USE_BZERO_BCOPY, not both! #endif #ifdef SHA2_USE_MEMSET_MEMCPY #define MEMSET_BZERO(p,l) memset((p), 0, (l)) #define MEMCPY_BCOPY(d,s,l) memcpy((d), (s), (l)) #endif #ifdef SHA2_USE_BZERO_BCOPY #define MEMSET_BZERO(p,l) bzero((p), (l)) #define MEMCPY_BCOPY(d,s,l) bcopy((s), (d), (l)) #endif /*** THE SIX LOGICAL FUNCTIONS ****************************************/ /* * Bit shifting and rotation (used by the six SHA-XYZ logical functions: * * NOTE: The naming of R and S appears backwards here (R is a SHIFT and * S is a ROTATION) because the SHA-256/384/512 description document * (see http://csrc.nist.gov/cryptval/shs/sha256-384-512.pdf) uses this * same "backwards" definition. */ /* Shift-right (used in SHA-256, SHA-384, and SHA-512): */ #define R(b,x) ((x) >> (b)) /* 32-bit Rotate-right (used in SHA-256): */ #define S32(b,x) (((x) >> (b)) | ((x) << (32 - (b)))) /* 64-bit Rotate-right (used in SHA-384 and SHA-512): */ #define S64(b,x) (((x) >> (b)) | ((x) << (64 - (b)))) /* Two of six logical functions used in SHA-256, SHA-384, and SHA-512: */ #define Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) #define Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) /* Four of six logical functions used in SHA-256: */ #define Sigma0_256(x) (S32(2, (x)) ^ S32(13, (x)) ^ S32(22, (x))) #define Sigma1_256(x) (S32(6, (x)) ^ S32(11, (x)) ^ S32(25, (x))) #define sigma0_256(x) (S32(7, (x)) ^ S32(18, (x)) ^ R(3 , (x))) #define sigma1_256(x) (S32(17, (x)) ^ S32(19, (x)) ^ R(10, (x))) /* Four of six logical functions used in SHA-384 and SHA-512: */ #define Sigma0_512(x) (S64(28, (x)) ^ S64(34, (x)) ^ S64(39, (x))) #define Sigma1_512(x) (S64(14, (x)) ^ S64(18, (x)) ^ S64(41, (x))) #define sigma0_512(x) (S64( 1, (x)) ^ S64( 8, (x)) ^ R( 7, (x))) #define sigma1_512(x) (S64(19, (x)) ^ S64(61, (x)) ^ R( 6, (x))) /*** INTERNAL FUNCTION PROTOTYPES *************************************/ /* NOTE: These should not be accessed directly from outside this * library -- they are intended for private internal visibility/use * only. */ static void SHA512_Last(SHA512_CTX*); static void SHA256_Transform(SHA256_CTX*, const sha2_word32*); static void SHA512_Transform(SHA512_CTX*, const sha2_word64*); /*** SHA-XYZ INITIAL HASH VALUES AND CONSTANTS ************************/ /* Hash constant words K for SHA-256: */ const static sha2_word32 K256[64] = { 0x428a2f98UL, 0x71374491UL, 0xb5c0fbcfUL, 0xe9b5dba5UL, 0x3956c25bUL, 0x59f111f1UL, 0x923f82a4UL, 0xab1c5ed5UL, 0xd807aa98UL, 0x12835b01UL, 0x243185beUL, 0x550c7dc3UL, 0x72be5d74UL, 0x80deb1feUL, 0x9bdc06a7UL, 0xc19bf174UL, 0xe49b69c1UL, 0xefbe4786UL, 0x0fc19dc6UL, 0x240ca1ccUL, 0x2de92c6fUL, 0x4a7484aaUL, 0x5cb0a9dcUL, 0x76f988daUL, 0x983e5152UL, 0xa831c66dUL, 0xb00327c8UL, 0xbf597fc7UL, 0xc6e00bf3UL, 0xd5a79147UL, 0x06ca6351UL, 0x14292967UL, 0x27b70a85UL, 0x2e1b2138UL, 0x4d2c6dfcUL, 0x53380d13UL, 0x650a7354UL, 0x766a0abbUL, 0x81c2c92eUL, 0x92722c85UL, 0xa2bfe8a1UL, 0xa81a664bUL, 0xc24b8b70UL, 0xc76c51a3UL, 0xd192e819UL, 0xd6990624UL, 0xf40e3585UL, 0x106aa070UL, 0x19a4c116UL, 0x1e376c08UL, 0x2748774cUL, 0x34b0bcb5UL, 0x391c0cb3UL, 0x4ed8aa4aUL, 0x5b9cca4fUL, 0x682e6ff3UL, 0x748f82eeUL, 0x78a5636fUL, 0x84c87814UL, 0x8cc70208UL, 0x90befffaUL, 0xa4506cebUL, 0xbef9a3f7UL, 0xc67178f2UL }; /* Initial hash value H for SHA-256: */ const static sha2_word32 sha256_initial_hash_value[8] = { 0x6a09e667UL, 0xbb67ae85UL, 0x3c6ef372UL, 0xa54ff53aUL, 0x510e527fUL, 0x9b05688cUL, 0x1f83d9abUL, 0x5be0cd19UL }; /* Hash constant words K for SHA-384 and SHA-512: */ const static sha2_word64 K512[80] = { 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL }; /* Initial hash value H for SHA-384 */ const static sha2_word64 sha384_initial_hash_value[8] = { 0xcbbb9d5dc1059ed8ULL, 0x629a292a367cd507ULL, 0x9159015a3070dd17ULL, 0x152fecd8f70e5939ULL, 0x67332667ffc00b31ULL, 0x8eb44a8768581511ULL, 0xdb0c2e0d64f98fa7ULL, 0x47b5481dbefa4fa4ULL }; /* Initial hash value H for SHA-512 */ const static sha2_word64 sha512_initial_hash_value[8] = { 0x6a09e667f3bcc908ULL, 0xbb67ae8584caa73bULL, 0x3c6ef372fe94f82bULL, 0xa54ff53a5f1d36f1ULL, 0x510e527fade682d1ULL, 0x9b05688c2b3e6c1fULL, 0x1f83d9abfb41bd6bULL, 0x5be0cd19137e2179ULL }; /* * Constant used by SHA256/384/512_End() functions for converting the * digest to a readable hexadecimal character string: */ static const char *sha2_hex_digits = "0123456789abcdef"; /*** SHA-256: *********************************************************/ void SHA256_Init(SHA256_CTX* context) { if (context == (SHA256_CTX*)0) { return; } MEMCPY_BCOPY(context->state, sha256_initial_hash_value, SHA256_DIGEST_LENGTH); MEMSET_BZERO(context->buffer, SHA256_BLOCK_LENGTH); context->bitcount = 0; } #ifdef SHA2_UNROLL_TRANSFORM /* Unrolled SHA-256 round macros: */ #if BYTE_ORDER == LITTLE_ENDIAN #define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \ REVERSE32(*data++, W256[j]); \ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \ K256[j] + W256[j]; \ (d) += T1; \ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \ j++ #else /* BYTE_ORDER == LITTLE_ENDIAN */ #define ROUND256_0_TO_15(a,b,c,d,e,f,g,h) \ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + \ K256[j] + (W256[j] = *data++); \ (d) += T1; \ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \ j++ #endif /* BYTE_ORDER == LITTLE_ENDIAN */ #define ROUND256(a,b,c,d,e,f,g,h) \ s0 = W256[(j+1)&0x0f]; \ s0 = sigma0_256(s0); \ s1 = W256[(j+14)&0x0f]; \ s1 = sigma1_256(s1); \ T1 = (h) + Sigma1_256(e) + Ch((e), (f), (g)) + K256[j] + \ (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); \ (d) += T1; \ (h) = T1 + Sigma0_256(a) + Maj((a), (b), (c)); \ j++ void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) { sha2_word32 a, b, c, d, e, f, g, h, s0, s1; sha2_word32 T1, *W256; int j; W256 = (sha2_word32*)context->buffer; /* Initialize registers with the prev. intermediate value */ a = context->state[0]; b = context->state[1]; c = context->state[2]; d = context->state[3]; e = context->state[4]; f = context->state[5]; g = context->state[6]; h = context->state[7]; j = 0; do { /* Rounds 0 to 15 (unrolled): */ ROUND256_0_TO_15(a,b,c,d,e,f,g,h); ROUND256_0_TO_15(h,a,b,c,d,e,f,g); ROUND256_0_TO_15(g,h,a,b,c,d,e,f); ROUND256_0_TO_15(f,g,h,a,b,c,d,e); ROUND256_0_TO_15(e,f,g,h,a,b,c,d); ROUND256_0_TO_15(d,e,f,g,h,a,b,c); ROUND256_0_TO_15(c,d,e,f,g,h,a,b); ROUND256_0_TO_15(b,c,d,e,f,g,h,a); } while (j < 16); /* Now for the remaining rounds to 64: */ do { ROUND256(a,b,c,d,e,f,g,h); ROUND256(h,a,b,c,d,e,f,g); ROUND256(g,h,a,b,c,d,e,f); ROUND256(f,g,h,a,b,c,d,e); ROUND256(e,f,g,h,a,b,c,d); ROUND256(d,e,f,g,h,a,b,c); ROUND256(c,d,e,f,g,h,a,b); ROUND256(b,c,d,e,f,g,h,a); } while (j < 64); /* Compute the current intermediate hash value */ context->state[0] += a; context->state[1] += b; context->state[2] += c; context->state[3] += d; context->state[4] += e; context->state[5] += f; context->state[6] += g; context->state[7] += h; /* Clean up */ a = b = c = d = e = f = g = h = T1 = 0; } #else /* SHA2_UNROLL_TRANSFORM */ void SHA256_Transform(SHA256_CTX* context, const sha2_word32* data) { sha2_word32 a, b, c, d, e, f, g, h, s0, s1; sha2_word32 T1, T2, *W256; int j; W256 = (sha2_word32*)context->buffer; /* Initialize registers with the prev. intermediate value */ a = context->state[0]; b = context->state[1]; c = context->state[2]; d = context->state[3]; e = context->state[4]; f = context->state[5]; g = context->state[6]; h = context->state[7]; j = 0; do { #if BYTE_ORDER == LITTLE_ENDIAN /* Copy data while converting to host byte order */ REVERSE32(*data++,W256[j]); /* Apply the SHA-256 compression function to update a..h */ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + W256[j]; #else /* BYTE_ORDER == LITTLE_ENDIAN */ /* Apply the SHA-256 compression function to update a..h with copy */ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + (W256[j] = *data++); #endif /* BYTE_ORDER == LITTLE_ENDIAN */ T2 = Sigma0_256(a) + Maj(a, b, c); h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a = T1 + T2; j++; } while (j < 16); do { /* Part of the message block expansion: */ s0 = W256[(j+1)&0x0f]; s0 = sigma0_256(s0); s1 = W256[(j+14)&0x0f]; s1 = sigma1_256(s1); /* Apply the SHA-256 compression function to update a..h */ T1 = h + Sigma1_256(e) + Ch(e, f, g) + K256[j] + (W256[j&0x0f] += s1 + W256[(j+9)&0x0f] + s0); T2 = Sigma0_256(a) + Maj(a, b, c); h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a = T1 + T2; j++; } while (j < 64); /* Compute the current intermediate hash value */ context->state[0] += a; context->state[1] += b; context->state[2] += c; context->state[3] += d; context->state[4] += e; context->state[5] += f; context->state[6] += g; context->state[7] += h; /* Clean up */ a = b = c = d = e = f = g = h = T1 = T2 = 0; } #endif /* SHA2_UNROLL_TRANSFORM */ void SHA256_Update(SHA256_CTX* context, const sha2_byte *data, size_t len) { unsigned int freespace, usedspace; if (len == 0) { /* Calling with no data is valid - we do nothing */ return; } /* Sanity check: */ assert(context != (SHA256_CTX*)0 && data != (sha2_byte*)0); usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH; if (usedspace > 0) { /* Calculate how much free space is available in the buffer */ freespace = SHA256_BLOCK_LENGTH - usedspace; if (len >= freespace) { /* Fill the buffer completely and process it */ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace); context->bitcount += freespace << 3; len -= freespace; data += freespace; SHA256_Transform(context, (sha2_word32*)context->buffer); } else { /* The buffer is not yet full */ MEMCPY_BCOPY(&context->buffer[usedspace], data, len); context->bitcount += len << 3; /* Clean up: */ usedspace = freespace = 0; return; } } while (len >= SHA256_BLOCK_LENGTH) { /* Process as many complete blocks as we can */ SHA256_Transform(context, (sha2_word32*)data); context->bitcount += SHA256_BLOCK_LENGTH << 3; len -= SHA256_BLOCK_LENGTH; data += SHA256_BLOCK_LENGTH; } if (len > 0) { /* There's left-overs, so save 'em */ MEMCPY_BCOPY(context->buffer, data, len); context->bitcount += len << 3; } /* Clean up: */ usedspace = freespace = 0; } void SHA256_Final(sha2_byte digest[], SHA256_CTX* context) { sha2_word32 *d = (sha2_word32*)digest; sha2_word64 *p; unsigned int usedspace; /* Sanity check: */ assert(context != (SHA256_CTX*)0); /* If no digest buffer is passed, we don't bother doing this: */ if (digest != (sha2_byte*)0) { usedspace = (context->bitcount >> 3) % SHA256_BLOCK_LENGTH; #if BYTE_ORDER == LITTLE_ENDIAN /* Convert FROM host byte order */ REVERSE64(context->bitcount,context->bitcount); #endif if (usedspace > 0) { /* Begin padding with a 1 bit: */ context->buffer[usedspace++] = 0x80; if (usedspace <= SHA256_SHORT_BLOCK_LENGTH) { /* Set-up for the last transform: */ MEMSET_BZERO(&context->buffer[usedspace], SHA256_SHORT_BLOCK_LENGTH - usedspace); } else { if (usedspace < SHA256_BLOCK_LENGTH) { MEMSET_BZERO(&context->buffer[usedspace], SHA256_BLOCK_LENGTH - usedspace); } /* Do second-to-last transform: */ SHA256_Transform(context, (sha2_word32*)context->buffer); /* And set-up for the last transform: */ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH); } } else { /* Set-up for the last transform: */ MEMSET_BZERO(context->buffer, SHA256_SHORT_BLOCK_LENGTH); /* Begin padding with a 1 bit: */ *context->buffer = 0x80; } /* Set the bit count: */ p = (sha2_word64 *)&context->buffer[SHA256_SHORT_BLOCK_LENGTH]; *p = context->bitcount; /* Final transform: */ SHA256_Transform(context, (sha2_word32*)context->buffer); #if BYTE_ORDER == LITTLE_ENDIAN { /* Convert TO host byte order */ int j; for (j = 0; j < 8; j++) { REVERSE32(context->state[j],context->state[j]); *d++ = context->state[j]; } } #else MEMCPY_BCOPY(d, context->state, SHA256_DIGEST_LENGTH); #endif } /* Clean up state data: */ MEMSET_BZERO(context, sizeof(*context)); usedspace = 0; } char *SHA256_End(SHA256_CTX* context, char buffer[]) { sha2_byte digest[SHA256_DIGEST_LENGTH], *d = digest; int i; /* Sanity check: */ assert(context != (SHA256_CTX*)0); if (buffer != (char*)0) { SHA256_Final(digest, context); for (i = 0; i < SHA256_DIGEST_LENGTH; i++) { *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4]; *buffer++ = sha2_hex_digits[*d & 0x0f]; d++; } *buffer = (char)0; } else { MEMSET_BZERO(context, sizeof(*context)); } MEMSET_BZERO(digest, SHA256_DIGEST_LENGTH); return buffer; } char* SHA256_Data(const sha2_byte* data, size_t len, char digest[SHA256_DIGEST_STRING_LENGTH]) { SHA256_CTX context; SHA256_Init(&context); SHA256_Update(&context, data, len); return SHA256_End(&context, digest); } /*** SHA-512: *********************************************************/ void SHA512_Init(SHA512_CTX* context) { if (context == (SHA512_CTX*)0) { return; } MEMCPY_BCOPY(context->state, sha512_initial_hash_value, SHA512_DIGEST_LENGTH); MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH); context->bitcount[0] = context->bitcount[1] = 0; } #ifdef SHA2_UNROLL_TRANSFORM /* Unrolled SHA-512 round macros: */ #if BYTE_ORDER == LITTLE_ENDIAN #define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \ REVERSE64(*data++, W512[j]); \ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \ K512[j] + W512[j]; \ (d) += T1, \ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)), \ j++ #else /* BYTE_ORDER == LITTLE_ENDIAN */ #define ROUND512_0_TO_15(a,b,c,d,e,f,g,h) \ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + \ K512[j] + (W512[j] = *data++); \ (d) += T1; \ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \ j++ #endif /* BYTE_ORDER == LITTLE_ENDIAN */ #define ROUND512(a,b,c,d,e,f,g,h) \ s0 = W512[(j+1)&0x0f]; \ s0 = sigma0_512(s0); \ s1 = W512[(j+14)&0x0f]; \ s1 = sigma1_512(s1); \ T1 = (h) + Sigma1_512(e) + Ch((e), (f), (g)) + K512[j] + \ (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); \ (d) += T1; \ (h) = T1 + Sigma0_512(a) + Maj((a), (b), (c)); \ j++ void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) { sha2_word64 a, b, c, d, e, f, g, h, s0, s1; sha2_word64 T1, *W512 = (sha2_word64*)context->buffer; int j; /* Initialize registers with the prev. intermediate value */ a = context->state[0]; b = context->state[1]; c = context->state[2]; d = context->state[3]; e = context->state[4]; f = context->state[5]; g = context->state[6]; h = context->state[7]; j = 0; do { ROUND512_0_TO_15(a,b,c,d,e,f,g,h); ROUND512_0_TO_15(h,a,b,c,d,e,f,g); ROUND512_0_TO_15(g,h,a,b,c,d,e,f); ROUND512_0_TO_15(f,g,h,a,b,c,d,e); ROUND512_0_TO_15(e,f,g,h,a,b,c,d); ROUND512_0_TO_15(d,e,f,g,h,a,b,c); ROUND512_0_TO_15(c,d,e,f,g,h,a,b); ROUND512_0_TO_15(b,c,d,e,f,g,h,a); } while (j < 16); /* Now for the remaining rounds up to 79: */ do { ROUND512(a,b,c,d,e,f,g,h); ROUND512(h,a,b,c,d,e,f,g); ROUND512(g,h,a,b,c,d,e,f); ROUND512(f,g,h,a,b,c,d,e); ROUND512(e,f,g,h,a,b,c,d); ROUND512(d,e,f,g,h,a,b,c); ROUND512(c,d,e,f,g,h,a,b); ROUND512(b,c,d,e,f,g,h,a); } while (j < 80); /* Compute the current intermediate hash value */ context->state[0] += a; context->state[1] += b; context->state[2] += c; context->state[3] += d; context->state[4] += e; context->state[5] += f; context->state[6] += g; context->state[7] += h; /* Clean up */ a = b = c = d = e = f = g = h = T1 = 0; } #else /* SHA2_UNROLL_TRANSFORM */ void SHA512_Transform(SHA512_CTX* context, const sha2_word64* data) { sha2_word64 a, b, c, d, e, f, g, h, s0, s1; sha2_word64 T1, T2, *W512 = (sha2_word64*)context->buffer; int j; /* Initialize registers with the prev. intermediate value */ a = context->state[0]; b = context->state[1]; c = context->state[2]; d = context->state[3]; e = context->state[4]; f = context->state[5]; g = context->state[6]; h = context->state[7]; j = 0; do { #if BYTE_ORDER == LITTLE_ENDIAN /* Convert TO host byte order */ REVERSE64(*data++, W512[j]); /* Apply the SHA-512 compression function to update a..h */ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + W512[j]; #else /* BYTE_ORDER == LITTLE_ENDIAN */ /* Apply the SHA-512 compression function to update a..h with copy */ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + (W512[j] = *data++); #endif /* BYTE_ORDER == LITTLE_ENDIAN */ T2 = Sigma0_512(a) + Maj(a, b, c); h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a = T1 + T2; j++; } while (j < 16); do { /* Part of the message block expansion: */ s0 = W512[(j+1)&0x0f]; s0 = sigma0_512(s0); s1 = W512[(j+14)&0x0f]; s1 = sigma1_512(s1); /* Apply the SHA-512 compression function to update a..h */ T1 = h + Sigma1_512(e) + Ch(e, f, g) + K512[j] + (W512[j&0x0f] += s1 + W512[(j+9)&0x0f] + s0); T2 = Sigma0_512(a) + Maj(a, b, c); h = g; g = f; f = e; e = d + T1; d = c; c = b; b = a; a = T1 + T2; j++; } while (j < 80); /* Compute the current intermediate hash value */ context->state[0] += a; context->state[1] += b; context->state[2] += c; context->state[3] += d; context->state[4] += e; context->state[5] += f; context->state[6] += g; context->state[7] += h; /* Clean up */ a = b = c = d = e = f = g = h = T1 = T2 = 0; } #endif /* SHA2_UNROLL_TRANSFORM */ void SHA512_Update(SHA512_CTX* context, const sha2_byte *data, size_t len) { unsigned int freespace, usedspace; if (len == 0) { /* Calling with no data is valid - we do nothing */ return; } /* Sanity check: */ assert(context != (SHA512_CTX*)0 && data != (sha2_byte*)0); usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH; if (usedspace > 0) { /* Calculate how much free space is available in the buffer */ freespace = SHA512_BLOCK_LENGTH - usedspace; if (len >= freespace) { /* Fill the buffer completely and process it */ MEMCPY_BCOPY(&context->buffer[usedspace], data, freespace); ADDINC128(context->bitcount, freespace << 3); len -= freespace; data += freespace; SHA512_Transform(context, (sha2_word64*)context->buffer); } else { /* The buffer is not yet full */ MEMCPY_BCOPY(&context->buffer[usedspace], data, len); ADDINC128(context->bitcount, len << 3); /* Clean up: */ usedspace = freespace = 0; return; } } while (len >= SHA512_BLOCK_LENGTH) { /* Process as many complete blocks as we can */ SHA512_Transform(context, (sha2_word64*)data); ADDINC128(context->bitcount, SHA512_BLOCK_LENGTH << 3); len -= SHA512_BLOCK_LENGTH; data += SHA512_BLOCK_LENGTH; } if (len > 0) { /* There's left-overs, so save 'em */ MEMCPY_BCOPY(context->buffer, data, len); ADDINC128(context->bitcount, len << 3); } /* Clean up: */ usedspace = freespace = 0; } void SHA512_Last(SHA512_CTX* context) { sha2_word64 *p; unsigned int usedspace; usedspace = (context->bitcount[0] >> 3) % SHA512_BLOCK_LENGTH; #if BYTE_ORDER == LITTLE_ENDIAN /* Convert FROM host byte order */ REVERSE64(context->bitcount[0],context->bitcount[0]); REVERSE64(context->bitcount[1],context->bitcount[1]); #endif if (usedspace > 0) { /* Begin padding with a 1 bit: */ context->buffer[usedspace++] = 0x80; if (usedspace <= SHA512_SHORT_BLOCK_LENGTH) { /* Set-up for the last transform: */ MEMSET_BZERO(&context->buffer[usedspace], SHA512_SHORT_BLOCK_LENGTH - usedspace); } else { if (usedspace < SHA512_BLOCK_LENGTH) { MEMSET_BZERO(&context->buffer[usedspace], SHA512_BLOCK_LENGTH - usedspace); } /* Do second-to-last transform: */ SHA512_Transform(context, (sha2_word64*)context->buffer); /* And set-up for the last transform: */ MEMSET_BZERO(context->buffer, SHA512_BLOCK_LENGTH - 2); } } else { /* Prepare for final transform: */ MEMSET_BZERO(context->buffer, SHA512_SHORT_BLOCK_LENGTH); /* Begin padding with a 1 bit: */ *context->buffer = 0x80; } /* Store the length of input data (in bits): */ p = (sha2_word64 *)&context->buffer[SHA512_SHORT_BLOCK_LENGTH]; p[0] = context->bitcount[1]; p[1] = context->bitcount[0]; /* Final transform: */ SHA512_Transform(context, (sha2_word64*)context->buffer); } void SHA512_Final(sha2_byte digest[], SHA512_CTX* context) { sha2_word64 *d = (sha2_word64*)digest; /* Sanity check: */ assert(context != (SHA512_CTX*)0); /* If no digest buffer is passed, we don't bother doing this: */ if (digest != (sha2_byte*)0) { SHA512_Last(context); /* Save the hash data for output: */ #if BYTE_ORDER == LITTLE_ENDIAN { /* Convert TO host byte order */ int j; for (j = 0; j < 8; j++) { REVERSE64(context->state[j],context->state[j]); *d++ = context->state[j]; } } #else MEMCPY_BCOPY(d, context->state, SHA512_DIGEST_LENGTH); #endif } /* Zero out state data */ MEMSET_BZERO(context, sizeof(*context)); } char *SHA512_End(SHA512_CTX* context, char buffer[]) { sha2_byte digest[SHA512_DIGEST_LENGTH], *d = digest; int i; /* Sanity check: */ assert(context != (SHA512_CTX*)0); if (buffer != (char*)0) { SHA512_Final(digest, context); for (i = 0; i < SHA512_DIGEST_LENGTH; i++) { *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4]; *buffer++ = sha2_hex_digits[*d & 0x0f]; d++; } *buffer = (char)0; } else { MEMSET_BZERO(context, sizeof(*context)); } MEMSET_BZERO(digest, SHA512_DIGEST_LENGTH); return buffer; } char* SHA512_Data(const sha2_byte* data, size_t len, char digest[SHA512_DIGEST_STRING_LENGTH]) { SHA512_CTX context; SHA512_Init(&context); SHA512_Update(&context, data, len); return SHA512_End(&context, digest); } /*** SHA-384: *********************************************************/ void SHA384_Init(SHA384_CTX* context) { if (context == (SHA384_CTX*)0) { return; } MEMCPY_BCOPY(context->state, sha384_initial_hash_value, SHA512_DIGEST_LENGTH); MEMSET_BZERO(context->buffer, SHA384_BLOCK_LENGTH); context->bitcount[0] = context->bitcount[1] = 0; } void SHA384_Update(SHA384_CTX* context, const sha2_byte* data, size_t len) { SHA512_Update((SHA512_CTX*)context, data, len); } void SHA384_Final(sha2_byte digest[], SHA384_CTX* context) { sha2_word64 *d = (sha2_word64*)digest; /* Sanity check: */ assert(context != (SHA384_CTX*)0); /* If no digest buffer is passed, we don't bother doing this: */ if (digest != (sha2_byte*)0) { SHA512_Last((SHA512_CTX*)context); /* Save the hash data for output: */ #if BYTE_ORDER == LITTLE_ENDIAN { /* Convert TO host byte order */ int j; for (j = 0; j < 6; j++) { REVERSE64(context->state[j],context->state[j]); *d++ = context->state[j]; } } #else MEMCPY_BCOPY(d, context->state, SHA384_DIGEST_LENGTH); #endif } /* Zero out state data */ MEMSET_BZERO(context, sizeof(*context)); } char *SHA384_End(SHA384_CTX* context, char buffer[]) { sha2_byte digest[SHA384_DIGEST_LENGTH], *d = digest; int i; /* Sanity check: */ assert(context != (SHA384_CTX*)0); if (buffer != (char*)0) { SHA384_Final(digest, context); for (i = 0; i < SHA384_DIGEST_LENGTH; i++) { *buffer++ = sha2_hex_digits[(*d & 0xf0) >> 4]; *buffer++ = sha2_hex_digits[*d & 0x0f]; d++; } *buffer = (char)0; } else { MEMSET_BZERO(context, sizeof(*context)); } MEMSET_BZERO(digest, SHA384_DIGEST_LENGTH); return buffer; } char* SHA384_Data(const sha2_byte* data, size_t len, char digest[SHA384_DIGEST_STRING_LENGTH]) { SHA384_CTX context; SHA384_Init(&context); SHA384_Update(&context, data, len); return SHA384_End(&context, digest); }